Save now don't read do not HP DVD Writer 1140r as recordable legacy

Similar Questions

• DVD drive don't read do not install DVD, burn CD work

  So I guess it's a hardware problem with my DVD player. As mentioned in the title, it will not read the installation discs but burned CD is good.

  -J' I tried to reboot the computer, it does not solve

  -J' reinstalled the drivers for the DVD, do not solve

  -Started the DVD in BIOS, didn't solve it

  I have a M17x r3 laptop, Win 7 64, the DVD is HL-DT-ST DVDRWBD CA30N

  Hi Pascalywood,

  Test your drive using the Dell diagnostics. I describe the procedure in my guide for troubleshooting linked below. Make sure you put a DVD disc into the drive during the reading test.

• HP 2000-2B09WM DVD drive don't read do not; a Windows 8

  HP 2000-2B09WM DVD drive don't read do not. I have Windows 8 OS. Have you tried the MS CD/DVD it Fix troubleshooter and I am given the following: media in the CD/DVD drive is not readable (hp DVD A DS8A8SH SATA CdRom Device)... Not fixed.

  So, how can it be resolved? Thank you.

  Hello @jsilvester2006 ,

  Welcome to the HP Forums!

  I understand that your CD/DVD drive on your laptop does not work.

  Can you please answer the following questions:

  You have recently installed software or Windows updates?

  When did you start in this topic?

  Have you tried several DVD?

  Make sure you have the latest version of the installed CyberLink PowerDVD software. Without this software, the DVD drive cannot read DVD or Blu - ray discs. You can download this software here: the CyberLink PowerDVD software.

  You can also try to do a restore system before the issue started if it a question recently of news. You can access the restoration through the HP Recovery Manager by tapping the F11 key, while the portable lights.

  I would like to know if it works for you.

• DVD RW drive (e :)) don't read do not all disks)

  I have a Dell Studio Windows Vista. The DVD RW drive (e :)) does not.) Regardless of the type of disc that I put in, my DVD player does not recognize. When I go to 'My Computer' to open the disc manually, a message appears telling me to insert a disc, even if it is already inside. In addition, when this message appears, it ejects the disc I have here. I did everything. My computer is up to date. I went to the only Device Manager update my CD/DVD drive and it is already up to date. I don't know what to do from here.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly. Since it accepts no disc do not forget to remove ALL the power and control the
  cable connections - remove and replace (at both ends where possible).

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer printer don't read do not

  Hello everyone, I recently updated my computer to an epson (who installed/worked very well) to a HP printer photosmart c4210 all-in-one. The problem I have started the installation of the printer.

  I followed all the steps of the manual GET to step 11 where it tells me to insert the disk, I. I then follow the instructions and get to the point where the installation program tells me to "Connect the usb from the printer to the computer cord." The problem is that when I do that, my computer is the tone indicating that I just inserted a device memory, however, the 'next' in order to get to the next step button lights and become clickable (therefore leading me to believe that the program does not read the printer.)

  I made sure the printer was until I inserted the USB cable. After trying to reconnect it several times I clicked on the box beside the message saying "Check this box if you are unable to connect your printer now, Hp will install the drivers and you'll be able to connect again later." After you have clicked on the box the 'next' button lights up and I was able to complete the installation.

  After doing this and I try to print, I found that I was unable to locate the printer on my computer. I'm on vista and had to delete some files from registry using regedit.exe to play the disc.

  Someone had a similar problem to this? I have custom installation do not install all the B.S. that usually comes with the programs of these days... I was very careful to keep all the useful things that the printer should run so I don't see how this could be a problem. The only thing I do not installed is "customer" or something to that effect which States it links now and then while you are online but "is not slow process too" and gives "improved support"...

  I worked on it for hours and I am very tired, it's kindof my last ditch effort before going to bed. Tomorrow, I'll check to see if anyone has a solution for this or a miracle any which would be nice . If this isn't the case, I guess I'll try to reinstall and include all the software of B.S. that comes with the installation disc to see if it works.

  Any help on this would be greatly appreciated, thank you.

  Hey, thanks for the reply. After turning off my computer for the night and taking the disc from the drive. I turned on my computer, plugged the usb to my printer and then turned on the printer cord. A message came that vista was "installing device drivers." After that I was prompted to insert the installation again disc I did. It seemed to install more than a few things... But it works fine now. It's funny that it worked because I restarted several times, however, I'm glad he did it and am very happy with this printer up to now that I got that it works, and highely recommend HP anyone, he launched my ass Epsons, thanks again.  I will catcha later.

• Windows Vista don't read do not SanDisk 2 GB sd card

  I have a vista edition windows Home premium, service Pack2. My problem is that I have a 2 GB sandisk micro sd with adapter card. When I tried to use it, a moment ago, it did not work. but I, somehow fixed. I don't remember what I did, but it worked. and now, it's the first time I am using the card in a moment and the computer does not read it. I searched online for some time and could not solve the problem. I hesitate to do a system restore or anything of the sort, because it is my grandparents computer. Finally, I came to the conclusion that the sd port can be broken, but I tried another card and it worked perfectly. The other card was also a sandisk 2GB, but this is a regular, not a microphone. I went into Device Manager and all drivers are working. I also made sure the sd card is not locked.  I don't know what to do anymore. Help, please.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the steps below.

  (a) click on Start

  (b) in the start search box, type devmgmt.msc , and then on enter.

  (c) Please check if you can you view the device in Device Manager.

  (d) If you do, right-click on your device and select set to update driver.  If there is an update, restart the computer and insert the SD card, and then test the question.

  If there is no update, remove the SD card. Restart your computer, then insert the SD card.  In some cases, the computer will automatically search for drivers.

• ID CS4 URLs don't read do not direct in PDF format read by Acrobat 6

  Dear all,

  Of course, I would like to find a nice list of what can make and not different versions of Acrobat and Reader.

  I sent a PDF (version Acrobat 6 (PDF 1.5)) in InDesign CS4 (see config system. below) and my seniors were struggling with it. We had Acrobat 6 and could not read URLs and yet the Interactive Elements worked. I made sure that I specified the ' export Include - hyperlinks and Interactive Elements when I made the PDF. What should do? So, I found the site called OldApps.com and downloaded Acrobat Reader 6.0 for Windows. Of course, the URL did not, but the fact that interactive. Going on the idea that having to insert manually a hyperlink in InDesign seemed to have worked and let ID/Acrobat to create the links does not work, I made all the links manually in code. It worked and now all links are live.

  If I had some kind of list that I would look at what was not and what has been taken in charge in earlier versions of Acrobat/PDF and I could then make adjustments to my INDDs and PDFs as a result. Such a beast exist? What should I create one?

  System:

  Windows XP Home SP 2

  Creative Suite 4

  CPU Pentium 4 3 GHz

  1.74 GB OF RAM

  We prefer in format Acrobat (7 and 8 where I at least) that detects URLS in the text. It's probably what's happening. If you have this checked pref, you get links in the pdf file that you are viewing and if others don't have this checked pref, then they do not see the links.

  Hope this helps,

  Janine

• Satellite A215-S7437 hard drive don't read do not

  Whenever I put a CD in my CD drive, I heard the "rurr" that usually accompanies the normal sound of the hard drive working group work.

  But lately, it makes this noise, but does not read the CD at all either. I searched the download and support already - suggestions?

  I tried searching the base drivers / default on the driver download page, but they don't have em = / and restore the disc definitely out of the question since "broken" car

  Hmmm. Entendez_ you the ODD (CD/DVD drive) is not able to read disks from different manufacturers; CD (+ R R + RW - RW) or DVD (+ R R, + RW - RW)?

  If Yes, then the CD/DVD drive failure would be possible!
  If this is the case, then you will need to replace the CD/DVD drive

  If your warranty is valid, I recommend you contact the ASP in your country to help others

• Seeing the drive DVD Satellite M50 does not turn OFF, CD/DVD drive don't read do not

  Hello

  I have a Satellite M50 - mx5 with a carpet * a DVD player. When I insert the CD or DVD, the player starts, turns the CD autour (the indicator light flashes)... but a few seconds later, the drive stops turning, but the DVD drive light is on.

  Windows also think that the DVD drive is empty.
  I also tried to boot Windows from the CD when the computer starts upward, but without success either.

  Ideas for what is wrong? Is my DVD drive broken?

  Thank you
  Eli

  Hello

  Sorry to said but in my opinion, drive is dead and that the replacement allows the reader features can save.

  But be aware that not every drive is supported and can be used with the laptop!
  Take a look in the user manual. Sometimes the compatible players are listed.
  And it s useful to know that all parts can be ordered from the ASP in your country.

  have a nice weekend ;)

• Pavilion dv4: CD/DVD drive recognized but don't read do not

  My DVD RW drive has suddenly stopped reading my CD.  It is recognized, the software is updated, and in the Device Manager, it indicates that the drive works properly, but is obviously not. The Cd has been used the week before with no problems (it contains the files of articles and reviews) but since then has not worked and I never even pulled out of the car so I don't think it's anything wrong with the CD itself.  I recently inserted a music CD and it worked fine.  When I insert the other CD that seems not read at all and funny noises come from the drive and sometimes the compueter will be the way I want to use the player. either as a CD or USB drive.

  The CD works on other computers?

• Input analog don't read do not correctly in normal mode

  Hello

  I try to perform a simple test using Keithley KUSB-3102 like interface that sends a Dout of + 5v and the bed on the Ain. External circuit consist of a mosfet as a switch that puts the + 12v power to a relay and yes I am new to LabVIEW environment.

  The VI is attached. When I run this VI Hightlight graph mode & LED works very well, showing all the values and the circuit works fine as well. But when I move it in normal mode the circuit still works fine, but the values are not shown on the graph or the LED lights only once.

  Now what I believe is that he needs a timeout before the next loop, but I can't do this I tried other VI provided by Keithley as trigger and delay but it gives an error that I do not understand why and hv tried the normal delay of more but not luck. Maybe miss me something uncertain.

  Kind regards

  I was linking the wrong way, I connected the delay outside/inside of the loop that is having very little effect on it. But wait until the next ms Multiple function has been the right to use inside the loop. I now take a full cycle by 400ms to read of the Ain and shows 4.8V - 4.7V which is fine.

  Thank you.

• NEED HELP WITH DVD DRIVE DON'T READ DO NOT DRIVE

  DVD player does not try to install a software, but it does not even recognize that a disk has been placed in the pilot. Think that I removed it by accident.

  Hello

  1 does happen with all disks?

  2. you get any error message?

  3. What is the brand and model of the CD\DVD driver?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• Windows 7 don't read is not GPT data readers

  Heyo,

  So I have a secondary data drive and an external hard drive, the two NTFS formatted with TPG. My primary fails HD and I replace, reinstall windows, etc. However, now this computer (and only on this computer; other Windows 7 machines very well) reads the secondary data disk to format RAW instead of NTFS and sees only the unused portion of the external data drive. I installed an update of windows designed for big HDs, update bios and drivers from the chipset.

  I really appreciate all the help you can provide.

  See you soon

  Hello

  You might face this problem when there is a conflict with the drive letter of the device you are trying to connect to your computer. But before that I suggest you to take the backup of the data that you have in this computer and then try to change the drive letter. You can follow the steps below for data.

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows/back-up-files#1TC=Windows-7

  Once you have managed to take the backup of the data, you can follow the steps below to change the drive letters and then check if it helps you.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  If you still experience this issue you can also try to change the type of partition on the drive, but do not forget to bring it back to the top of your data by following the steps in the link provided earlier.

  Convert a hard disk or partition to NTFS format

  http://Windows.Microsoft.com/en-us/Windows/convert-hard-disk-partition-NTFS-format#1TC=Windows-7

  Let us know the status of the issue.

• BlackBerry Storm 9500 Smartphone - phone don't read do not my SIM after having replaced the screen (vodafone PAYG).

  I recently replaced the screen on my Storm 9500, ensuring that the screen I bought was an exact match, paying special attention to the color of the flex cable and all the serial numbers. After turning on at the end of the replacement of the phone work as usual, all the menus and functions are in perfect working condition. The only problem I have is the phone is not reading the sim card there is now a message at the top of the screen that reads "insert sim card". The upper right corner of the screen indicates "SOS". I tried to give the SIM to a clean place and also tried another card sim vodafone with the same result. I thought that maybe the new screen needs to be reconfigured or something. Anyone have any ideas?

  Thank you very much

  Gary...

  Hello

  Tried the biggest pieces of paper and it worked a treat, thank you very much for your advice, it was very appreciated!

  Thank you very much

  Gary