No sound on the computer after the upgrade to SP2

Similar Questions

• Plugin Flash races to come, has no sound, since the upgrade to Ubuntu, why?

  After update Ubuntu 11.04 to 12.04 (64-bit), embedded videos managed by the Flash plugin race advance to the download speed, totally ignoring the clock. They are also silent.

  Found the problem. It is an odd. Research in the application of the Volume control (not sure if it's one thing to Gnome or Xfce - desktop is Xfce), he showed that he was failing to try to play the audio stream through "Redwood HDMI Audio" due to a Radeon video card in the system. Turn off sub tab Configuration and having integrated Audio together the appropriate (in my case) audio analog stereo sound restorations that it fixes the problem Flash video--race to advance.

  What is crazy is that the video should come race due to an audio output doesn't work. How could Adobe have never programmed Flash with this addiction?

  In any case, it appears that in the cycle of upgrading Ubuntu insisted on bring back the HDMI audio in game. Which had been set correctly - off - before the upgrade. I have HDMI to my monitor, but its speakers are analog.

• Will be able to upgrade my Vista Home Premium, 32-bit Windows7 computer refuses to upgrade to SP2?

  Microsoft told me I can improve my Vista Home Premium to the Enterprise version of Windows7, but it will be a "clean install" (install uninstall complete.).  Should I wait for problems if my computer will not upgrade to Vista Service Pack 2? (I tried all kinds of solutions Microsoft FixIt and Disc Check).

  Hello

  1 have. what troubleshooting measures you tried?

  2. do you get any error code or error message by updating to service pack 2?

  If you can not upgrade to Service Pack 2 for Vista which should not cause concerns to a clean install of Windows 7 and you should be able to do well.

  I suggest that you run Upgrade Advisor before you start the installation of Windows 7.

  Windows 7 Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  And also bring to the top of the data before you start the installation of Windows.

  Back up your files: http://windows.microsoft.com/en-US/windows-vista/Back-up-your-files

  For more information, see the following Microsoft.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Hope the information is useful.

• Lost all sound from my computer after the updates

  Driver Audio original was ahead AC 97 Audio for VIA (R) audio controller.  During updates, this changed to C-Media AC 97 Audio Device. Now I have no sound.  When I check in the properties for C-Media I get the message "this device cannot start [Code 10] any ideas how to get back my sound."  Thank you

  If you still get the wrong driver of WU on your sound card, hide the update.

  You go to the website of the manufacturer (sound card) and get drivers.

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• NO sound on the upgrade to windows 8

  Help, I have a Pavilion dv6 1215sa (NZ851EA product number and I stupidly upgraded to windows 8 and now I have no sound. looks like what he is sound-all that think it is ok, but just no sound.)

  Windows have looked at my PC and told me to contact HP, and I'm going along in circles.

  Help I want a rear working laptop

  Cloud_Strider wrote:

  @soupy1972,.

  It seems that this device does not support Windows 8 based on the software page and drivers found here.  This means that a driver must be installed for Windows 8 or a driver of Windows 7 in compatibility mode.

  This process has worked for some to find an original driver of Windows 8.

  Otherwise, the Windows 7 driver should be installed in mode of compatibility as shown here.

  ---------------------------------------------------------------------------------------------

  @dc57,.

  I assume that you have the same problem, but for Windows 7 instead.

  It looks like this device might have Realtek or Conexant to the provider of the sound card.

  Visit this page and download the audio driver appropriate.  Download on the system, but do not install it again.

  Browse to the downloaded file.  Run the file and let the complete extraction of the process.  Note where the package was extracted to and cancel the installation, once you have the opportunity.

  Go to the extracted folder (usually c:\swsetup\filename).  Right-click on the setup.exe or Setup for audio driver and select Properties.  Select the Compatibility tab and select compatibility for Vista.  Some users have success by selecting XP on this property window.

  Click apply/ok, and then run setup.exe.

  This should install the audio driver in compatibility mode and give the best chance of success.

  Let me know what happens.

  Thank you very much! It worked! I get a refund for Windows 8, but realize that I couldn't reinstall Windows 7, so am not stuck with a BONE that I don't don't like, but now, thanks to the advice have sound!

• P7-1299cb: no sound for desktop computer after update to windows 10

  I have a desktop computer that used to run windows 7 and finally decided to upgrade to windows 10.  Update had no problems, but I have no sound.  I tried to update the driver through windows update and HP support assistant, both did not acknowledge the problem

  Windows update, I get the following message: IDT - Audio Device - IDT High Definition Audio CODEC - error 0x8007001f

  Please any advice would be appreciated.

  Thank you

  Hello:

  The page sheet product indicates that your PC came with W7 64 bit.

  I can tell you that there is no audio driver W10 32 bit.

  If you have inadvertently posted the wrong bit version, see if this W10 64-bit IDT audio driver works...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  Otherwise, there is a workaround solution that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• Pavilion DV6-2010sf: HP Pavilion DV6 Sound no longer works after Windows upgrade Windows 7 10

  After upgrade to Windows 7, no noise, even with icons on the screen at the bottom left and keyboard sound ON display.

  ATI driver high definition Audio Device was running OK.

  Audio CODEC IDT High definition driver was NOT working and unable to do so.

  I ran Windows Update but who has installed a new version of the drivers and Audio CODEC IDT High definition driver now works OK, still no sound even with icons indicating it is under tension.

  The HPSupportSolutionsFramework of the HP utility that is supposed to help can be downloaded: 10 seconds after download starts, it will stop ith error notification (and no explanation).

  Any help welcome.

  Hi @JFR77,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and no sound after a updated Windows 10. I uninstall that I listed in the audio, video and game controllers first and reboot the laptop. Then download the driver Audio IDT high definition (HD).

  You can try:

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  Here is a link to troubleshoot the sound.

  Please let me know how it goes.
  
  Thank you.

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• In the upgrade of the place.

  Hello

  I installed vista Home premium 32 bit sp1 from my microsoft dvd.

  Windows system update to sp2.

  If I wanted to achieve a place in the upgrade would be the option be grayed out?

  (Because of sp2 now on the system)

  Answers appreciated.

  SP levels are causing this problem.

  Read the General information below:

  Looking for a difference in numbers/Service Pack levels.

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to swap the disk to upgrade to a later version that includes the missing Service Pack.

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have installed.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed drive (Upgrade) Service Pack 1 and Service Pack 2 > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

  computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

  You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

• Cannot move photos to the computer after the upgrade to iOS10

  Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

  I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

  Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• P70 - A satellite - after victory 8.1 update no sound on the TV via HDMI

  Hello

  I bought my laptop 3 months ago and I didn't have any problems until today.
  Yesterday I updated to Windows 8.1 and since then, I have a problem with the HDMI output...

  I connect to my laptop to the TV and the video is ok but his continuous in the laptop.
  I go to control panel > Sound > playback, but the HDMI output icon is missing.
  I can only see the audio speakers (conexant HD Smart) icon

  I tried to restore my laptop to an earlier state (the only one I could choose was yesterday) and it worked fine, but when I changed my computer laptop and then changed again to a second display screen...
  . It happens again... Output HDMI icon disappeared again

  Anyone know if this has to do with the upgrade to windows 8.1?

  How can I fix because until yesterday, everything worked well
  Thank you

  P.D.: Excuse my English... I m from Spain

  I don't have this model, but on my Satellite everything works correctly after upgrade Win8.1.
  Have you installed upgrading Toshiba instructions and document of instructions to facilities offered on Toshiba download and support page?

  By the way: can you please send name of full model of your laptop?

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!