Satellite U200: 3.60 and 3.70 BIOS work correctly

Similar Questions

• Satellite L40 - Sleed and standby does not work correctly

  I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".

  Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.

  What can I do to fix this and make "sleep" mode works correctly?

  Hello!

  In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
  http://EU.computers.Toshiba-Europe.com

  You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
  I found a great thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141529𢣙

  Good bye

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• Satellite U200 163: a bug in the bios with linux

  on my u200 163 (with the new bios 1.3 works well on XP), linux (2.6.17) as Mandrvia 2007 or Ubuntu Edgy new distributions does not start ok. After grub starts, two lines talking about the bios bug and memory address not E820 reserved and not using MMC...?
  Y at - it a bug in the bios? Can I change something in my bios?
  These linux distributions work very well on other PC...

  Thank you!

  Hi ft

  Unfortunately I have no explanation for what is happening exactly to your device, but don t forget that your device is not supported under Linux and also designed for Windows XP.

  Satellite U200 is more recent and it is possible that in a month next someone will do some Linux experience on this unit and reported it here.

  Good bye

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• Satellite A80 - 154 - keyboard and Touchpad are not working

  Hello

  I bought a Toshiba Satellite A80 154

  The keyboard doesn t work.
  I see the light, but no key worked. The same thing with the touchpad.
  I can t go into Bios.

  When I plug a keyboard and USB mouse in works fine.
  I am looking for a new Ebay. The best offers $ 24 + $ 6!

  I see in the Windows, the keyboard and the touchpad with one!
  I put t know what the problem is, but it's not a prob of Windows.
  It doesn t work either in Bios.

  Thank you for the help

  Hello

  It looks like a hardware problem.
  If the warranty is valid, you can contact the ASP in your country for a verification of the material.

  If the warranty is not valid, you can first check if the keyboard cable is properly connected to the motherboard.
  If it s properly connected then a keyboard failure is possible and it would be wise to check if a replacement would help solve this problem.

  Compatible parts can be ordered also from the ASP in your country.

• Satellite M45-S331: HotKey and HWSetup do not work

  The cold start I started getting a message "Hotkey has encountered an error and needs to close" and the function keys no longer work.

  I tried to install:

  T.BIOS'CEO driver 2.6usb2, modules Common Toshiba 1.99.10K, Toshiba Hotkey Utility 1.00.03K, diagnostic tool for Toshiba 3.0.9, Toshiba utility V1.00.06K

  Both leave the Web site from the CD provided to Toshiba and Toshiba. But I can't shortcut key for the function. Today I also noticed that in Start-adjustment-Control Panel-Toshiba HWsetup when I start it I get the error message "completed common Module.

  I am frustrated, can someone give me a procedure to make things work again.

  Thank you!

  Hello

  This device seems to be a mobile American that was designed for an American market. So I think you should download the drivers from the Toshiba site us.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Well, in addition, if you install the Toshiba drivers manually, so it is very important that you do this in the correct order.
  1 chipset utility at the beginning
  2. common modules (if available)
  3 driver graphic card
  4 etc.

  But why don't you use the Toshiba Recovery CD?
  All drivers are pre-installed on this CD and it works correctly.

• Satellite A300-243 - keyboard and touchpad has stopped working

  Hello everyone

  I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
  What should I do because you know that even if I can't get into the windows to uninstall this driver.

  Any way to do during windows startup?

  Hello

  Why you installed a driver for external keyboard? I've never heard of such drivers

  Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.

• Satellite P205D-S7802 - LAN and WLan has stopped working

  Hey all,.

  My problem is that all of a sudden all my network interfaces have stopped working. I don't think that my operating system is the problem because I run linux as well as windows and it does not work in any of the 2. Both my local network and my wireless lan doesn't work, please help.

  It's really rare that two devices; LAN and WLan stopped working and in Linux or Windows, you can use these cards.

  In my opinion, your laptop is OK, but I think that your router to malfunction.

  It would be the most simple and plausible explanation.

  Did you check the configuration of the router?

• Satellite L300-245 - LAN and WLAN does not work

  I bought a laptop L300-254.
  I installed the LAN and the LAN driveres wireless, but none of them works.

  What is the problem?

  > I installed the LAN and the wireless LAN drivers, but none of them works.

  What does that mean? Are card WLan and LAN card not recognized in Device Manager? Are there near yellow exclamation points mentioned cards?

  Or maybe the WLan and LAN card are recognized correctly, but you cannot connect to the internet through WLan or LAN?

  In this case, you should check the router settings and configuration!
  For me, it looks like the issue of the router if the two connections (Wlan & Lan) n t work!

• Drupal 7 and blogger do not work correctly on Firefox but on IE; the problems are quite specific; new problem.

  New problems on Drupal 7 and blogger who agree on IE. In Blogger, if I try to reply to a comment, I get a new window into the comments box that contains a new iteration of my Blogger template that I can't use. In Drupal 7, there are at least two modules that do not work correctly: the CKEditor GUI does not work and the filter of the Module does not work correctly. There is no error message, and the two modules work fine on IE and Chrome.
  There is nothing on the web that suggests or either of these Web sites is to have this kind of problems.
  Thanks for any help.
  David Hilfiker

  Hi david.hilfiker,
  Thank you for your question, I understand that this is happening on two sites. If this is not the case on other people's computers please try a restart of Firefox.
  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Since the installation of Firefox 4, I get this message "TypeError: components.classes['@ [cid] is undefined" when a window should open. Also saw print and print no longer work correctly.

  Since the installation of the latest version of Firefox, this message "TypeError: components.classes['@ [cid] is undefined" appears in a box when should open a new window. In addition, what you see in the Preview Print print, is not which prints.

  Recovering important data over an old profile

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  Check and tell if its working.

• my video and streaming does not work correctly, always stop.

  my video and streaming does not work properly, his game and stops all the time.

  Hello

  1. this happens when you play movies or videos saved on the computer?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  Method 2:

  If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• my Java Script and html do not work correctly in any other browser other than Internet Explorer

  original title: my html and Java Script do not work correctly in another browser other than Internet Explorer, which is not the only browser used with Windows. How can I fix it?

   

  -

  -

  600

  4

  6

  0 x 80000000000000

  15

  Windows PowerShell

  WIN-GRBD073PMKI

  +

  Function

  Has begun

  ProviderName = Function NewProviderState = SequenceNumber started = 5 HostName = ConsoleHost HostVersion = 2.0 HostId = 9 a 968549-639 a-4de1-9012-5b443edaae11 EngineVersion = RunspaceId = PipelineId = CommandName = CommandType = ScriptName = CommandPath = command line =.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  I hope that helps!

• Re: Satellite M100 - arrows left and right do not work

  I have a Satellite M100 and the keyboard down, left and right arrows don't work, the up arrow works always.

  No idea how can I fix? Thank you

  You can use these arrows (keys) in the BIOS settings?