Failed to create system recovery media

Similar Questions

• Satellite-T230D fails to create a recovery media

  I have a T230D Satellite under Windows 7 Home Premium. When you try to create a recovery media using a USB key, the process begins by informing the Flash DRIVE will be formatted.
  At this point, it fails with the error code 040EAE-57-00000000. The USB key is left in an unusable state and cannot be reformatted by Windows.

  The HP USB Format utility is able to reformat the USB drive.
  Before you begin to create the recovery media application, I disabled VirusControl, firewall and Internet access to make sure that nothing got in the way. I tried this twice with the same result both times.

  Can you please tell us what USB device you are using?
  Have you tested with different keys memory USB flash?

• HP Notebook PC 15: create system recovery media

  my laptop has a message asking to "create a system recovery media. Since the purchase of the laptop, I have upgraded to win10 (the free version online), of win8.1, which I upgraded to 8.0 immediately after purchase. I have a set of 3 drive recovery I think I did when I bought the HP. The instructions indicate that only a game can be made. In addition, the instructions show that more than 3 disks are required. But when I start the process only a USB option is available. How can I determine if the 3 disc set is the right game for this PC? I'm confused.

  Hello slickamis;

  Let me welcome you on the HP forums!

  I read your post on creating recovery media and wanted to help.

  If you create HP recovery support before proceeding with the upgrade to Win10, it's a waste of time trying to do it now.  Why?  Two reasons...

  First of all, the update of Win10 has a bad history of corrupting the recovery OEM information, and if this happens to you, any media that you create does not work.

  Second, that the media would have been for the original operating system, and the recovery information are not updated when you upgrade the Win10.  So the media could serve as a recovery of Win10.

  My suggestion is if you want to create a recovery media for Win10, then consider using a third-party solution known as Macrium reflect (MR).

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite L830-16W: unable to create system recovery media

  Hello

  Trying to create a system restore on 3 discs DVD-R media.

  Set creation failed twice during the audit of the 2nd disk with the following error: -.

  "Cannot read the following file:-

  "D:\ZZImages\ZZImages\install21.swm (error Code: 020150-20-00000000).

  Someone at - it an idea how to solve the problem?
  Don't want to lose the DVD-r on failed burns.

  Kind regards
  Ken

  Hi Ken

  As far as I know there is not a lot, you can do about it. Either it works or not.

  Is there an option to create recovery USB key? If so have you tried?

• Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

  Hello

  I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

  It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

  Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

  Any notice received with gratitude.

  Thank you

  I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

  You have a friend that can give/sell you a blank DVD?

  Ron

• HP Envy X 2: laptop recovery partition (D) merged with another partition, not be able to create a recovery media

  I have merged my restore partition HP with another partition I created. Data recovery files are still intact in the New Partition. I have not created a recovery media. When I tried to create the USB Flash Drive recovery using recovery HP Manager media, I get the message that "recovery partition does not exist. How to get again the merged recovery partition and create a recovery USB Flash drive. If simply copy data from recovering files to a USB flash drive will work as a Bootable media in the case that need if in the future.

  @joy1964: should not have done that.  Messing around with the OEM partition somehow good enough recovery ensures it won't work not later, when you need it.

  Personally, I don't trust recovery integrated systems in any case.  You want to be able to recover from an image stored on a disk system large capacity Flash DRIVE or external.  In this way, if the disk fails, I can restore a functional system within minutes.

  Consider using a third-party product known as Macrium Reflect this.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  AND... you no longer have the recovery partition at all and can reuse that space for something else.

• How can I create system recovery disc for a new laptop with windows 7 Home Premium?

  I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

  In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

  Jim

  You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
  Kerry Brown MS - MVP - Windows desktop experience

• Lodge B5S08UA: {Thae system recovery media don't dose not support this computer

  After I bought it, I created the back upward on ((recovery media)) the DVD before doing anything. Now I have and I want to install it to the PC ((HP Pavilion M6-1045dx))

  can someone help me?

  Thae system recovery media dose not support this computer, you are not able restor this system with the media

  Hi @ako89kurdish,

  Thank you for posting. I read your post, and I understand that you have received the message "system recovery media does not support this computer."

  Error message in Windows 7 HP system recovery: "the system recovery disks do not support this computer."

  One of the following errors open when you try to use recovery disks:

• Yoga 2 pro - lack of default boot device or startup failed. Insert the recovery media and press a key.

  Hello

  I have a Yoga pro 2.

  I recently formatted my drive and got rid of all partitions. The reinstalled windows 8.

  Everything worked well until I went into the bios and changed the legacy boot uefi support.

  I get this is now pop up when I boot.

  By default, lack of start-up or start-up device failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or boot recovery media.

  I have no support from reccovery.

  I tried to restart the mchine pressing F2, but I still get the same screen.

  If I press on enter I then move the pop up to the Boot Manager when the list is empty, so I can't start any other readers because there is not to choose.

  I don't know what else to do...

  Help, please.

  SEB

  Mod edit: System model added to the subject line to improve visibility / clarity

  Shut down the laptop computer

  Press the NOVO button to start

  Select Configuration of the BIOS in the menu that appears

  Return to the legacy

  Exit saving changes

  Restart and check.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• How to create a recovery media in Windows 8?

  You can become the owner of a new HP laptop, but unsure of how to create the recovery media so that it can be restored if this scenario arise.

  This video explains the process of creating the recovery media in Windows 8 on HP systems.

  I hope this information is useful for some.

• Create product recovery media does not work after restoring to factory settings

  Updated my T500 from 160 to 320 GB.

  First of all, ran the RnR restore to factory settings with the product recovery media that I made earlier. And then restored my C: volume from my Windows Home Server backup.

  Everything seems as usual except my service partition is now f: instead of S: and my Lenovo partition is H: instead of q:-I tested it I can get into the RnR with F11 service partition.

  But when I try to create new recovery media product the ICT box is grayed out on the first prompt so I can't continue. Put back the partition of Lenovo on q: in disk management has not changed anything, he would let me change the letter of the service partition.

  It's no big deal - I still have my original disks - but it would be good to know what I could improve for the next time I have to do a restore.

  Think that I thought about it - when I restored my C volume I also restored a version of RnR who 'knows' I already burned disks. So next time if I want to burn new disks, I need to do on the version of the system factory setting before you restore the volume C:.

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U840T - cannot create USB recovery media

  Can someone advise please - I have a new U840T Satellite with SDDS and try to create a recovery media using a USB key.

  The Toshiba 'Recovery Media Creator' inviotes I plug a USB key at least 10.4 G. So, I inserted a new USB 16G. The app clearly did not see this, even if it is recognized by the PC itself, no problem.

  When I press 'create' to load the stick, the app just says: "the process of creation for all media was cancelled" is not only wrong spelling, but completely useless.

  I do something wrong, ir is just a very poor app?

  Thank you very much...

  Hello

  Format you the USB drive before you start the Toshiba recovery media creator tool?
  Please format the USB key, then run the Toshiba Recovery Media Creator.

  Here are some details how to use the TOSHIBA Recovery Media Creator
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm