Save as and export single action?

Similar Questions

• How can we save and export single-step using the Plugin?

  Hi all

  I want to save and export a design in Adobe illustrator to a specific folder using a plugin. For example, I created a design called test, I want to save the test.ai and shape to convert jpeg (test.jpeg) in a specific folder using a plugin instead of using normal except and export operation (file-> save, file-> export). I want to make the recording and exporting operations in a single step.

  Is it possible to do using the plugin?

  Thanks in advance

  Farida gangland.

  AIDocumentSuite allows you to save the document to a particular place, if that's what you need to do. Exporting to jpg or anything else is the 'bonus' bit depends on the signs. AIRasterize.h has some features in this sense if its what you need.

• Problem saving and exporting of .idml

  I try to save a project of 20 MB in .imdl with CC InDesign, but the result is an archive of the imdl of 1 or 2 MB that does not work. (I tried "Save as" and export). Does anyone know what is the problem?

  It is expected that an IDML file will be smaller than its parent INDD file. number of bits extrinsic is ejected in the conversion process. (Things like previews of image, which will be recreated when the file is reopened with related files available).

  You say the IDML does not work; What wrong with it?

• How do the layout and export multiple images on a single sheet of paper for printing? [was: Luke H]

  I'm something of a beginner with lightroom (and a little slow with the technology), so my question may seem Basic, but can someone tell me - is it possible to use the print module, then create a page with several photos on this topic for example a model (with different pictures of different sizes on this topic) and then export this whole (with all its photos) page as a file on my computer which means that I can take this single file to the printer, where they can print for me on one sheet? (whenever I do that he sends the photos individually, not on a page, and in their basic format without any changes that I made).

  First of all, I would advise to check with the printer to see if you have understood correctly this requirement for tiff (because most of the laboratories prefer jpg).

  If you really need bring TIFF and do have access to Photoshop or similar, you can use the function Jpg printing option as described above, save the file in jpg with a value of high quality (90 or 100) then import the jpg in LR and exporting in a 8-bit tiff (as jpg is always of 8-bit nothing would be gained by exporting a 16-bit tiff file). Loss of quality would be very small and invisible.

• HP Officejet Pro: How can I scan multiple pages and save them in a single document on HP Officejet Pro 6830

  I'm trying to scan multiple pages and save them as a single document from several individual pages.  Help, please!

  Hello

  I'm linking you to a document we have on the home page of the product for this printer.  It is said that it is for Mac OS x v 10.10, but I think that it also works in Maverick.

  Scan multiple pages into one file

  Click on the + sign next to scan to a single file

  It will allow you to scan multiple photos, but on the documents.

  See if that helps.

• I want to scan a document of 4 pages and save it as a single document HP deskjet 307 a windows7

  I use HP deskjet 307 has windows 7 - I want to scan multi-page documents and save them in a single document to send and publish on a Web site

  Hello

  There are many alternatives like this

  

  You can download this free software from the following link. You can use pdf24 to edit pdf files too. :

  http://en.pdf24.org/pdf-editor.jsp

  Kind regards.

• Is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  I work in CP 9 and I'm going to try the following: the user must be able to make ALL invisible or visible to highlight boxes by clicking on the corresponding button on the first page layout. Thus, for example, if the user does not want the highlight boxes appear, click on "Hide the boxes" and boxes are hidden for the rest of the project. I managed to get to this point for help... but it is still a lot of work for me to manually enter all the different names of these boxes in the action-script. So my question is: is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  Actually... releasing the CpExtra HTML5 widget, it will be possible.

  It has a function called @syntax that allows you to perform an action (for example HIDE) automatically on any object throughout a project of Cp9 simply based on the name of the object.

  So for example, if you named all the boxes to highlight you want hidden this way to have the suffix _HideMe and you say CpExtra you want all of them hidden if a user variable is assigned to a certain value, then that is what will happen.

  That's the good news.  The bad news is that the widget is still in BETA final tests at the moment, so you may need to wait a bit before you can realize your idea.

• I have a 2 page PDF, but I want to divide pages and save each in a single document. How to do that without having to print and scan?

  I have a 2 page PDF, but I want to split pages and save each in a single document. How to do that without having to print and scan?

  Cannot be done with the player; you will need Acrobat for that.

  If you do not have Acrobat, and it is a unique work, you can use the 30 day trial of Acrobat Pro DC: https://www.acrobat.com/en_us/free-trial-download.html

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• How to export my 'action' in photoshop cc2015 to another computer (PC) with the same version of photoshop?

  Hello

  I have a prob with my pc on w10, I want to reset it and I ask how to export my 'action' in photoshop cc 2015 to my new installation of the w10

  Maybe my screening are saved in the cloud, but I do not know...

  could you please answer me before as I have format my drive C: / and I porecess to the new facility.

  Thanks

  Hi nicolasp,

  Follow the steps below to record your actions:

  • Open Photoshop and go to the window actions
  • Select an action and click on the drop down at the top right and choose Save Action > select the location to be saved
  • You will need to perform the same step for all the actions that you have

  

  If your shares are purchased, they must be registered the slot location. You should check here:

  C:\Program Files\ADOBE\Adobe Photoshop 2015\Presets\Actions CC

  Kind regards

  Claes

• I want to extract information from the same input field in multipal PDFs (created using document pro) and export them to an excel file. Is this possible? If this isn't the case, Adobe seeks to make this project a reality.

  I want to extract information from the same input field in multipal PDFs (created using document pro) and export them to an excel file. Is this possible? If this isn't the case, Adobe seeks to make this project a reality.

  -Extract all data from a single file can be done via the tools - forms - more form Options - export data...

  -Extract some data from a single file will require a script to measure.

  -Extract all the data from multiple fields in a single file can be done via the tools - forms - more form Options - merge data files into spreadsheet...

  -Extraction of data from several files will require a script Custom Action, as I've written before.

• Link multiple images and export to jpg

  Hi, this is my first post, been searching nearly 2 hours for my solution, not find with all the answers

  I have a model with a size of 500 x 500, there is the logo of my company at the bottom right and there is a logo mark on the top left, I have created a layer to put the products in the environment models.

  So now that I have nearly 400 products to reissue and export to jpg, someone can help me with this? I discovered that I have to use javascript for this and I have no idea how to do that.

  

  I would like to have 2 files, first is my product the second folder would be the export of photos to the() with the same title would be possible?).

  so that the script should be able to automatically read the first file and republish the product automatically in the layer and export to jpg and Save in the second folder. (all product images are the same size so no worries about that.)

  Million thanks!

  I would do that with photoshop.

  create an image of 500 x 500 (same as your product images)

  Place the logo etc where you want. and save this file.

  Then create an action to place this file on top of your images.

  Run this as a batch through pictures of products.

  I would look for a tutorial for batch adding of watermark to photos for a detailed step by step.

• Mix and export of separate multitrack session files

  Hello

  Is there a solution for radio producers, export of the hearing 3.0 separated files. For example, I have a few parts of the radio in a single session program - each consists of a headin', the loop, the voicetack and the HeadOut ({willing on different tracks}.) Now, I don't want to choose one by one and export - I wan't to export all in this session as mixed, separate files at one time.

  Is is it possible?

  Thanks in advance for your response.

  Bartek
  

  It is correct. I just had a very attentive to your multitrack available look, and I think I can see why you have a problem with that. I think what it is is a solution, but you have to do the last part of it to change the view.

  What you need to do is first to open the list of markers and change all your points of reference in ranges of marker (highlight in the list, and there is an icon at the bottom to allow you to do). Now, mixing integer, including markers and metadata, export and have it opens in edit mode. Now, if you open the list of markers in the edit mode, you will find that there is an additional icon at the bottom of the it - one that lets you batch files. It will take the name of marker for the file names and will save ranges mark as individual files, with other options as well. If you mix the entire file at once and split it later. To do this, you must highlight firstly all reference lines in the list.

  Who reached what you want?

• Conversion to DNG in Tif and exporting of bridge

  I focus of stacking for micro photography and the software that I use works with jpg or tif only. As I'm doing now is to import the raw files in Bridge convert to DNG as I then go to Lightroom and select all the DNG files and export to tif. Lightroom does it well, but have been until the end of the files on my hard drive is something of a crap shoot sometimes. I stand by that inside the bridge. I have used what we call the help file, but it seems to have no useful information on the subject or give me answers for almost all programs that Adobe puts. So the question is can I do this in Bridge or not? It is pretty much the only reason why I keep Lightroom autour.

  Thanks, John Passaneau

  What you want is the image processor in Bridge.  Image/Photoshop/tools open processor.  Here you can batch convert to tif or jpg format.

  You can select the folder you want to save in, and you can also perform an action at the same time.

  I hope this helps.

• Save downloads and import bookmarks do not work

  Hi, I have a few problems with firefox lately. First of all, I couldn't save my download. The map is linked to the default Downloads", but I can not change the map option is grayed out. In addition, change the 'ask where to save' option is not helped either. If I try to download something, while the "ask where to save" option is selected, nothing happens. No window pop up no error messages, nothing. I have tried everything on the mozillazine site http://kb.mozillazine.org/Unable_to_save_or_download_files, unfortunately to nothing does not. Then then I tried a complete uninstall and reinstall. This did not help my problem. In fact, it became worse I tried to import my favorites. Support on restore again did nothing. No window pop up an error message. I have tried pressing other random options as backup, import and export of html code. All these options do nothing as with the download.
  

  Can someone help me please?

  Hello

  Unless you selected the option 'Remove my Firefox personal data' during the uninstall, your profile folder has been preserved. Firefox works correctly if you use the Reset function?

  • Firefox - modules to reset and refresh settings

  If this isn't the case, then other software on your computer may prevent it working correctly. It works fine when you start Windows in Mode safe?

  • From Windows XP in safe mode. Microsoft technical support

  If Firefox works Windows safe mode, check your settings in your firewall and anti-virus. If you have rules set up for Firefox, can help to remove and re-create them manually.

  jojo0 wrote:

  The map is bound to the default Downloads", however I can't change the map as the option is greyed out.
  

  map = map (nl) (fr); card (nl) = folder (en)