Save in different place - Safari El capitan

Similar Questions

• Why windows 7 saves a file in severel different places

  I save a file in a folder, then windows 7 creates several others scattered around the hard drive files and save the file again.

  I hope that you see the "same" file in things like libraries - it's just a single file being viewed in different places.

• I have pictures in 5 different places, some, some not, how can I get to the same place

  I have pictures in 5 different places, some, some not, how can I get to the same place?

  Thanks for your help, but I'll just give up this. I'm not good on computers, can't do anything anyone advise.  / Thank you once again, Luella

  You learn how to do what all young as you are right now, or the other.  * smile *.

  It's not as if the issue is not going away.  Perhaps if you focused on ONE thing first - like find all the photos on your local computer or to save all photos to your account facebook or yahoo in a folder on your desktop - it seems so overwhelming to you.  All little by little.

  What you want to try first?

• Toggle the code in different places

  Hi all

  I use LV 2010, how to enable/disable code labview at different places in a project in one fell swoop.

  I am sire this option is available in 2013, but is this option available in 2010. Please let me know urgent.

  This allows me to use the code online and offline.

  Kind regards

  PKP

  You should take a look in the conditional structure disable...

  Norbert

• How can you tell two different cursors to move to different places?

  Sorry if this has been asked before, but I couldn't find the answer anywhere.

  As I said, I'm trying to get two different cursors to move in two different places on the same graph. I have values I want them to go, I'm not sure that work or the command to use. I'm using LabVIEW 8.6. Thanks for any help!

  WCR,

  You will need to use the property of the graph nodes to move cursors programmatically. The properties of interest are the active cursor and the cursor Position > X and the Position of the cursor > y. use the active cursor to specify (by index cursor) what slider you want to work with, and then set the X property values and, and then adjust the slider according as the active cursor and set its property values X and Y.

  

• I have 3 different places in different printers 3. HP Solution Center does not recognize all but 1.

  I have 3 different printers HP F4400, officejets 6500 E710n-z and 709n in 3 different places. HP Solution Center only recognizes F4400. How can I get my Solution Center to recognize the other 2 without reistalling all the time. Here my current printer can print on 710n-z but the printer cannot scan, says no printer detected. How do I solve this

  It's very strange. Try to create a new user account and setup the printer on this account. If this does not work, try to install the printer on another computer and see if it has the same problem. Let me know what happens.

• lost all my sounds and when I passed all the icons were in different places and everything is much broader.

  Hello

  Last weekend or there abouts I seems to have lost all my sounds and when I passed all the icons were in different places and everything is much broader.

  What has gone wrong?

  Hello

  I did (I think) and it did not work, so it looks like I'll have to call Packard Bell and see what they have to say.

  Thanks for your help anyway

  Ken

  As you have already gone to the website of the manufacturer of the computer and reinstalled the drivers is a good thought to contact Packard Bell about this.

  See you soon.

• move pictures from a memory stick in a different place, and release in addition to the memory stick. I find that the pictures (copies) are always on the memory stick

  I don't want to make copies, which I already have, I want to get out in addition to the memory stick of mnving content in a portable hard drive permanently. My photos are totally assembled in 3 different places in my windows computer (not my fault) Photo Gallery, I don't want the images there are... My collection is private.  Picasa collects all the photos again. I want the originals stored for future use in a hard drive laptop or on disks.

  I do not use the photo gallery, you just need a viewer to open the pix.

  Also, I don't know why you get 4 copies. Some libraries can be deleted if you do not use. I don't remember those that can be deleted, so you'll just to test.

  If I understand correctly: create a folder for the original user and another for the edited pix. After you have moved the pix on the flash drive, you can delete the content of this file and it is there and empty for the next round of pix.

• Remote web site may be a composite of downloads and synchronization of 2 different places?

  I want to store web files for my website in 2 different places because of my backup strategy (a HARD drive is stored on Acronis files, the other HARD disk is too big and gets the backup files).  Is it possible to have a single Dreamweaver site on the remote server that pulls and is synchronized to the top of 2 places the different (on different HARD drives)?

  Thank you.

  There are several software solutions for the management of a Web site from several locations and workers. It is to extract files and control their return in. In an environment where many people work on a site, it is necessary, but if you are looking for just a solution wherever you are the only developer, then you will find those really annoying solution.

• How to create a button with rollover that appears in a different place than the button when you move?

  Hello

  How to create a button with rollover that appears in a different place than the button when you move by using only the Muse (reversal may be a different shape and color of the button). I managed to do it using Photoshop and the separate layers and import it, but it is not a good solution. All suggestions will be welcome.

  Thank you

  You can try to use the widget of the Composition of the ToolTip. In this way, the trigger area is isolated and a "State of reversal" can be placed anywhere on the screen (compared to the trigger).

  • Remove the two triggers additional default
  • Set to display the targets on working capital
  • Select hide all initially.

• I say 6 layers of an interior of the Hall and the only difference between them is that I'm in different places on the pictures to illuminate different areas with a flash.  I thought that I could retire to each image using a layer mask but it doesn, t seem

  I say 6 layers of an interior of the Hall and the only difference between them is that I'm in different places on the pictures to illuminate different areas with a flash.  I thought that I could retire to each image using a layer mask but it doesn, t seem to work... any suggestions please

  Try this automatic method

  http://phlearn.com/automatically-remove-objects-photos-Photoshop

• Culture in two different places in the same page

  What on Earth, I want to crop in two different places in the same page. For example, I want to keep something in the upper part and something in the lower part, but skip the other parts. What happens on Earth, I can do that, gentlemen?

  There is a rectangle of cropping by page.  What the parties 'ignored' would look like? Flat white?

• Why PES 10 Organizer jumble of photos at the same date in different places?

  I have 10 PSE installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take pictures in different places at the same date and download in the organiser, rather than keep the photos in different places together depending on the place, there the words all this. It does not keep the in order of time from the first to the last for that day, it just mix everything in a random order. Why?

  Hello

  Although we got by.

  What I've noticed, is that you are in the folder view and no thumbnail.

  In the PES 10 folder, the sort order is by filename - [in PES 11 is by date and time with respect to the miniature display].

  If you are going to display-> display file names and check, displayed under thumbnails - will appear in the order?

  Normally it is numbered in the right order-, you renamed photos?

  If it was me, I create two tags, Holyrood and Britania and apply them to appropriate pictures. Then switch to thumbnail view and filter by tag.

  Brian

• Why can't save the same bookmarks in different places?

  Why can't I save a bookmark for a site in several places? If I him have already stored, for example, in the bookmarks menu, and I then try to save an extra copy to the folder of bookmarks, copy it to the bookmarks menu will disappear. It's incredibly frustrating. Thank you.

  You can make a copy of a bookmark if you want it to appear in several folders.

  • https://support.Mozilla.com/kb/how-do-i-use-bookmarks

• Cannot save the settings of safari home page

  Hi, I am unable to save the settings of my browser safari, for ex homepage. I set google as my home page, the settings are kept until my mac is turned on, once I restart or shutdown, will wipe away and some stranger from the North that i ve never defined as one opens. kindly help.

  m using macbook air 13 inch yosemite to OS X, version 10.10.5

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Some of the most common types of adware can be removed by following the instructions from Apple.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. Save all data before taking this action. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted. That's all you need to do in withdrawal may be, but you will still need to make changes to the way you use your computer to protect you from new attacks.

  If the steps above do not work for you, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.