Satellite A660 - 11 M WLan cannot be used after the installation of vmware 3.1.1

Similar Questions

• Satellite P750 - 13G - media keys do not work after the installation of Win 7

  I yesterday "Toshiba P750 - 13G" for computer laptop (edition of the European Union) has purchased and installed Win7 x 64 ultimate equal right, because I was on the pre-installed too much waste.
  Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?

  And could someone tell me what I install everything in order so that I can use all the features actually?

  Thank you and sorry for my bad English...

  Hello

  > and installed Win7 x 64 ultimate equal right, because I was on the pre installed too much waste.
  Isn t easier to remove that software of the parts that you don't need and to clean the registry with CCleaner to do a full clean install?

  > Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?
  The Toshiba VAP (value added package) must be installed to get the buttons working again
  Have you tried that?

• Satellite L500 - 1-7 - WLAN cannot be activated after update Win 10

  Toshiba dear friends,

  I've updated the laptop L500 - 1 7 my girlfriend to win 10. (I know that this model is not in the update list).

  All is well, but the WLAN from WINNING 10 does not work.

  The network adapter is on and working, the WLan network also works.
  But it is not possible to activate the WLAN.

  Does anyone have the same problems and maybe a solution for me?

  Thank you very much in advance for your help.

  Best regards

  

  If Wlan module / card is recognized in Device Manager and you should be able to activate and use the WiFi.
  So I was wondering why it is not possible even if the Realtek RTL8187B wireless card appears as a recognized device...

  In any case, I recommend you connect the laptop to the internet using LAN.
  Then go to Device Manager and uninstall / remove card wireless network from the list of devices.
  After this reboot of the laptop.
  Now after restarting again, the system should look automatically new updated and in most cases, this should fix the problems of WiFi...

  In addition, you can also check page driver for Realtek RTL8187B Realtek latest driver

• Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

  After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

  Is there any special step before installing a Dual Boot with Ubuntu system?

  My laptop is a Satellite C55 - C - 1 M 0.

  Thank you. Kind regards.

  I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

• Cannot open programs after the installation of Norton

  So, my computer recently picked up a virus affecting internet Explorer. I installed a new copy of Norton Internet Security, when I realized my virus protection was rendered obsolete and the Vista firewall was not enough. The virus is now gone, unfortunately is if my ability to open ALL programs on my computer. When I try to open a program, windows asks me what program I want to use to open the program and sends me an error message. This includes verification of the admin system.

  Hello

  Your best bet may be to restore your system to a point before that you have a virus. I hope it wasn't too long.
  You will need a Vista DVD. If you do not, you can barrow one.
  Here is a nice step by step guide with pictures
  http://vistaultimate.WindowsReinstall.com/repairsystemrestore/repairsystemrestore.htm
  You lose everything was happening between now and the time before delivery, but you should go back to a point where your system works well.
  Please let us know if it works for you.

  Mark <> Microsoft Partner

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Re: Satellite P300-135: No. SPDIF in 'His' Panel after the installation of SP1

  Before this one had speakers, HDMI and SPDIF.
  Now - only speakers and HDMI.

  After all the works of S/PDIF through speakers device, but only in stereo mode.
  I need 5.1 DD!

  Could be another reason for that?

  Hello

  The SPDIF port is certainly available on this laptop.
  I remember that some devices can be hidden, if they are not enabled.

  So maybe you can do a right click in the Panel-> Sound and could mark called options hidden devices and features see the disabled.

  Then the SPDIF should reappear.

  Check it!

• Cannot disconnect normally after the installation of ArticleMarketingRobot

  My computer is running Windows XP. It's after that I think I installed a program called ArticleMarketingRobot that I was no longer able to disconnect in the usual way. I.e. when I press "Stop the computer" at the bottom left of the screen, I don't get the three icons (red, orange and green) coming in the middle of the screen.

  So my only way of extinction is by means of the on/off switch which I understand is a no no. could a good trying to tell me how to handle this? Thank you.

  Original title: disconnection normally

  Hello eddk,.

  Thanks for the return of the response.  Are you able to press Ctrl + Alt + Delete and reboot your system?  Did you run a full scan with your antivirus software and any removal of malware?  What is your antivirus software?

  If you didn't run any malware removal, please visit the link below.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

  Thank you

• After the installation of the OC windows 7 audio driver cannot be installed

  My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound

  [Moved from comments]

  Hi Dr.Kamuzora,

  There is no Windows 7 drivers for your model. You can see the following link for more details:

  http://support.Toshiba.com/support/modelHome?FREETEXT=556028

  Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.

  Refer to the procedure below:
  

  a. press Windows key + R, type devmgmt.msc, press on ENTRY.

  b. in Manager devices, go to the audio, video controller and game, expand it.

  c. right-click on its index map, click on uninstall and click Ok.

  d. restart the computer.

  If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Toshiba support:

  http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

  Hope the above information is helpful.

• Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Help, please.

  original title: MM not working,.

  Laughing out loud!

  I found the awnser!
  It was two things,
  I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.
  Then I got the thing plugged into the wrong entrance!

• Movie Maker error: cannot be used because the audio hardware is not found

  I am trying to use Movie Maker on my lap top, but get the following error: Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  I don't know what is missing, please help

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to update the audio driver installed on the computer. You can visit the link below for the procedure: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.