Save methods (2) but no help with iPhoto
While I was asking a question on merging photos and iPhoto, I came downstairs to discover that iphoto had a picture inside, out of the 13 999. It was a document that I have identified as not even mine. Since then, I have tried several times to restore IPhoto al the whole folder "photos" with time machine, that will only repair the photo one alone (the document). I continue to go further and further back in time, in the hope of a restoration that took a few photos. I'm now trying Crash Plan for a restoration, but that one doesn't look good either. Currently the time machine is something that took much longer than before and I'm keeping my fingers crossed. My photo library is not complete, so I will lose about 1000 photos if something does not work here. I have a stunned and felt as if I had it covered with 2 separate backup plans, one on the site and the other off. I currently feel like the only method is to burn the DVD (a hundred I guess) and store them every house of the mydaughters, the current technology is not quite what it seems. Any ideas would be appreciated.
Since then, I have tried several times to restore IPhoto al the whole folder "photos" with time machine, that will only repair the photo one alone (the document)
You need to restore from Time Machine is an iPhoto library. Are you being an iPhoto library in one of the versions of the images folder that you restored?
Tags: Mac OS & System Software
Similar Questions
-
New to Mac - need help with iphoto
Just bought a Mac in may, which has the OS X El Capitan. Try to use all the advantages of iPhoto (hope I have that correct name). I want to be able to organize and edit photos for most. Came from PC world and I'm certainly still appearing on my Mac. I've had an iPhone for years, so I understand a little of him, but still confused. Here are my questions:
1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..
2. If I want to be able to save them in iCloud, how can I check my settings to make sure that I have do this correctly? I would like to be able to access it on all my devices if possible (iPhone, Mac, iPad)
3. If I remove them in one place, this means that they are deleted in the world? (May be a stupid question, but then again, I'm still learning.)
Any help is appreciated. Thank you very much
EGerdes
As I showed you before, www.icloud said it's nothing for me to remove it. A person who is not honest. In addition, there is the fact that my address book has been consumed.
El Capitan comes with pictures for Mac application. iPhoto was provided with older Macs.
1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..
Photos for Mac everything automatically organizes in Moments, the Collections, the years.
- Times are including pictures taken at the same time in the same place.
- Collections are grouping related moments
- And the years view shows all photos taken in the same year.
You can add the selection of photo albums and creating an album from them.
And you can group pricing albums by moving them to the folder. Folders can be nested.
See this help page: Help the Photos
i.e. https://help.apple.com/photos/mac/1.0/?lang=en#/phtf677b8f5
-
Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.
Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.
I was wondering if I saved a layer somewhere and set it as a default value.
If you group the layers, you will be left with a single layer, thus spreading your concern.
Suggest that you do the following:
- Make sure you have the latest drivers for your printers
- Reset the default preferences.
Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.
Items nearby and let regenerate the file.
-
How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!
The Web site may use autocomplete = off to prevent Firefox to record the name and the password.
You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.
- Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/
-
Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!
Hello
Try resetting the default associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.htmlIf necessary:
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.html====================================
Also follow these steps:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------
Then, if necessary:
Have you recently installed another player?
Reset your associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html---------------------------------------------
Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
--------------------------------------------------------------
Have you recently added stores or ANY application from Stardock?
Using 64-bit Vista?
Can you think of recent things you did in WMP which could be the cause? You added another
reader recently or an add-on for WMP?When I try to use Windows Media Player 11, the program does not start, or some UI elements
are empty - a Mr Fixit
http://support.Microsoft.com/kb/925704/en-usMaybe something here
http://msmvps.com/blogs/chrisl/articles/17315.aspx
and here
http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspxCheck here the news of WMP11
http://zachd.com/PSS/PSS.htmlI hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Help with error: "display driver stopped responding, but recovered."
Hello
First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.
AMD Phenom II X 6 cpu.
My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:
Display driver stopped responding, but recovered
Driver AMD display driver stopped responding and has successfully recovered.
This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.
I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.
Thank you very much!
I found a solution that helps!
Please make a backup of the registry before making any changes in it.
When editing the registry go to:
- HKEY_LOCAL_MACHINE
- then the MATERIAL
- then DEVICEMAP
- then the VIDEO
- in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
- This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
- Double-click MaxObjectNumber, and an edit box appears
- put 0 in the given value, and then click OK.
This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me. The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.
If anyone knows how to save the changes to the registry, I would be very grateful for your advice.
-
Need help with sizing and save files in batches
Hi need help with a project.
I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.
Then I need to save it to the web as a PNG with a transparent background.
Could I do a script for? or is there another way to do it in batches?
I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.
Any help some suggestions would be greatly appreciated.
ID do as a series of actions photoshop if the end result is png,
pro image processor can help you make automatically, if you must resize batch additional... >
https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/
I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording
Open a file, change the size of the image to 350 x 350
Change the canvas size,
then save under...
-
How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?
This is kind of a hack, but it will work.
1. you will need to download a copy of the Capriola on your computer and install it as a system font. Google Fonts will allow you to install it as a system font in some methods (download a.) (ZIP file, synchronization with SkyFonts or downloadable on the project in Google Code). Edit: the simplest is to add the font to your collection of fonts in Google and then download one. ZIP file of your font collection.
2. the font squirrel website has a generator of quality web fonts. It may take a font installed on your computer system and generate all the files of web fonts needed him. Place the web font files in the folder of your Muse project where you want to store the web fonts self-hosted. Use the add web fonts in Muse and select the tab fonts self-hosted.
IMPORTANT: Please read the license terms for any font that you want to use on your website. Fonts Open source as Capriola may seem safe to use at first, but the developer of fonts may have some requirements, such as the display of a link to their web site somewhere in your own site. Other fonts may have monthly limit on number of pages seen.
-
I have created a book with iphoto and that you have inserted a card. I can't add the cities that I visited when I option
Can someone help me
Thank you
What card theme you are using? And what version of iPhoto? Your internet connection is working?
In iPhoto 9.6.1, you can add a location in layout mode. Zoom in on the map and ctrl - click the location on the map, and then select 'Add Place '.
In mode 'Options', you should be able to press the button "+" and type a name for the place. The location search pictures by name. You can also ctrl - click on the map and add the location manually.
What happens when you try to add a place? You get an error message?
-
Dear all
I need help with the following problem:
Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.
Appreaciate help on this problem.
MSD
I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:
Using Photoshop | Photoshop help
To bookmark so that you can find.
-
With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10. I just installed a temporary version of PSE v14 and would really like to use to see want I can do.
You open iPhoto or organizer? If the latter; Check your configuration. During your installation, make sure you select the application, and not an alias (shortcut). Go to this link.
-
Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?
It does not ask the cloud your computer admin password password!
-
Illustrator draw android app says that it requires 4.3. I have a viking RCA pro 10.1 which is 5.0, but it says that my device is not compatible. Can anyone help with this?
HI JBlessed,
What is a Tablet? Because the draw is not yet supported on Android tablets.
Sue.
-
PMT_000008 error, when I'm trying to change the method of payment. Help, please! Cookies are cleaned, tried different browsers. It does not help.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015
You can just copy/paste the enchilada itself on another page, pretty easy!
If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .
Maybe you are looking for
-
Activation of DLNA Scan with Tivos admin page expires
I wanted to go and reset my ReadyNAS long running and stable to pass the time to backup my files of Tivo 02:00 to 15:00, I would be put in place for centuries on an old version of firmware. With 6.4.2 I rebooted and went, adjusted at the time, record
-
Error during the processing of purchase DF-BPA-09
I get this error message everytime I try to download from Google, but... I saw on a Google site how to solve this problem, it is said... -Tap on settings.-Selection of applications.-Select the option all.-Click on Google service framework.-Tap clear
-
DirectX 3D acceleration not available
Hello! So, I built a computer in 2012. This worked well at the time, but I have recently moved house and have had the computer implementation in the study for a while and only put in place the other day. I started and activated windows, I installed D
-
Hi allI have the following requirement to make like a command prompt:Value of the contract: contract value threshold to include in the output (in increments of 50 000, as well as the user can watch Top Agmts exceeding 50 k, 100 k, 150 k, 200 k, 250 k
-
Photoshop CS6 opens not correct file size
I use Photoshop CS6 on an iMac el capitan. When I try to open an existing document (JPG or PSD any type) it opens using 100%, but it is smaller than the actual size of the file. When I click on the size of the image, he says it's the right size, but