Connection of a fall AirPlay with AppleTV

Similar Questions

• Unexpected airPlay with AppleTV list after the iOS10

  Hello

  After 10 times my iPhone and iPad iOS update, I started to see some Apple TV which do not belong to me in my mailing list. For example, the 'Apple TV' and 'Living Room' in the picture.

  I checked my router and I'm sure that I only have my own devices inside my WiFi environment. In addition, I don't see these two unexpected in my Mac iTunes devices, as indicated below.

  

  I also did an experiment to unplug my Apple TV room and kitchen and then they disappear from the mailing list, while the other two unexpected are still there. I tried to contact them, and I was asked for passwords. So now I'm kind of confused why this happens. As I did not detect these two in either on my Mac mailing list or the list of the devices connected to my router, I think it might be some sort of bug introduced by iOS 10, given that I have never seen this before the update. I wonder if someone could please take a look at. thank you!

  Also, here's an update. I tested with another Mac that is updated for Sierra, and I also started seeing these AppleTV unexpected AirPlay list (as shown in the picture), while for my two other Mac on El Capitan, I don't see this problem.

  

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• Satellite C660 - connection WLAN keeps falling

  I have a Satellite C660 and when I try to go on internet connection continues to fall, I tried my son and the same things happening there, so I don't think this can be a problem with the router. I tried to download the lan drivers, but this did not help.

  Please help it's crazy of me and my son!

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  The problem can be solved by changing the WLAN economy option in Windows 7 management of power supply supported.

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Unable to connect to SMTP using TLS with a certificate self-signed on OSX 10.10.1 (T31.3 & 24.6)

  I can't connect to my server SMTP with TLS on port (send 465 or 587 / 995 receive) using Thunderbird 31.3 or my OS X 10.10.1 24.6 (Didier) MacBook Pro.

  However, I am able to send and receive mail from the same account on my Windows 7 machine using Outlook 2007, using the same settings I configured in Thunderbird. I added the certificate etc.

  http://img.Photobucket.com/albums/v631/Napoleon_BlownApart/ScreenShot2014-12-16at121323pm.PNG (Taken when using 24.6)

  I am the admin of the server and the password and other settings on the side Server are correct! (I'll take a look at the evolution at the same time. I am already back to an earlier version of Firefox because of sloppy coding and broken features).

  Any ideas?

  If the server name is a secret, how you expect to receive mail. Please, we have pretty bad without guessing. Seriously what you are done using a self signed certificate, they are free by https://www.startssl.com/

  My guess is it of OSX who dislikes the self-signed certificate, how Thunderbird to deal with Windows. As you have a copy install Thunderbird and see if it is a question of OSX.

• Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  https://support.Mozilla.com/en-us/KB/what-Firefox-sync

• I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  Mini Mac must be 2011 or later to use AirPlay > Use AirPlay to display video from your Mac to a HD TV

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• How to connect my iPhone via bluetooth with the mcd289 hi-fi sony

  Hi all

  I feel like this is a stupid question, but I can't for the life of understand me. I have an iPhone running iOS 9.1 5. I just bought a Sony CMT - X5CDB hi-fi Mcd289.

  It has built in bluetooth. I followed the instructions to associate my phone and listen to music from him, but he does not ever appears on the phone as a device for me to choose.

  Any ideas?

  Thank you

  Andrew

  Hi yuley95,

  Sorry to hear that you can't associate your iPhone with your Sony's Hi-Fi speaker. We'll see what can be done to get it paired.

  I would first start by taking a look at the troubleshooting below sketch. Start by making sure that your devices are close to each other, restart your iPhone and speaker ensure that your iPhone is updated to bring them to see each other.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201205

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  Let me know if it helps.

  Nice day

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)