Satellite U940 Windows 10 update, very slow start to the top

Similar Questions

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.

• Windows / Microsoft Updates very slow

  We run a SBS2003 SP2 server 4 GB which controls DCHP etc, we get very slow downloads of Microsoft updates, it does not matter if the operating system is XP or 7, updates can take days to download.  I tried Cat 5 / wireless.  If I take a home machine updates work fine.  I changed the DNS on the server at the present time, it is using a public DNS, but it made no difference.

  Try to post in this forum of specific SBS instead: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp home does not start at the top.

  I have a desktop dell dimension 1100 with a windows xp home edition operating system. The system will not start mode 'from', I tried them all. Regardless of the mode that I use to start the system, I get a blue screen with the technical information: * Stop: 0 x 00000024 (0 x 00190203, 0x82FCB1D0, 0xc0000102, 0x00000000). I read the other posts with the same problem, but nothing works. Anyone have any ideas on how to solve this problem? Thank you.

  You should start your system in the XP Recovery Console and running chdsk/a:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Time very slow start after the restoration in car merger

  Hello

  Recently, I restored my drive of Fusion to 2 because Windows blew it all this when I tried to restore from a System Image (please see here: retrieve Windows System Image in Boot Camp 10). Basically, the HDD and SSD separated and I rebuilt the volume logic and any group. Now start up time in the OS X partition are pretty slow, so are usually use during the first minutes - sort of like Windows startup.

  My questions:

  1 should I I have recreated OS X for the SSD disk Fusion part? Or I just guess I should install it on the part of the HARD drive and the drive of the merger would 'do its magic' and, in time, to transfer files relevant starting it on its own?

  2 installing/restore OS X on the SSD portion would solve the problem?

  Thank you

  Bruncky

  I solved this with Apple Support cat in the end. Basically, you can just boot into Recovery Mode, reformat the HARD disk, and retrieve OS X directly on the SSD.

• APEX application builder very slow start + Web site

  I ' am knows a very slow start of the APEX and APEX Web sites on a Windows 2003 server and a base of XE. I see very long waits (75 sec) for the status of virtual circuits. Is there a resolution to this problem?
  
  Edited by: WebMees NL on July 8, 2009 19:33

  Hello:

  Connect to the database as the user "sys".

  select name,value from v$parameter where name ='shared_servers'; --- current setting
  
  alter system set shared_servers=5 scope = both; --- change setting to 5 
  

  CITY

• Satellite P300D - 15 c is very slow to start WMI

  Hello

  My pc (Satellite P300D - 15 c) is very slow at startup.
  When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

  After that, my pc on the screen fr jumps 'welcom' starts normally.

  So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

  Is there another type of solution, except turn the WMI service?

  Sorry for my bad English,
  If you can answer me in Dutch or English basic ;-)
  With sincere friendships.

  Johan Nijsse

  Here's the (Dutch) log of the WMI problem:

  Logboeknaam: Application
  Bron: Microsoft-Windows-WMI
  Reference: 2009-04-06 22:52:53
  Gebeurtenis-id: 10
  Taakcategorie: Geen
  Level: who cares
  Trefwoorden: Klassiek
  Gebruiker: Derby
  Computer: PC_Fam_Nijsse
  Description:
  Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
  Gebeurtenis-XML:
  
  
  
  10
  0
  2
  0
  0
  0 x 80000000000000
  
  1961
  
  
  Application
  PC_Fam_Nijsse
  
  
  
  ./root/CIMV2
  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
  0 x 80041003
  
  

  Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  It will be interesting for you.

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• my windows xp is very slow

  Please help me

  my windows xp is very slow, when startup is also very slow, that it takes 5 to 6 minutes only to windows startup. and when you open the app also very slow. I tried to clean up using reg cleaning etc. all the product (but trial ones), disk cleanup and defragmentation. I don't know what to do anymore.

  Please help me

  I suggest that you tell us more about your system and then do a few scans for malware and fix performance issues.

  It makes no sense to try to resolve a performance problem on the system without knowing anything about it or who might have an infection on this subject.

  I suggest you stop "try" things too and if you can tell us the names of the cleaner and other products that you have already tried that would be good to know (so we do not suggest that you already have).

  When we have a known starting point, then begin to fix things (don't try things).

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• New Satellite Pro U400-12y is very slow

  Just bought Satellite Pro U400-12y with Vista Business pre-installed (1 GB preinstalled memory).
  However, the startup is very slow and actually the computer seems to work in a time warp.

  Any ideas? Is there a fundamental problem?

  Yes, I have an idea.

  I think that the high amount of background processes affect the performance of laptops.
  He should know that the U400 supports many different features and these features are controlled by different applications.

  If you want you can start the msconfig and disable some unnecessary and unimportant process. Take a look in the Startup tab.

  In addition, I recommend to disable and remove the preinstalled software called Tempro.

  I did it on my system, and now it runs much faster

• HP Elitebook 8570p - Windows XP USB very slow and the transfer rate performance issues.

  Hello. I was wondering if anyone else knows some performance issues with the HP Elitebook 8570p and Windows XP Pro - SP3.

  I get a VERY slow start, general poor performance (waiting time when opening files and programs).

  I asked to burn in tests that show that everything is good.

  USB transfer rates are VERY slow (tried all ports of a Seagate FreeAgent USB drive, which works fine on other laptops etc.) for example a 30-minute transfer a 7gig single file of the USB HD on the desktop. Only 3 minutes to do the same on another laptop.

  I think there are problems with the drivers, like Windows 7 works very well and does boot from a bootable USB.

  USB transfer rate are also good when starting from a Windows boot environment.

  I installed HP SoftPaq Download Manager, and all the drivers are up to date.

  Hello:

  I think outside of the box here... Select the Intel (r) 7 Series Chipset Family SATA AHCI Controller instead.

  If it does not, I raise the white flag.

  Paul

• My Windows XP is so slow! My Windows XP is very slow. Tried cleaning and defragmentation. I'm constantly getting... "waiting for _.

  My Windows XP is so slow!

  My Windows XP is very slow. Tried cleaning and defragmentation. I'm constantly getting... «waiting for java script "... or," waiting for http://"...or"Download photo".» I'm really frustrated by the slow pace. Even when I type in the information it is still far behind on the screen. Can someone suggest some concrete measures that would solve these problems. Thank you.

  Have you checked you anti-virus software, I found mine can slow down processing system from time to time. Also check the amount of free space you have on your hard disk, because if it becomes weak which will affect things.

• Updates very slow XP - SP3 crashes and the connection to the server fails

  original title: updates very slow XP

  I have two xp computers and updated running is very, very, slow down or failed to connect to the Microsoft website. The second computer, a laptop, is a special purpose computer, so I have no installed virus. SP3 is has crashed-out (3) time up here this morning. I tried to download sp3 for a manual install and the flow has dropped up to 2.2 k, then showed it failed to connect to the server. I know it is not my internet connection because the computer runs well so far here. I'm the only one.

  Thanks for your help.

  Hello

  Scan the computer for viruses:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Reset the Internet Explorer settings:

  http://support.Microsoft.com/kb/923737

  Disable the security software and then try to download the sp3:

  http://support.Microsoft.com/kb/950717

• Windows live mail very slow to open and use?

  Windows live mail very slow to open and use.

  With the help of Vista - Bt Broadband

  Any help or advice appreciated

  Best wishes Sam

  Hello

   
  It would be better to post the same question in the Windows Live Mail portal for assistance. We have a dedicated team to help you with such questions.
  Windows Live Mail Portal: http://windowslivehelp.com/product.aspx?ProductID=15
   
  Hope the information is useful.

• I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  you have 2 options

  (1) bring it to a Sony repair center

  http://www.sonymobile.com/global-en/support/contact-us/

  or

  (2) use flashtool for downgrade

  Don't forget to mark the correct answers & useful answers