Save output plugin pre-grant

Similar Questions

• Is it possible to save the installation & pre scan?

  Hello

  I am new to Thinapp & need to know that, is it possible to save save pre scan & installation post scan & build in a day later?

  Thank you!

  Hello

  You can probably create a virtual machine after a pre scan and installation, snapshot if you use Workstation or ESX (do not close the window of process configuration Capture ThinApp). And then you can go back to the snapshot and you'll get the Setup Capture window open to job analysis and build.

  Thank you

  -Pankaj

• How do I cancel a picture window after "save under" plugin format

  After finishing writing the plugin format sequence, I need to force it to reread the file or read the file and determining the image in the window.

  recorded image may be different from the source. How can I do?

  I really appreciate any advice.

  See you soon.

  Ditto for GIFS and others (you get preview however option). I think that is the general modus operandi of Photoshop - like they key features of the file, such as layers, channels, etc. color mode can be kept by the destination format, you can "save under" the file but your document in memory will not be a real nice of your file on the disk until explicitly closed and re - open. I'm not sure that break this paradigm just for your specific format would be worth the effort.

• Skillbuilders Save on exit and form Plugin tabular popup LOVs in IE

  Hello
  
  I currently use the Skillbuilders Save on exit for a tabular presentation plugin and have a problem that only happens in Internet Explorer (tried 8 and 9) - it does not occur in Chrome or Firefox. I created the dynamic Action for the plugin to execute when the Page is loaded according to instructions.
  
  My present tabular presentation of the fields that are popup LOVs. If in IE, I change the value of a field in the form of tables and then click on the LOV Save output warning goes off and I have to click OK on warning before my LOV popup window appears. For existing records I have overcome this problem by changing the switch to disable the warning :
  

  :button, .lov a

  The question I have now is when I add a new line to the tabular form using the button "Add a line" standard. If I change the value of a field on the new line, and then click the LOV I get the Save on the output warning message. I suppose that it is not deleted in the same way that it was for existing records, because the new line does not exist at the time wherever the dynamic Action then ran the lov (link) has not been added to the disabled items.
  
  I would like to know the following, please? :
  * Is there a known difference in behavior a popup LOV in IE form (which seems to act as if you leave the page) compared to say Firefox?
  * Is it possible to add the link LOV popup on the new line of tabular form it also disables the warning?
  
  I have created an example of my question here:
  
  https://Apex.Oracle.com/pls/Apex/f?p=KK_SB_TF_SAVE_ON_EXIT
  
  Concerning
  
  Karl

  Hi Karl,

  The difference is that IE (wrongly) raises the onbeforeunload event whenever you click an anchor point, even if the anchor does not take the user to another page - as is the case with the Popup LOV.

  Unfortunately, the plug-in must ensure that its code is executed before any other thing which is the reason why he's working onload. The only thing I can think is that you manually add the same functionality yourself using the public methods. For example, when a new row is added through the form of tables, you must add a click handler to anchor LOV. The call, click on:

  $(document).apex_save_before_exit('disableWarning');
  

  Then use setTimeout to solve the warning after a short period of time:

  setTimeout(function(){$(document).apex_save_before_exit('enableWarning');}, 250);
  

  Let me know how it works for you.

  Kind regards
  Dan

  blog: http://DanielMcghan.us/
  work: http://SkillBuilders.com/APEX/
  Twitter: https://twitter.com/dmcghan

• I have firefox 13 and 15 but realplayer download this video option does not work, extensions to save plugin is disabled, if no videos do not play in youtube

  I have Firefox 13 and real player 15, but the download this video option does not work, under extensions to save browser plugin is disabled, but if active videos do not play in youtube, error occurs, it's major drawback, it works well with IE, but I prefer Firefox so any help to rectify the issue is appreciated.

  One possibility is to upgrade to Flash 11.2 and re - activate the Plugin RealPlayer browser Record extension in the Add-ons Manager (Tools > Modules > Extensions) (it's a softblock).

  If you need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

  You must uninstall version 11.3 Flash.

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• the container plugin crashes if the computer enters in standby mode or screen saver mode

  It seems every time I put my computer in "sleep" or mode if it passes mode screen saver container plugin crashes

  Update, it seems that if I leave a video or an open game so I have to leave or turn it into safe mode it blocks it

• Photoshop CS4 Settings "save for Web".

  I have two questions - my logic/explanation can be a little hard to follow, so please check screenshots:

  1. when 'save for web', in the "presets" menu drop-down menu, I created a couple of presets and saved in the default folder name

  [C:\Documents and Settings\Shandy Elliott\Application Data\Adobe\Adobe Photoshop CS4\Optimized Settings]

  and I deleted those I want to use - never.

  

  I even navigate in Explorer in the above path and make sure that no default presets are located in this folder (with Photoshop not running). Photoshop allows re-charging the defaults when I re - open Photoshop or whenever I have "save for web". Is there another place/file in Explorer, I need to delete the default presets, or is only a function of Photoshop to again fill the predefined default settings (which I think is boring if yes)?

  ___________________________________________________________

  2. When you save a .jpg file, there are two ways (at least in my case)-

  a. FILE/SAVE AS / .jpg (then set jpeg options)

  b. "save for web".

  I want to do is be able to use 'save for web', create a specific preset for quality absolute maximum .jpg (JPEG - 100 in the screenshot - that simulate the same result as if I performed step 2 and used "quality 12 for jpeg options" [relatively]) and for Photoshop to DO NOT put dashes between words. I know that I can uncheck the Unix box in 'Compatibility file name' in change output parameters, but which seems to affect all presets and not just a simple "Preset". I guess it's just a global setting not be changed - sometimes I wish software has been a bit more customizable.

  

  The reason why I want to be able to do that (in addition to the savings in step 2) in some cases, I would benefit from the extra allows parameters 'save for web' [to know be able to save a .jpg .psd in several different size simply by changing these settings].

  

  I'm doing this instead of initially saving a .psd as an 800 x 800 .jpg, then open this 800 x 800 .jpg, resize like, say, 600 x 600, and then save again - which I am basically destruction subsequent .jpg because I re - compress an already compressed image. Record directly from of a .psd and have the ability to resize just the result, for me, seem to be my best option.

  To conclude:

  1. How can I keep specific 'save for web' presets while eliminating the predefined default settings?

  2. How can I set a specific "save for web" pre-programmed to not put dashes between words while allowing dashes for all the other presets?

  Thoughts?

  First rename presets in "C:\Documents and Settings\Shandy Elliott\Application Data\Adobe\Adobe Photoshop CS4\Optimized Settings" of *.irs to * .ir$ or something like that. " Then same procedure in "C:\Program Files\Adobe\Adobe Photoshop CS4\Presets\Optimized Settings"

  This will hide the unwanted presets.

  You can try to remove too - I quite like rename that in order to remove.

  :-) miss_marple

• HP service plugin - nexus 7

  Hi all

  I had a nexus 7 (android 4.4.2) with hp service plugin pre-installed. I had a wifi hp officejet 6700 printer connected via wifi.

  I had a word (.doc) document in QuickOffice. I click the button print in QuickOffice and he has shown the Sub screen (link below), except that all the elements (copies, paper size) and the 'Print' button is grayed out that does not allow me to change or clicked.

  http://www.androidcentral.com/sites/androidcentral.com/files/styles/w680h550/public/postimages/684/p...

  Anyone know what I need to do? Do I need to download the software 'HP e-print "? (I thought in 4.4.2 Android, hp itself service module should be enough to run wifi printing.

  Thank you very much in advance,

  Kelvin

  The application of HP printing service. Return to the Google game store and reinstallHP app Printing Service again. It should work.

  If it isn't, the HP ePrint app can be the only option that is currently available, which will work with your device.

  I use the print application all-in-one for my HP Slate Pro 8 product loan.

• More questions about registration of the plugin on a Production Server package

  I tried to review other messages (as well as the documentation for VMware) regarding the plugins installation/registration on [the customer] production servers.  Specifically, I was looking at this recent announcement:

  https://communities.VMware.com/message/2292717

  The following response was a very good point, but I was looking for a little more in detail about how other developers are doing this installation/registration:

  laurentsd: as a plugin developer, you are responsible to write an installer that customers will run to register your plugin package. You do not want to treat to run a java program directly :-)  The installation program should be easy to use.

  I was curious to know how many people have their customers to install a Web Client plugin.

  The States of doc SDK - Tutorial.html in the 'record of your plugin...» "article for the mode of production (step 1), you can:"

  Use a script program or installer to create the object of Extension data programmatically and enter this data object using the ExtensionManager.registerExtension method

  This means that the .zip file must be placed on a server access with HTTPS access.

  [Variant 1]: are most of the people having the client stores the .zip file in a HTTPS server in the customer environment?  If Yes, then I guess that the installer prompts the user to specify the URL to the zip file, which is then rolled into the Extension data' things "programmatically.

  [Variant 2]: or, most people hold their own on their own server HTTPS .zip file by using an installation program with hard coded URL value in the .zip file, and having the user simply launch the installer without entering any additional data?

  Or maybe there is an Option of [3] that I have not yet thought?

  It seems that [option2] is obviously easier for the customer, but makes it harder to make a plugin that everyone has access to.  [Variant 1] requires a bit of work for the customer, but allows the developer to restrict access to the plugin for customers who have paid for the product.  Certainly the installer can block based on the license key, but anyone with some knowledge of vSphere Client Web plugins as well as documentation 'Save your plugin package' could take a plugin .zip file and install it manually without an official Installer (when the .zip is hosted to the public).

  You must take the URL of the ZIP file as an input for your script so that all options can be supported. If the zip file is hosted in the customer environment, then the URL should point to that. If you host the zip file on your own server, then the URL should point to your server.

  You should code hard not URL that you have mentioned in the #2 option, because there are several companies and agencies Government which do not allow to connect outside of their network.

• Failed to navigate to the plugin registration page after the deployment of vApp

  Hello, we use Serengeti.8 a bit and today found and want to talk a look at the new package of silly data Extensions.  After I deploy the EGGS, starts the administration server and I can access (ssh/console) very well, but when I hit the web service to save the plugin, I get and error of SSL protocol.

  The URL (examples), I am struck by the documentation are https://ServerName.domain:8080 / plugin    or https://10.20.30.40:8080 / plugin I see in the list of processes that Pier/Java manages port 8080, and when I type the same URL without https, I see an apache/tomcat 404 page?

  Not sure exactly where to go next for troubleshooting plugin registration.

  Hello

  If you want to access the plugin registration page, you must Access the http://: 8080/register-plugin /. There is no SSL on port 8080.
  

  If you need to download the plugin binary package, you must Access the https:///vcplugin/serengeti - plugin.zip.
  

• Reverse engineering of output of a query

  The query below is able to track changes i two paintings by detecting changes by row-by-row titles. I woul want to rewrite the query to resemble the desired output.
  
  Select
  HOUSE_KEY,
  LOW,
  HIGH,
  Count (src1) TBL_CURRENT, count (src2) TBL_STAGE
  Of
  (select a.*,
  1 src1
  TO_NUMBER (null) src2
  of TBL_CURRENT one
  Union of all the
  Select b.*,
  TO_NUMBER (null) src1,
  2 src2
  of TBL_STAGE b
  )
  Group
  HOUSE_KEY,
  LOW,
  HIGH
  having count (src1) <>count (src2);
  
  Output current
  < pre >
  HOUSE_KEY DOWN TBL_CURRENT TOP TBL_STAGE
  1346553 23945076 97886375 0 1
  1346569 06388286 7888258 0 1
  1346569 06388286 78882515 1-0
  1346553 23945077 97886368 1-0
  < / pre >
  
  Desired output
  How can I make the query to look at are the columns like this by extracting the column name and separating the value by a comma in one column?
  < pre >
  
  HOUSE_KEY Column_chg Value_prev Value_new Chg_column_count
  1346553 low, HIGH 23945076, 97886375 945077,97886368 2
  1346569 HIGH 7888258 78882515 1
  < / pre >
  
  Published by: CrackerJack on February 26, 2013 03:38

  with data (HOUSE_KEY,LOW,HIGH,TBL_CURRENT,TBL_STAGE) as (
  select 1346553,23945076,97886375,0,1 from dual union all
  select 1346569,06388286,7888258,0,1 from dual union all
  select 1346569,06388286,78882515,1,0 from dual union all
  select 1346553,23945077,97886368,1,0 from dual
  )
  
  select
   house_key
  ,trim(both ',' from column_chg) column_chg
  ,trim(both ',' from value_prv) value_prv
  ,trim(both ',' from value_new) value_new
  ,decode(instr(trim(both ',' from column_chg),','),0,1,2) Chg_column_count
  from (
  select
   house_key
  ,case when
   lead(low) over (partition by house_key order by tbl_current)
   != low
   then 'low,'
   end
   ||
   case when
   lead(high) over (partition by house_key order by tbl_current)
   != high
   then 'HIGH'
   end column_chg
  ,case when
   lead(low) over (partition by house_key order by tbl_current)
   != low
   then low||','
   end
   ||
   case when
   lead(high) over (partition by house_key order by tbl_current)
   != high
   then HIGH
   end value_prv
  ,case when
   lead(low) over (partition by house_key order by tbl_current)
   != low
   then lead(low) over (partition by house_key order by tbl_current)||','
   end
   ||
   case when
   lead(high) over (partition by house_key order by tbl_current)
   != high
   then lead(high) over (partition by house_key order by tbl_current)
   end value_new
  from
  data
  )
  where column_chg is not null
  
  HOUSE_KEY     COLUMN_CHG     VALUE_PRV     VALUE_NEW     CHG_COLUMN_COUNT
  1346553     low,HIGH     23945076,97886375     23945077,97886368     2
  1346569     HIGH     7888258     78882515     1
  

• What is the Gpg.plugin

  I save my Plugins folder and came across the Gpg.plugin and I was wondering how you call in the effects and preset component and what is it used for.

  CS5.5

  GPG = Gain / base/Gamma

  Lightning lightning =

  Lightning2 = advanced lightning

  Levels = levels

  Provinces2 = levels (the individual channels)

  Mylenium

• Trigger event handler problem

  Hello
  I am facing a problem in the event handler, I'm pre process handler.bellow event is the steps that I followed and did all the steps correctly, but the event handler is not triggered.
  
  the steps that I follow is
  (1) develop a java class in which I will put middle name if the user does not have a middle name in the form of IOM in the CREATE operation.
  
  import java.io.Serializable;
  import java.util.HashMap;
  
  import com.thortech.util.logging.Logger;
  Import oracle.iam.platform.context.ContextAware;
  Import oracle.iam.platform.kernel.spi.PreProcessHandler;
  Import oracle.iam.platform.kernel.vo.AbstractGenericOrchestration;
  Import oracle.iam.platform.kernel.vo.BulkEventResult;
  Import oracle.iam.platform.kernel.vo.BulkOrchestration;
  Import oracle.iam.platform.kernel.vo.EventResult;
  Import oracle.iam.platform.kernel.vo.Orchestration;
  
  * / public class NamePreProcessEventHandlers implements PreProcessHandler {*}
  
  private logger = Logger.getLogger Logger ("logger name Handel");
  
  private String methodName ="";
  public NamePreProcessEventHandlers()
  *{*
  debug ("invoking NamePreProcessEventHandlers");
  *}*
  *@Override*
  public cancel Boolean (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  Returns false;
  *}*
  
  *@Override*
  public void offset (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  * / / Write your implementation.*
  * Public EventResult run (long processId, long eventId, orchestration of the Orchestration) {*}
  * / / TODO self-generated stub method *.
  
  
  this.methodName = "execute";
  * / / This method get the parameters of the request of IOM form *.
  HashMap parameters = orchestration.getParameters ();
  
  debug ("settings" + settings);
  String operation = orchestration.getOperation ();
  debug ("operation process pre" + operation);
  
  If (operation! = null & & operation.equalsIgnoreCase ("create"))
  *{*
  String firstName = getParamaterValue (settings, "First name")
  If (firstName! = null & &! firstName.trim () .isEmpty ())
  *{*
  If (! parameters.containsKey ("Middle Name"))
  *{*
  orchestration.addParameter ("Name", firstName.substring (0,1));
  *}*
  *}*
  
  *}*
  return new EventResult();
  *}*
  
  *@Override*
  * Public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration) {*}
  * / / TODO self-generated stub method *.
  Returns a null value.
  *}*
  
  *@Override*
  * public Sub initialize (HashMap arg0) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  */***
  The value of request parameters obtaining *.
  **/*
  private String getParamaterValue (parameters HashMap,
  * String key) {*}
  String value = (parameters.get (key) instanceof ContextAware)
  *? (String) ((ContextAware) parameters.get (key)) .getObjectValue () *.
  *: (String) parameters.get (key); *
  Returns the value;
  *}*
  
  private void debug (String message)
  *{*
  Logger.Debug (this.) GetClass(). "GetName() +": "+ methodName +": "+ message);
  *}*
  *}*
  
  (2) create a jar named NamePreProcessEventHandlers.jar file and paste it into the LIB directory.
  
  (3) develpo a config to custom handler file as follows
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  
  (4) create a plugin.xml file
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  (5) make an Eventhandler of the zip file in which I placed the plugin.xml and lNamePreProcessEventHandlers.jar
  (6) save the plugin file to the server of the IOM
  (7) import of the event custom in the MDS.
  (8) clear the cache and restart the server of the IOM.
  
  (9) then create user page in free service, but the event handler is not triggered.
  
  Please help as I am with IOM 11gr2.was I miss some steps or above process is sufficient.
  
  Thank you and regars
  $

  All looks good, but your plugin.xml is not correct.

  Go to the format below and try again.

  
  
  
  
  
  

• The Custom Format recording

  Hi all

  I'm looking how to save a document in a custom format.

  When registering a .tga I use:

  PSapp.ActiveDocument.SaveAs (output, tgaSaveOptions, psExtensionType.psLowercase, false);

  What I want is to save in a customized format that is not in the list of available SaveOptions.

  The format I want to save is a specific .tga: NW4C_TGA (file owner format) there several options specific to the economy of this format.

  When I save a file by hand in the display save as Photoshop dialog box, it displays the custom list format and I can select and configure the options.

  It's because I put the NW4C_Tga.8bi file in the directory of Plug-ins for photoshop.

  How can I access these custom by the script format?

  Thank you very much for your attention.

  Jeff

  You must install the plugin scriptlistner and see if it creates a code when you save in this format.

• Why Firefox denies my request for websocket server upgrade? (It works using Chrome)

  I have a simple web page that I use to test my server websocket manipulation.

  < meta charset = "utf-8" / >
  < title > WebSocket Test < /title >
  < script language = "javascript" type = "text/javascript" >

   var wsUri = "ws://192.168.1.18/";
   var output;
  

   function init()
   {
     output = document.getElementById("output");
     testWebSocket();
   }
  

   function testWebSocket()
   {
     websocket = new WebSocket(wsUri);
     websocket.onopen = function(evt) { onOpen(evt) };
     websocket.onclose = function(evt) { onClose(evt) };
     websocket.onmessage = function(evt) { onMessage(evt) };
     websocket.onerror = function(evt) { onError(evt) };
   }
  

   function onOpen(evt)
   {
     writeToScreen("CONNECTED");
     doSend("WebSocket rocks");
   }
  

   function onClose(evt)
   {
     writeToScreen("DISCONNECTED");
   }
  

   function onMessage(evt)
   {
     writeToScreen('RESPONSE: ' + evt.data+'');
     websocket.close();
   }
  

   function onError(evt)
   {
     writeToScreen('ERROR: ' + evt.data);
   }
  

   function doSend(message)
   {
     writeToScreen("SENT: " + message);
     websocket.send(message);
   }
  

   function writeToScreen(message)
   {
     var pre = document.createElement("p");
     pre.style.wordWrap = "break-word";
     pre.innerHTML = message;
     output.appendChild(pre);
   }
   window.addEventListener("load", init, false);
  

  < /script >

  WebSocket test

  I use a TI CC3200 to run the Web server code.

  It turns out TI implementation expects to find the upgrade header followed by the key in the query. This is the reason why he was working for the chrome.

  FireFox has the key before the upgrade header. TI code was not the key and just using a string NULL for her. So the answer accept had something to reasonable search, but didn't.

  It would have been nice if firefox didn't would be out something on the data of accept being wrong.

  In any case, TI is aware of the issue.