Satellite U845W / U840W / U800W - screen is coded using Linux

Similar Questions

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns

  Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns and laptop computer must be restarted to restore functionality
  The center of the causes of "touchpad button" toggle switch by pressing the touchpad pointer to enter a random State like two fingers to zoom.

  Sometimes, he'll be back to normal, but most of the time the computer should be put to sleep or restarted to restore functionality.

  a. I tried turn off all touch pad feature one item at a time and all, he still has some weird random State.
  (Did not try the impossible combination need $ to be interested but went to the 90% level)

  b. I tried disable the touch pad buttons offending and only using the mode tap the buttons and the problem still persist.

  c. Finally, tried bending the entire keyboard instead of pressing the buttons and it has also created the problem.

  This leads me to believe either the power key or flexion of the entire keyboard is originally is

  a. flexion of the touch pad causing the driver getting into a crazy State or require a recalibration.

  b. electrical connections causing the driver enter a crazy State or require a recalibration of bending.

  Note: I have reinstall the latest version of the driver.
  Also: American Toshiba support site that this problem exists in the notebooks of May.

  Also: The touchpad is too sensitive, which makes it very unusable!

  CAry

  Have you tried to install the operating system and check the functionality of the touchpad with the factory settings?
  Recovery image contains tested the touchpad and right and I don't think that helps the driver installation.

• Satellite L510 shows white screen with a cursor frozen only

  {color: #000000} After turning on my Toshiba Satellite L510 the splash screen displays an image, then the pass empty with a cursor frozen in the upper left corner.
  I am currently using Windows 7, but the computer will not load in front of the start screen.

  I tried to reboot using the F8, safe mode key, but no response from the computer.
  I tried to restart using the "F2", but no response from the computer.
  I tried to reboot with F12, but no response from the computer.
  I tried to use tips from Toshiba Support page, but no response from the computer.
  I also tried Ubuntu to start loading system, but there is no response from the computer.

  Because there is some personal information on the hard drive that has not been saved, I hesitate to do a system restore in the fear of losing all my data.

  Someone had similar problems recently?
  Anyone has a good solution to retrieve my personal files and restore the computer to a good working order?
  Thank you in advance.

  Kind regards
  Beautiful {color}

  Hey Buddy,

  I think that you can't do anything more. In my opinion, you did everything write and now it s time for professional help because it seems to be a malfunction of equipment that should be checked to a service center.

  You should contact the guy and ask for help. I think that everything can be clarified with them.

  In addition, you can access data from another PC. You only need an external HARD drive enclosure that creates an external HARD drive.
  And maybe you can keep the HARD drive at home if the service center don t need.

• How to force the screen sharing to use Ethernet 2 port?

  Hello

  I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

  When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

  Is there a way to force the screen sharing to use Port Ethernet 2?

  It would be useful:

  NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v

• Satellite U920T-117 - touch screen does not work & off restarts

  Just opened my new u920t-117, my first time buying a Toshiba, 5 mins in and excitement began to turn to you to worry.

  I really hope that its makes me something simple, bad, or at worst a software problem.

  At no time the touch function works (either in tablet mode or laptop).
  In the--> system under Pen & Touch Panel it says "no net or touch entry is available for this view ' as my last computer that had no touch screen.

  This means - there is a problem with the driver, or something.

  It also appears when I click on stop down it stops down and 5 seconds later starts again.

  Hi stephen

  > I really hope that its hurts me something simple, or at worst a software issue.

  I'm afraid the worst cases are a hardware malfunction, and I guess that your contact U920T Satellite malfunctions of the screen.

  I read in another thread about the similar problem, and it seems that service engineers must be contacted in order to solve these problems of touchscreen.

  I don't know if you could ask your dealer for a replacement unit but in the case where the dealer replace the laptop, get in touch with a Toshiba ASP your country to fix.

• Satellite L750 turns on and turns off by itself using Linux

  Today, I had some strange behavior on my laptop. It closes unexpectedly, after showing a dialog box saying "your computer will stop in 60 seconds". And then when I turn it back on, it stops just before the start and it turns on by itself after a few seconds.

  It not too much heat, the CPU temperature is normally between 50 - 60 c (I constantly monitored using Conky). In addition, someone told me to upgrade the BIOS, so I did it, but the problem persists. I also tried to replace the RAM and run a memcheck, but everything looks good on the side of the memory.

  I use linux and had a look on ' / var/log/syslog ", but I'm not sure that I know exactly what to look for. Messages saved before you stop do not seem to describe something suspicious.

  I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.
  My laptop is a Toshiba Satellite L750-11w.

  Clues would be greatly appreciated.

  > I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.

  You have verified the functionality of the laptop using the Windows system, but have you used the Toshiba recovery disc and have you tested with factory settings?

  I m wondering about the message: your computer will shut down in 60 seconds

  If this would be a hardware problem, then the laptop would be closed without any warning messages.
  So I guess there must be a software problem, I guess that some triggers for setting this automatic valve downwards.
  But to be honest, I have no idea of what parameters can be

  If you think that its hardware problem, I guess only a laptop computer technician would be able to help you.

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• Satellite laptop computer with screen wide shows space black on both sides

  I have a laptop that has big screen satellite, but on the screen it is not wide but has a black space on part and on the other screen work. How can I change the settings to make it widescreen?
  I tried everything in the screen setting incl. changing resolution etc... not had the slightest idea what to do.

  Thanks :)

  Hello

  Reinstall a graphics driver of car, play with the settings like the resolution of the screen, connect external monitor (I think, it will be the same)

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Satellite A660 - 11 M WLan cannot be used after the installation of vmware 3.1.1

  I have a problem with my new laptop Satellite A660 - 11M.

  When I use some VM install VmWare Player 3.1.1 the wireless doesn't work anymore.
  When I push the button to activate the wireless, the led does not illuminate and the FN + F8 key said that the wireless is not enabled.

  I tried to uninstall VMPlayer, but the rest of the problem.
  I also tried to reinstall the Wlan driver.

  Only if I ask a recovery point before the installation of vmWare are all ok.
  You have an idea about the problem?

  Thank you

  Hello

  I know that this question. the VM (virtual machine) is NOT compatible with the Toshiba Flash Cards Support utility.
  The virtual machine affect the functionality of the FN buttons.
  Therefore, delete this system in order to use the FN keys.

• How to load Windows "On-screen keyboard" application using LabVIEW

  Hello

  If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW.

  Kind regards

  Bharath

  
  

• need help with my screen has been using mouse and the screen is smaller and smaller

  need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

  Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

• white screen when I use ' Save as '.

  Even if it worked previously, I now get a white screen when you use "save under" with the Acrobat Reader software

  Hi patriciaj8001,

  Please try the following steps: -.

  Acrobat Reader > edit > Preferences > General > under the basic tools to uncheck the option for 'Storage Show online when you save files' & 'Show of storage online with the opening of the files', then OK.

  Quit and relaunch the application.

  I would like to know if it works.

  Kind regards

  Christian

• Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

  Hello world

  I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

  It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

  Can someone give me advice? Thanks in advance

  Klaas

  Hi Klaas,

  It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

  To disable the auto restart: -.

  1. right click on 'My computer' icon and then click on "Properties".
  2. click on the "Advanced" tab
  3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
  4 uncheck 'automatically restart '.

  Please post again all the details of the blue screen error message.

  concerning