Pavilion dv4: CD/DVD drive recognized but don't read do not

Similar Questions

• IPhone 6 battery but don't read do not zero percent

  My iPhone 6 is underway to due to the battery is exhausted, but the percentage of battery remaining display is not zero - usually in the range of 30 to 40%.

  I backed up and restored like new with iOS 9.2, but this did not improve the problem.  Is this a hardware problem, which needs a trip to an Apple store - or is there a software solution?

  If this was not the first time that the phone turns off at 30%, did you leave it up to 100% load without interrupting the charging process?

  If so and it is not chance the situation, get the battery checked by visiting an Apple store or Apple authorized service next to your site provider.

  This discussion could also be interesting: How to calibrate a battery iPhone?

• HP 2000-2B09WM DVD drive don't read do not; a Windows 8

  HP 2000-2B09WM DVD drive don't read do not. I have Windows 8 OS. Have you tried the MS CD/DVD it Fix troubleshooter and I am given the following: media in the CD/DVD drive is not readable (hp DVD A DS8A8SH SATA CdRom Device)... Not fixed.

  So, how can it be resolved? Thank you.

  Hello @jsilvester2006 ,

  Welcome to the HP Forums!

  I understand that your CD/DVD drive on your laptop does not work.

  Can you please answer the following questions:

  You have recently installed software or Windows updates?

  When did you start in this topic?

  Have you tried several DVD?

  Make sure you have the latest version of the installed CyberLink PowerDVD software. Without this software, the DVD drive cannot read DVD or Blu - ray discs. You can download this software here: the CyberLink PowerDVD software.

  You can also try to do a restore system before the issue started if it a question recently of news. You can access the restoration through the HP Recovery Manager by tapping the F11 key, while the portable lights.

  I would like to know if it works for you.

• DEVICE SAMSUNG EXTERNAL HARD DRIVE INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  DEVICE HDD EXTERNAL 2.5 "HDD SATA SAMSUNG INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• The CD/DVD drive malfunction: one missing, the other does not work

  My HP Pavilion dv6000 laptop running Vista, came with a CD/DVD drive that appeared as a reader of CD (e) and (f) HD DVD player, with the hard drive and windows repair partition C: and D:.  There, the E: drive seemed to have disappeared, and it is the reader who would access it when I put a CD to read from.  The HD player never worked to this end and of course now that I only have the "F:" drive, and it tells me to insert a disc, despite the fact that there is a disc in there.  And I have no idea of what I did.

  I right click on the HD drive properties and go to the Hardware tab.  WDC (Buncha numbers) ATA device is listed as type of hard drives, and UTIHAX (even numbers) SCSI CdRom Device is listed as a DVD/CD-ROM drives drive (Yes, with the ').  Both work properly, according to the properties of the device.

  I tried to disable and re-enable the it.  I tried to uninstall and allow the pilot to resettle.  Nothing doin ' sofar, so I was wondering if any of you have any other ideas I could try.

  I'd love to hear them!  Let me know what you need.

  Hello

  Even if the conditions are slightly different the same cause may be at stake.

  Do not forget to check with HP, their documentation online support and drivers and the HP
  Forums for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Device HDD external Samsung install properly but don't S poster not in the workstation

  DEVICE SAMSUNG EXTERNAL HARD DRIVE INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please select your language from the drop-down list above pour post your question in the language of your choice. The forum you have a posted in EST for English only. If you can't find the desired above language, en charge options pour Additional international locations can be found later in the link below:

  http://support.Microsoft.com/common/international.aspx

  Your question about Samsung HDD external refers to material. Please repost in the Vista Hardware forum:

  http://answers.Microsoft.com/fr-FR/Windows/Forum/windows_vista-hardware?page=1&tab=all

  Mersi.

• After installing Vista, CD/DVD drive cannot be seen or read.

  After installing Vista, CD/DVD drive cannot be seen or read.

  Hi heartmanmd,

  You get the error message?

   

  Run the fixit available in the article below and check if that makes a difference

  
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• Pavilion dv4 recovery DVD is not recognized at startup

  I made a set of 4 HP recovery assistant recovery DVDs when my PC was brand new, and now I want to fix the system (after the failure of the CMF to repair files). However, I get an error of 0xc0000255 at startup (everything has been already verified as OK). Any ideas?

  Found!. As there is no option to select the device to boot to the POST and the option "Fix the system" after F8 does not by default on the CD/DVD drive, it must be done in the BIOS (F10 at startup). So I chose DVD under the 1st boot device.

• NEED HELP WITH DVD DRIVE DON'T READ DO NOT DRIVE

  DVD player does not try to install a software, but it does not even recognize that a disk has been placed in the pilot. Think that I removed it by accident.

  Hello

  1 does happen with all disks?

  2. you get any error message?

  3. What is the brand and model of the CD\DVD driver?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• My CD/DVD drive stopped working... it is not recognized on my computer... I can't open the compartment either by ejection or manually

  I have a laptop HP... I rarely use the DVD player... someone suggested the BIOS to default and disable the VRAM... Who has sense and how I would do? I tried Microsoft Fixit, but it does not work... I uninstalled the PCI controller. er in the management of devices and Rebooted, without success. It's as if my drive just disappeared.

  Thanks for any help in advance

  Hello

  To manually open the drive:

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =========================================================

  For the reader does not:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• DVD RW drive (e :)) don't read do not all disks)

  I have a Dell Studio Windows Vista. The DVD RW drive (e :)) does not.) Regardless of the type of disc that I put in, my DVD player does not recognize. When I go to 'My Computer' to open the disc manually, a message appears telling me to insert a disc, even if it is already inside. In addition, when this message appears, it ejects the disc I have here. I did everything. My computer is up to date. I went to the only Device Manager update my CD/DVD drive and it is already up to date. I don't know what to do from here.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly. Since it accepts no disc do not forget to remove ALL the power and control the
  cable connections - remove and replace (at both ends where possible).

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Seeing the drive DVD Satellite M50 does not turn OFF, CD/DVD drive don't read do not

  Hello

  I have a Satellite M50 - mx5 with a carpet * a DVD player. When I insert the CD or DVD, the player starts, turns the CD autour (the indicator light flashes)... but a few seconds later, the drive stops turning, but the DVD drive light is on.

  Windows also think that the DVD drive is empty.
  I also tried to boot Windows from the CD when the computer starts upward, but without success either.

  Ideas for what is wrong? Is my DVD drive broken?

  Thank you
  Eli

  Hello

  Sorry to said but in my opinion, drive is dead and that the replacement allows the reader features can save.

  But be aware that not every drive is supported and can be used with the laptop!
  Take a look in the user manual. Sometimes the compatible players are listed.
  And it s useful to know that all parts can be ordered from the ASP in your country.

  have a nice weekend ;)

• HP Pavillion P6687: DVD drive don't read do not

  Hi all

  Recently I have problems with my DVD drive. It will not read the DVD when they are inserted and when I try to see through Windows Explorer, I am asked to insert a disc.

  The drawer opens and closes and I hear work but it does not recognize the discs.

  I believe that the optics are good, because it works very well and will autostart and play a cd when inserted.

  Any help would be appreciated.

  Thank you

  It's strange but here is the link

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems/en-us

  If the drive is faulty, DVD players are inexpensive, at least in the USA.  They can purchsed for less than US $25