Satellite U400 - 15 H BIOS update (DOS)

Similar Questions

• Satellite U400 - 12 p BIOS update problem

  Card mother name: Toshiba Satellite U400
  Part number: PSU40E-02300EG3
  BIOS type: Phoenix
  BIOS version: V3.00
  System BIOS date: 12/07/08
  Video BIOS date: 03/30/07

  Aida64 quick report
  http://www.fileserve.com/file/rQkvtxY/report.txt

  I tried to do the 4.70 update in Windows 7 64 bit, but WinPhlash64.exe is freeze my laptop and I don't have (I close all program and run is administrator but I do not have) I kill the antivirus task and close all programs set Compatibility Mode for WinPhlash64.exe for Windows XP (Service Pack 3) and run is administrator but I failed.

  I tried the UPDATE of WinPhlash BACK 32-bit or 64-bit, but I failed, "start this aplication canoe in dos mode".

  On your site I can't find my v3.00 Bios version and the 4.70 can update...
  * What I'd do people? *

  Thank you

  Post edited by: macak12

  Hello

  I've got the same laptop model and updated the BIOS to version 4.70 - Win and everything last week went well.

  I also have Win 7 OS but 32 bits.

  Just a question: have you you uncompress the package correctly before you run the exe file?
  You should do this in a folder created. Moreover in the majority of cases the VAP (value added package) must be installed on your machine.

  Check it!

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• Satellite U400 PSU44e - bad BIOS flash

  Hi all

  I had a big problem.
  Yesterday I was bios new flash 5.0 for my Toshiba u400, but he still on about 70% of 2 hours.
  I turn out of it.

  Then after plugging I see onlu black screen and nothing happends, I had something bios bad flash.

  I try with phoenix crisis recovery and a usb drive.
  I try with the toshiba via bootable CD bios update.
  I try to make the bootable CD with files BIOS.wph (and I change autorun.bat).

  I try this with the keys: fn + B, win + B and Fn + Esc (it's power led flashes after startup).

  What you suggest me?

  Service is the last option that I accepted.

  Concerning
  Alan

  Hello

  You should get in touch with Toshiba ASP in your country.

  Maybe the crisis disk BIOS could contribute to reflash the ROM module otherwise it could be possible that module ROM is damaged and motherboard needs to be replaced.

• Satellite A110 - 180 PSABOE - Bios update failure

  Hello.

  I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

  If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

  Thanks for your help.

  > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

  To me, it looks like the BIOS update procedure has no
  I'm afraid you have no other alternative besides contacting an ASP using m.

  It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

  I would recommend contacting the local ASP in order to solve this problem

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite C660 - 13r PSC0LE - BIOS update problem

  I bought the Satellite c660-13r 11.05.2011

  After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

  NOW I HAVE A BIG PROBLEM.
  1 POST takes 30 sec,
  2 start windows is slow
  3. laptop is so slow I can cry!
  4. when I open the new window or klick simply open the new link, stay for 3-4 sec

  and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
  I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

  How can I flasch BIOS with other versions,
  His big problem to work

  Thank you and I hope you can help me...

  Hello

  The version of the BIOS should be mentioned in the BIOS settings.
  Turn on the device, press F2 and verify the version here.

  Also I recommend the settings of the BIOS back to default settings.
  In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
  Restart the machine and check how many processes are running in the context of the BONE.

  I recommend disabling of certain non-essential processes in msconfig.
  There, you can go to the Startup tab and could uncheck the unnecessary process.

• Satellite C855 - 19 X - BIOS update problem

  Hi all

  I have a Satellite phone C855 - 19 X and the alert tempo TOSHIBA utility prompts me to update my BIOS. However when I am doing so I get the following message

  "Error".
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1"

  Does anyone have any experience with this kind of problem? Should I add this parameter, or is otherwise around it? Because the BIOS will be affected I hesitate to do so.

  Thank you in advance.

  Hello

  First of all, you should know that the update of the BIOS is a sensitive technique and using wrongly you can damage the motherboard. So be sure to always update the BIOS.

  Second, the update of the BIOS is not quite necessary in case your laptop runs correctly.
  You have problems using the laptop? Isn't it? Well, in this case I wouldn't touch the BIOS.

  However, the error message is telling as secure boot
  Secure boot is an available option in the BIOS settings. You should probably disable secure boot before running the BIOS update file.

• Satellite M40 - 307 (PSM44E) BIOS update

  Hello
  I'm actually having a satellite M40-307 with a BIOS version 1.2.
  Many of them came with BIOS v.1.3.
  If someone is having a 1.3 or a higher version of BIOS, I want to send him a Toshiba util to send me its firmware.

  Concerning

  Hi Etienne

  Don t think that a series of Satellite M40 PSM44E were shipped with the BIOS 1.3 or higher.
  Series only the BIOS 1.2 is available for the PSM44E. It s on the page of the Toshiba driver.

  Of course, you will also find an other BIOS updates; v1.7 and v2.0
  But these versions are released for other Satellite M40 series and are not compatible with the Satellite M40 * PSM44E.*

  Welcome them

• Satellite L670 - 1 FT Bios update failed

  I have a laptop "Satellite L670 - 1 FT" computer when the update of the BIOS does not.
  There is a possibility of screen WITHOUT doing a BIOS update, and if yes what do I need?

  I tried to copy the BIOS file. ROM on a USB key and start the laptop by pressing Fn + B.
  It takes about 5-10 sec for the stick, but unfortunately I still have no display.

  Thanks in advance

  + The message has changed: the content has been translated.

  If the BIOS is not successful, the ROM module must be flashed with special crisis disk BIOS
  Unfortunately, as far as I know something like this can be done by a Toshiba authorized service provider available in your country.

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• Re: Satellite C660 - after cooler BIOS update speed is increased and troubling

  Good evening
  Five hours ago, I did update the BIOS and restart the computer after that I noticed that the speed of the cooler is increased and worrying. Mention that they bought a Toshiba Satellite C660 last month.
  Please, if you can help me how to set the correct rotation!

  Thank you!

  PS: Sorry for my English I'm not from England!

  I think several people have posted about it here on this forum so it's a shame you don't l l check this forum before you took the decision to put the BIOS updated. If you have some time check other assignments in category C satellite.

  In any case, I can say, it's that you can try to reduce the speed of the cooling fan with cooling method option in the advanced power settings.

  This should reduce the speed of the cooling fan and your laptop will work a lot quieter. Put simply to option in battery mode.

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Satellite A30 - after the BIOS update I can not install any OS

  Hey everybody

  I have a problem with my laptop Toshiba Satellite A30 PSA33E. I update my old BIOS and 1.7 and now I have a problem: I can not install any OS on my PC because it stops whenever I try to install. After 50 tests, I installed a Windows SP2, but my PC turns off always.

  My CPU is at 100% after I launch mozilla so I guess my problem is the BIOS. I try to install v1.8 BIOS and is not working and I get an error (not compatible with the installed BIOS)

  Where can I find the 1.3, 1.4, 1.5 ROM BIOS? Can someone help me please?
  THX

  The latest version of the BIOS should not cause this kind of thing. Have reset you the BIOS to its default settings?

  Have you checked the CPU radiator for an accumulation of dust? A can of compressed Air can help remove dust through the vents.

  What was the reason that you updated the BIOS, in the first place? Had previous problems with the system?

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.