Satellite-T230D fails to create a recovery media

Similar Questions

• Satellite C650 - failed to create the recovery disk - error 020150-20-00000000 code

  I hope this is the right place to post this, but I think I have the same problem with my Satellite C650. He keeps wasting DVDs by stopping and saying that it cannot read the file E:\ZZlmg\11544XSP.swm and gives an error code 020150-20-00000000. The file is located on the DVD. I use Verbatim DVD - R The Recovery Media Creator is trying to write the first disc and is at the point of check data. Can you think of another explanation for this error other than the cheap DVD option? Thank you

  Hello

  There are two explanations;
  Either the CD/DVD drive firmware is not up to date and contains no information about the drives used discs (CD or DVD) is not fully compatible.
  As you know this is happening and is not uncommon.

  So first check if a firmware update is available for your CD/DVD drive.
  The European driver of Toshiba page is the right place to look for that.
  More details you will find in detail if the firmware has been published for your ODD.

  If there is no update firmware of your CD/DVD drive, then you should test other discs

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Failed to create system recovery media

  Hello

  I just got my Dell Inspiron 17R SE 7720 and on my first connection has been invited to create a backup of the plant. I tried to do it with DVD, after having burned the first disc, it invites to a second drive but rejects all additional drives. When trying on several different USB drives, I get an "Error occurred" message and I am unable to continue. Due to try several times, I now have several copies of the first disc of recovery media. I am extremely frustrated at the loss of my blank media, this computer should have come with the media in the first place! A person from Dell please respond and tell me how I'm supposed to get a copy of the media recovery for my computer when your authoring software that meda is defective?

  Kind regards

  Craig Phillips

  Same thing here. I just got a new '' 12 and every time I try to create the recommended recovery media, then it comes up with ' year error occurred. " I'm trying to create it on a usb flash drive 2 GB larger than what is needed to create the media and via a usb 3.0 port. If I find a solution, then I will post it here.

• Satellite U840T - cannot create USB recovery media

  Can someone advise please - I have a new U840T Satellite with SDDS and try to create a recovery media using a USB key.

  The Toshiba 'Recovery Media Creator' inviotes I plug a USB key at least 10.4 G. So, I inserted a new USB 16G. The app clearly did not see this, even if it is recognized by the PC itself, no problem.

  When I press 'create' to load the stick, the app just says: "the process of creation for all media was cancelled" is not only wrong spelling, but completely useless.

  I do something wrong, ir is just a very poor app?

  Thank you very much...

  Hello

  Format you the USB drive before you start the Toshiba recovery media creator tool?
  Please format the USB key, then run the Toshiba Recovery Media Creator.

  Here are some details how to use the TOSHIBA Recovery Media Creator
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

• Failed to create the recovery on my Satellite A300-29N using Sony DVD disc

  Hello

  Tried to do the recovery disk for Toshiba A300-29N using Sony DVD new, always make a mistake. Toshiba service center confirmed that Sony DVD is not compatible with this DVD player.
  The one facing this problem and any updates. Tried with DVD Imation, it worked fine
  Concerning
  Samir

  I do not use a Sony DVD but TDK or Verbatim DVD-R support. Whenever I used it I was able to create a recovery media. No problem at all.
  I recommend you do the same thing. Believe me, it will not work correctly.

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite T110-12 t - creation of recovery media

  I recently bought one handed to nine Toshiba Satellite T110-12 t and am trying to create a recovery on 2 x DVD media. It is now approahing 2 hours and the gas indicator is still about 50% of the first disc!

  Someone can you please advise me if this is normal or should I give up and start again? What is your experience of time?

  Hi OfficerDibble,

  Usually create the recovery media takes less than an hour.

  I put t know what s going bad on your laptop, but it could be related to low quality mediums you use. I have good experiences with the DVD-R media (NOT of DVD + R) of Verbatim and TDK. It still works fine and I recommend these high quality media.

  As far as I know Satellite T110 also offers an option to create files on USB recovery. Have you already tried that?

• HP Envy X 2: laptop recovery partition (D) merged with another partition, not be able to create a recovery media

  I have merged my restore partition HP with another partition I created. Data recovery files are still intact in the New Partition. I have not created a recovery media. When I tried to create the USB Flash Drive recovery using recovery HP Manager media, I get the message that "recovery partition does not exist. How to get again the merged recovery partition and create a recovery USB Flash drive. If simply copy data from recovering files to a USB flash drive will work as a Bootable media in the case that need if in the future.

  @joy1964: should not have done that.  Messing around with the OEM partition somehow good enough recovery ensures it won't work not later, when you need it.

  Personally, I don't trust recovery integrated systems in any case.  You want to be able to recover from an image stored on a disk system large capacity Flash DRIVE or external.  In this way, if the disk fails, I can restore a functional system within minutes.

  Consider using a third-party product known as Macrium Reflect this.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  AND... you no longer have the recovery partition at all and can reuse that space for something else.

• HP Pavilion 15-p020ca: create USB recovery media, delete the Lexar USB encryption?

  Hey guys, try to create USB recovery media. Want to know if the Encrypt-a-Stick Lexar software should be removed from USB before that. Or, can be used to password protect the USB recovery media? Don't think it's necessary, but if it can be used I could go that route. Thank you, pcpunk

  Hello

  Please remove, make one a blank USB key.

  Kind regards.

• Yoga 2 pro - lack of default boot device or startup failed. Insert the recovery media and press a key.

  Hello

  I have a Yoga pro 2.

  I recently formatted my drive and got rid of all partitions. The reinstalled windows 8.

  Everything worked well until I went into the bios and changed the legacy boot uefi support.

  I get this is now pop up when I boot.

  By default, lack of start-up or start-up device failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or boot recovery media.

  I have no support from reccovery.

  I tried to restart the mchine pressing F2, but I still get the same screen.

  If I press on enter I then move the pop up to the Boot Manager when the list is empty, so I can't start any other readers because there is not to choose.

  I don't know what else to do...

  Help, please.

  SEB

  Mod edit: System model added to the subject line to improve visibility / clarity

  Shut down the laptop computer

  Press the NOVO button to start

  Select Configuration of the BIOS in the menu that appears

  Return to the legacy

  Exit saving changes

  Restart and check.

• HP Notebook PC 15: create system recovery media

  my laptop has a message asking to "create a system recovery media. Since the purchase of the laptop, I have upgraded to win10 (the free version online), of win8.1, which I upgraded to 8.0 immediately after purchase. I have a set of 3 drive recovery I think I did when I bought the HP. The instructions indicate that only a game can be made. In addition, the instructions show that more than 3 disks are required. But when I start the process only a USB option is available. How can I determine if the 3 disc set is the right game for this PC? I'm confused.

  Hello slickamis;

  Let me welcome you on the HP forums!

  I read your post on creating recovery media and wanted to help.

  If you create HP recovery support before proceeding with the upgrade to Win10, it's a waste of time trying to do it now.  Why?  Two reasons...

  First of all, the update of Win10 has a bad history of corrupting the recovery OEM information, and if this happens to you, any media that you create does not work.

  Second, that the media would have been for the original operating system, and the recovery information are not updated when you upgrade the Win10.  So the media could serve as a recovery of Win10.

  My suggestion is if you want to create a recovery media for Win10, then consider using a third-party solution known as Macrium reflect (MR).

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Failed to create the recovery dvd set... advice?

  Just got a new laptop dv7-1240us brand.

  When I try to create the recovery DVD, it seems to go through the first creation of dvd, and then gives me the following error message:

  Error detected during the disk check.

  A new drive should be created.

  I have 4 dvd Memorex coasterized this so far.  Is there something I could do wrong?

  This error code is very comman problem do a recovery media. Given that this product is still under warranty call 1-800-474-6836 and talk to the hp tech agent. Basically, explain the tech agent I have tried several times to create my recovery media, but he receives on the disk 1 can you please send them to me it's really frustrating. The recovery media must be sent free of charge.

• How to create a recovery media in Windows 8?

  You can become the owner of a new HP laptop, but unsure of how to create the recovery media so that it can be restored if this scenario arise.

  This video explains the process of creating the recovery media in Windows 8 on HP systems.

  I hope this information is useful for some.

• Create a recovery media using a USB Flash drive

  Computer SONY Vaio laptop model #SVE14A35CXH Windows 8

  I'm unable to create a recovery media using a USB Flash drive.

  The computer recognizes the flash drive in my computer as drive E. When I try to create the recovery through media sat DOWN, my flash drive is not recognized.

  If anyone has had this problem and if so; How can I fix it?

  Hi cmptrsue, are there any error messages? Is it possible to create another recovery media using another usb drive? You can use this link as a guide in creating a.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/LapMagWin