Satellite U500: CD ROM is not working - error code 39
Just discovered cd-rom not working not on U500 PSU9MA - 00K 013, checked Device Manager and uninstalled the driver reinstalled + restarted and still does not.
Get the error code 39. CD-ROM seems to open okay and the light turns on this subject but not reading/reading cd when inserted. Drive appears in Windows Explorer either. Windows 7-32 bit (service pack 1).
Ugly calendar like any uninstalled Norton V4 to install V5 of disc and may not without cd-rom.
Hello
Had the same error as part of the ODD in the past could solve it following way:
-J' removed the ODD (remove) Device Manager
-Now to the registry delete filters upper and lower key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-Now reboot the laptop and wait windows has recogniyed the ODD in Device Manager
-Now, ODD should be visible in MY computer
This is also a useful MS doc:
http://support.Microsoft.com/kb/314060
Tags: Toshiba
Similar Questions
-
Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19
I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!
HEALED!
All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :) -
DVD player does not work error code 36 please help
I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36
Hello
In addition to the BIOS settings the player himself could have problems.
-------------
This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
Please use the computer's system setup program to reconfigure the interrupt for this device.
(Code 36)Interrupt request (IRQ) translation failed.
Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.
On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
--------------------------------
Check with Toshiba support
Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspToshiba - Forums
http://laptopforums.Toshiba.com/===========
If you have problems after checking the BIOS settings:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
System Restore does not work; error code 0 x 80070715
System Restore will not restore an error occurred in the initialization of the program if the problem persists contact your system administrator. I tried 3 times still not work error code 0 x 80070715. Help, please.
Hi margZX
See if this post by Stephen Boots helps.
-
Satellite A30 - CD-ROM does not work correctly
My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?
Looks like catch 22. Someone at - it help him?
I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.
-
Webcam on the Satellite A200-175 does not work - error code 10
Hi all
I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).
I'm a bit of idea, so any help would be appreciated!
Hello Franca
It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.
Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?
-
Satellite U200: DVD - ROM does not work correctly
DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system.
Look like lost laser precise positioning device and can no longer read high-density data on DVD, but on the sum of CD singing can be found with difficulty.
Your description sounds like a reader lens problem.
Probably the lens can not calibrate in the right position, and that's why the drive can't handle DVD media.Bad news buddy this problem is not repairable with updates. Above all it s a hardware problem and the drive should be replaced!
I would recommend contact the ASP which is responsible for you country to organise a replacement.
Good bye
-
Satellite A200 DVD-ROM does not work
I received an error code 39 for my dvd device. The device driver and software are installed ok. I do not have the technical specification, so I don't know what code eror 39 is.
Hello
The error code 39 is very similar to error code 31.
This code is known to me. I saw this question here in the forum from time to time.The solution is very easy! remove the upper and lower filter registry ;)!
I found this Microsoft Knowledge base article that provides the details and the solution:
Cannot access CD-ROM and Error Message "Code 31" in the device after Manager removed Adaptec Easy CD Creator on your computer
http://support.Microsoft.com/kb/270008/en-us/Please follow the guidelines and the report if you did!
Good bye
-
ATAPI iHAS324 what is ATA DVD ROM is not responding, error code 10
My DVD ROM(ATAPI iHAS324 Y ATA Device) no longer responds and it has an error code 10. How can I make it work again?
According to the testing of operating system following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Windows Update does not work. Microsoft Update NOT work.error code 80072EE2
Original title: Windows Update does not work. Microsoft Update DOES not work.
Automatic update does not work. When I try to manually update I get error code 80072EE2. I tried Microsoft Automated Troubleshooting Services. Whenever it reports it has repaired errors, however there is no improvement.
There may be another reason -
Most popular right now: http://support.kaspersky.com/viruses/solutions?qid=208280684
TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.
-
high definition audio does not work - error code 10
Current title: idt high definition autio does not work
My idt high definition autio does not work it gives me a code 10 how to fix
Hello
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update device drivers.
Follow the given article below for more information.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I suggest you to perform the following methods.Method 1:
You can uninstall the existing driver from Device Manager before installing the new.1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. Locate the yellow exclamation mark under portable devices, right-click on it and select Properties.
3. go tab driver and click Uninstall to uninstall the driver associated with the device.After uninstall is completed, restart your computer and check if the problem is resolved.Method 2:
I suggest you update the audio drivers on the manufacturer's Web site see the link below:
Information about the hardware devices for Windows XP drivers
http://support.Microsoft.com/kb/319908
http://support.Microsoft.com/kb/283658Method 3:
I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:
No sound in windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
See also the link below:How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/PT-BRI hope this information helps you! -
Sony VGN-AR320E laptop webcam CC4 does not work. error code 10
Hi all
I have sony VGN-AR320E laptop. Just reinstal windows vista. Webcam does not work. gives me an error code 10. I tried to reinstal driver, looked online, could not fix. In Device Manager it says "this device cannot start. (Code 10) »
I appreciated all the help,
Hello
Error code 10 is issued when the operating system knows exactly what went wrong. The result of this error is a hardware failure. Sometimes, it might be due to viruses, to which you can scan your system and take off from these infections. But the most likely reason would be some registry errors. You can use the registry scanning software to run a test on the box and they can automatically correct the error.
More information for sony vgn-ar320e laptop 10 difficulty error code:
http://supportforsony.iyogi.com/VAIO-CW-series/error-code-8.html
Hope this helps you.
-
Windows Vista upgrades not work - error code 8007065E, 80070641 and 641
Original title: windows Vista upgrade does not
I tried to run updates and constantly getting the following errors:
code 8007065E,
code 80070641, and
Code 641
but can't them solved using Microsoft?
Hello
Did you the latest changes on the computer before this problem?
Before the windows update follow the methods check if it works very well.
Method 1: Put the computer in a clean boot state before proceeding with the installation of windows update.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2: Temporarily disable the security software.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Run the Windows Update Troubleshooter.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/en-us
Method 4: Follow the steps in the section provided.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Difficulty of corruption problems MSI software update registration
http://go.Microsoft.com/?linkid=9666880
You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
It may be useful
-
Hey
Just got rid of SE 2010 from my pc and now none of the network on my pc devices work continues to come up with the error code 39 and .dll is not found I tried re-installing the drivers and still no change please help also I can't uninstall it from the device or the other.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please make all underneath the same if you've done it before as it's often the total of the process which
solves
the question.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.Normally the above will solve this problem if not work your way down through them, even if you
done before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.--------------------------------------------------------------------------------------
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
to convert applications PC Web site power on mac os.10.7
to convert documents from PC Web site power on mac os.10.7. I often need to download my site of University conferences. I had no problem to do so on mac os 10.4.11 power pc applications.now with my new computer, I often struggle to do?
-
Satellite A305D-S6835 - need some drivers for Windows 7 32 bit
I installed Windows 7 (32 bit) on my machine, everything is recognized, except the 2 devices! I don't know what could be, because in 'Device Manager' writing 'base system device '! I tried to update the Device Manager, but I haven't had much luck! If
-
WINDOWS error 126 and RICHED20.dll is FOUND and ERROR NSIS
I've recently been delete duplicate of my WINDOWS XP filesHave also recently installed auto extra ram memory; now, with a total of 1 GHave defragmented registry and hard driveUsed Norton eraser to ensure no viruses, etc...Thought everything was good
-
Window / folder size, location, & cache error display. Vista Ultimate 64
Hello I had this problem before and only way I fixed it was a reinstall, but I really don't want to go that far. Essentially of minute-to-minute my vista ultimate 64 keeps forgetting each size of the window, the place and the display mode. If I put a
-
Can XPS 410 - we have a list of all THE processors that are compatible from the Bios DXP061-020501
I know I know, this has been asked several times on the forums. The problem is that is scattered between so many threads and I'd like to see in one place a list of all CPU that work on the XPS 410 from the current version of Bios DXP061-020501 compat