Satellite T130 - hdmi output not working not

Similar Questions

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Satellite T130 - HDMI display does not

  Hello

  I'm trying to view my Toshiba Satellite T130 on my Toshiba 32 '' LCD TV, model 32BV702B, using an HDMI cable. The computer recognizes the TV and when you use desktop double or extended, the builtin laptop screen behaves as expected. However, the TV shows "No Signal" when the HDMI input is selected.

  We have another laptop with an HDMI output, and this configuration works very well. On two laptops, we use a 1366 x 768 display.

  Anyone know how I can get this working on the Toshiba laptop?

  Thank you.
  Ellie.

  (P.S. It seems that someone had a similar problem: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=205123]. In this case, the solution was to use a VGA instead of HDMI cable and the original problem has not been resolved. I really want to use my HDMI cable!

  Well, the other option attempts to retrieve the laptop using the HARD drive recovery or a recovery created with preinstalled Toshiba Recovery creator software image.

  I read that the other thread and the other user did not try this
  On the other hand, you can try to set the default BIOS and save the changes. Do not forget that the HDMI is it activated.

  Also, try this:
  Disconnect the battery and AC adapter
  Wait a few hours (3-4 hours) and then press the power button / stop for 30 seconds.
  Connect the two parts, and then test the laptop computer s HDMI.

• HP Pavilion TouchSmart 15-n029: HDMI output not working not not on HP Pavilion 15

  Hi guys, I'm new here on the HP Forum.

  My problems started when I got my new laptop and I HATED windows 8.

  If one of my friends had a drive with Windows 7 above.

  After installation nothing worked, no WiFi, USB, HDMI and so on.

  I have serched the days for new drivers and found most of them on the website of HPs.

  But I was not disabled to find a job for my HDMI output driver.

  You guys can help me with this?

  Jesper Forsberg - Sweden

  Hello:

  The only suggestion I can offer would be to try the AMD graphics driver, if you don't have already done.

  Your laptop is not supported by HP for W7 and especially not supported for 32-bit operating systems.

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2032

  As a last resort, try to manually install the W7 x 64 graphics driver from the support page and the driver of your laptop (sp66999).

  I explored the driver file, and there are 32-bit included in this file drivers.

• My Satellite L755 HDMI - output 16 M has stopped working

  Hello!

  I have been for long the my Satellite L755 HDMI connection to a TV, but a few days ago it stopped working. The laptop detects the TV and identifies it as Samsung, but there is no signal on the TV screen.

  Outputs HDMI to the TV and cable are ok because I can run other devices. Tried to activate HDMI thanks to push "FN" + "F5" key (I choose the TV screen), changed the resolution, updated Nvidia drivers, nothing works. My OS is Win7 64.

  I know that the only signal is seen on TV, the screen is when I restart the computer; the I can see on the image on the screen of the TV for a few seconds (while "starting windows" is displayed) and not good image, with lots of red vertical lines on the screen. After a few seconds, no signal again on the TV screen

  Can anyone help? Maybe it's a hardware failure?
  The laptop is no longer under warranty.

  Thank you.

  Hello

  It is not easy to say what may be wrong with that. I think that it will help much, but have you tested the feature with different HDMI ports on the TV?
  Have you tried to roll back the OS (System Restore) to an earlier time when everything was OK?

  On this virtual path, that it is not possible to provide the diagnostic but ultimate test right, you can do if you reinstall OS using original recovery image and test in functionality with the factory settings.

  What do you think of all this?

• Satellite T130-16w does not always

  Satellite T130-16w, more often than otherwise it does not.
  Is it far from solving this.

  Someone has looked at and said it's battery if it was he would not charge at all.
  Could there be an error in the connection?

  Hello

  It of difficult to tell if it s just one problem of battery or perhaps more serious hardware problems.

  But I think that the battery needs to be checked at the first step.
  You must also remove the battery and must run the laptop connected only to the power adapter.
  The unit should work fine without a battery.

  The point is that there's not much other option that requires a check if its not the battery or AC adapter problem, then probably the motherboard is affected

• NVIDIA HDMI output - not plugged in (?) = no sound on the TV, but great picture!

  Hello

  I'm not very experienced in the computer, but I know now that the connection from your laptop to a flat screen HDMI cable TV is not as easy as it should be...

  Description of the problem: no sound, but the big picture on the TV when connecting to my HP dv7 entertainment PC through HDMI to it. Specifically: for NVIDIA HDMI output icon is grey and not active in the "pilot sounds and reading - menu" - you can not simply give (other icons that are active are: speakers and headphones double, double independent headphone & SPDIF). You can also see the TV under "Control panel" > "Devices and printers" - so the tv is connected. In Device Manager, I see that I have 2 sound processors (?) "IDT High Definition Audio CODEC" and "NVIDIA High Definition Audio" - I don't know one that is used for the HDMI connection.

  I have at my own risk installed the latest driver (?) for my graphics (NVIDIA Geforce 9600 M GT) - before I did, the NVIDIA HDMI output icon participated actively in the "... sound"-menu (so you can turn it, etc.)- but no sound on the TV and then either...

  I suspect there to be something wrong with the drivers for my graphics card or processor... or maybe you can't send sound to the tv with my cable? It's a standard HDMI cable...

  Laptop model nr: HP Pavilion dv7-1094eo

  Operating system: Windows 7 Professional 64-bit don't know ServicePack... .

  Graphics card: NVIDIA GeForce 9600M GT

  HDMI cable, tv LCD Philips model: 37PFL7605H

  If someone could help please advise me on what drivers to install or anything else, I would be very grateful!

  / Marie
  

  First do you uninstall IDT High-Definition Audio CODEC Driver and NVIDIA GeForce 9600 M GT drivers by going to

  Control Panel\Programs\Programs and features.

  In case if request you a restart of the computer, please make sure that restart you one after the other. Do NOT avoid restarting the computer.  So go ahead and download view updated and audio drivers from the HP website here.

  Yet once, after installation if you are prompted to restart the computer, go ahead and restart the computer. Once done, go to:

  Control Panel\Hardware and the sound and click on sound. On the Read tab, right-click on the white (empty) space and you will see 2 options (see the disabled devices and show disconnected devices). Make sure that both options are checked for all devices listed reading.

  Now, right click on the option to output HDMI device and make sure that the option "set as default device" is selected for the sound of the external display during playback picture on external monitor.

• Satellite R630 - HDMI does not work

  I tried to connect my Satellite R630 X HDMI with my Sharp LC-32XL8E of Full HD 1080 p TV.

  The tv will recognize the connection but indicates an 'incompatible signal' and remains black.
  The Satellite rotates the screen in black and will only be if I disconnect the HDMI cable.

  If I connect via RGB too, the Satellite will operate in RGB and (!) HDMI mode, but with the native resolution of 1366 x 768.
  Try to use the RGB Mode and changing the resolution 1920 x 1080, any resolution above 1400 will not appear.

  I think that the Sharp and the Satellite will not be correct on the possible resolutions.
  Two other laptops (old!), I tried with the same tv works well: I connect the tv and the tv will show the desktop in the right way.

  What can I do? I can't access all the options while the laptop is connected by HDMI, because both screens will only show black screens. When I disconnect, the satellite will give not any possibility to set a monitor, which is not actually connected.

  Hi Verwaiser,

  How do you spend the TV? You can test the FN + F5 key for this combination. Then, you can switch between all monitors (internal and external).

  In addition I would test another cable in your case.

  Also try to update the display driver. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• DisplayPort and HDMI output not working not

  Hello

  I updated my drivers yesterday (3/13). I then connected DP HDMI adapter, the software recognizes the external TV.  Yay!

  I changed the option to Clone = built-in screen + external monitor and I tried different resolutions.  TV resolution is 1920 x 1080 however this resolution was NOT available, that's why I created this manually (replaced the existing one - I did not see the existing, but he asked anyway).

  Then I tried option Clone = external monitor + built-in screen and I have tried many different resolutions.

  I couldn't picture for TV outside.

  I have windows THAT XP Pro 32-bit.

  Help, please.

  Thank you

  Thanks to all who have posted.  I bought the DP-> HDMI adapter listed in the lenovo.com website.  Now it works very well including audio.

• ATI HDMI Output not connected

  I have Windows 7 sp1. For a long time, that I got my computer hooked to a receiver and television there successfully. I change the source from the receiver to my computer and be able to play music through the receiver and show my screen on my TV. Then, Windows update has come and it has stopped working. For a long time, that I had to cancel the updates made by windows update and then my ATI HDMI would work again. Well, I waited too long to regularize updates this time and now it doesn't work anymore - and I can't return updates when it worked (too long). So, now I want to just fix.

  I have installed all the latest drivers - AMD, still does not work.

  Read said a KB on a fix - which didn't work - it does not apply to this computer - prolly because Im already in sp1.

  Read on the reboot of Windows Audio Endpoint - which did not

  At this point, I don't know what to do. Help, please.

  Thank you in advance.

  I found the solution after a year or two to support the windows updates!

  See:

  http://www.overclock.NET/t/1028415/how-to-HDMI-sound-to-receiver-ATI-HDMI

  The problem was that after a set windows to update the monitor settings has changed. I changed my hide for that receiver tv/duplicate the current monitor -, and then the not connected thing went.

  Amazing!

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Satellite A300: Optical output really works - Digital 5.1 sound

  I own the 1lt A300 model.

  In the specification, it says there's an optical output (shared with headphone connector). So I was wondering, is it really works?

  I have doubts about this, but I can't verify this because I don't have any optical input capable design at present.

  The plug is the same size that the headphone plug, so I was wondering is capable of piping 5.1 digital sound?

  Thank you...

  Hello

  I n t have experience with that but maybe that this document can help you to understand how it works:
  S/P-DIF helmet which connector could be used?

  Good bye

• HDMI does not not on Satellite L500-19Z

  I have a L500-19Z running Windows 7. Until yesterday, the HDMI output jack worked very well.
  However, now when I plug a cable in maintaining the screen goes blank and then back to normal.
  This continues for a few minutes and then when I try to output for example a TV it shows as not connected.

  Anyone have any ideas on what could be the cause?
  Device Manager indicates that the device is functioning OK and I checked that the driver is up-to-date.

  I am confused now!
  All responses may also be sent to [email protected]

  Hello

  Have you tried the Fn + F5 option?
  This switch, the video output for external monitor or TV.
  You have to press several times to select the TV.

  The value also default BIOS and test again

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• Output HDMI does not work on Satellite L775

  Hello.

  I have a new Toshiba Satellite L775 with HDMI output.

  I wanted to connect the laptop to my TV to watch pictures via HDMI.
  But it did not work.
  I connected the laptop with HDMI cable for my Samsung - LCD - TV screen.
  Time, wireless and TV are already functioning. (Normally I use the cable for TV receiver, with no problems).

  I tried to change the output with Fn + F5 to TV-monitor (or TV-monitor & laptop).
  But the TV does not detect not the laptop, in any case.

  What's wrong?

  Thanks for the solutions.

  Best regards
  WE34

  I agree with Feliks if the TV supports different HDMI ports, you must make sure that the TV has been set to the correct HDMI port.
  Choose in the settings of the TV the HDMI port and then you can use Fn + F5 to switch to the TV output.