Save the model

Similar Questions

• Totally confused about error message when you save the model.

  I am a total novice - teach myself that I'm going through all the tutorials.  I built my index page off the Dreamweaver to build your first Web site tutorial.  I posted a question about a model from this page, and he responded by sending me a link to "The Missing Manual". I followed the instructions to make the template and editable regions and I get the error the talks from trying to save an editable region within block-level elements, but I do not understand how to fix it.

  Areas I'm trying to make editable are my navigation bar on the left that has been created in a table as the tutorial said using the block function in CSS styles.  As I used it, not make the editable region? My navigation is locked or I'll be able to change the navigation from one page to the other buttons?  I have read so many things I've confused myself.

  The excerpt that gives a good description of how repair if you have not used the field block to the style of the page, but I'm confused about what to do as I did?

  Help!

  Kellysingleton wrote:

  I am a total novice - teach myself that I'm going through all the tutorials.  I built my index page off the Dreamweaver to build your first Web site tutorial.  I posted a question about a model from this page, and he responded by sending me a link to "The Missing Manual". I followed the instructions to make the template and editable regions and I get the error the talks from trying to save an editable region within block-level elements, but I do not understand how to fix it.

  Areas I'm trying to make editable are my navigation bar on the left that has been created in a table as the tutorial said using the block function in CSS styles.  As I used it, not make the editable region? My navigation is locked or I'll be able to change the navigation from one page to the other buttons?  I have read so many things I've confused myself.

  The excerpt that gives a good description of how repair if you have not used the field block to the style of the page, but I'm confused about what to do as I did?

  Help!

  First off you need to create a model of 'master' NOT an index page. The index page is created from the "master" template

  Explained simply: build a page as you like in Dreamweaver, and save it as a template for the folder root of your site. File > save as template

  Then you can create pages of your site from the "master" template File > new > template > choose Site folder > select model > create

  You now have a new page, based on the model of 'master '. Save it with the name index.html in the folder of your site.

  Your 'master' model has no editable now region then open it in Dreamweaver. Insert your cursor in the table cell where is your left navigation and then select themark along the bottom of the Dreamweaver window. Choose now your navigation overall is in the table cell to make you an ' editable '.

  Go > insert > template objects > editable region. Name LeftNavigation, and then click ok. You will see that your navigation has now been wrapped in an editable region. Save the model of 'master' and the changes will be reflected in the index.html page, which was created from the "master" template

• FAQ (30): SDM can save the model named directories?

  I like to keep SoftPaqs separated by the name of the model.
  
  In the Options of Configuration/Tools, there is a way to download SoftPaqs and separate them by SoftPaq names. Is it possible to separate them by a model/product name?

  

  No, but you can download and save SoftPaqs for download different directories (directories may have another name, including model names) by making use of SDM in mode 'All products' and 'building Driver Pack"SDM.

  To do this, select the template that you want, then go to Tools/Configuration Options and change the name of the download directory for the model name/number. When you set up the configuration if you wish, save by selecting file/save or file/save product Configuration under. We recommend saving all your SDM configurations in the same folder for easy selection.

  When you are ready to load a configuration, simply select file/load Configuration of the product.

  For more information on the SDM Configurations, please see using the application.

• Save the model Instance

  [Transferred to LAVA]

  Available in cross-post code

  Hello

  I have VITs who call the other VITs or CSTT in some of my models.

  I want to open a reference to a template and save the new screw/CTL the disk programmatically but I get errors

  My code works fine for the screws or the VITs only call the other screws or CTL.

  However if the VI or LIVES contains calls to other VITs or CSTT then it fails.

  When I try to get a reference to the new VI or CTL in memory the reference seems dead?

  Can someone point me in the right direction?

  See you soon

  JG

  Cross post solution

• Save the model in Oracle Applications

  Once, I fell on the code to save a model of XML in applications. I'm not able to see that now. Can someone please?
  
  Thank you, Tyler

  Try this:

  DECLARE
  errbuf varchar2 (100);
  RETCODE number;
  lv_conc_prog VARCHAR2 (30);
  lv_template_code VARCHAR2 (30);
  lv_template_name VARCHAR2 (100);
  ln_business_group_id NUMBER;
  BEGIN
  errbuf: = 'NO ERRORS ';
  RETCODE: = 0;
  / * REGISTER BI PUBLISHER MODELS WITH PAYROLL * /.
  /* -------------------------------------------- */
  / * FIRST PARAMETER: PLEASE ENTER THE NAME OF DATA DEFINITION * /.
  / * STATEMENT: writer to check (XML) ENTER "PAYARCHCHQW", tips for filing (XML) "PYUSDEPADVXML" * /.
  / * SECOND PARAMETER: PLEASE ENTER THE CODE OF THE TEMPLATE * /.
  / * STATEMENT: THIS MUST MATCH THE MODEL CODE YOU PROVIDED THROUGH "BI PUBLISHER ADMINISTRATOR RESPONSIBILITY" * /.
  / * THIRD PARAMETER: PLEASE ENTER MODEL NAME * /.
  / * STATEMENT: THIS MUST MATCH THE NAME OF TEMPLATE PROVIDED THROUGH "BI PUBLISHER ADMINISTRATOR RESPONSIBILITY" * /.
  / * FOURTH PARAMETER: PLEASE ENTER THE ID OF GROUP OF COMPANIES * /.
  / * STATEMENT: THIS SHOULD BE THE GROUP ID TO WHICH YOU WANT TO RUN CONCURRENT PROGRAMS * /.
  lv_conc_prog: = SHORT NAME, for example: "PAYARCHCHQW";
  lv_template_code: = Code of the model of the XML editor administrator, for example: "PAYARCHCHQW";
  lv_template_name: = 'Custom Check Writer (XML)'; / * This is what appears in the list of values to check Style/deposit advice StyleParameters window check author and notice of filing * /.
  ln_business_group_id: = '999';
  () PAY_US_CUSTOM_TEMPLATE.insert_data
  errbuf,
  RETCODE,
  lv_conc_prog,
  lv_template_code,
  lv_template_name,
  ln_business_group_id);
  / * MODEL BI PUBLISHER REGISTERED WITH PAYROLL. THANK PIECE.*.
  COMMIT;
  END;

• Problem with the evolution of the links when you save the model.

  What I have:
  Establishment of model in the "Templates" folder in the root of the site. In this model, there is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  
  When you create the new file based on the current model links the first kind to "pic/tran.jpg" transformations and second - "file:///Y|/home/3dsfera/pic/tran.jpg".
  
  What I have to do? How to preserve the original links in file created on the basis of the model.

  If the links are correct in the model, based on where the model is
  located, so they'll be correct in the pages of the child, anywhere
  within the site save you. DW will manage these links for you.

  If you see the absolute link 'file' persist after the registration of the child.
  It may be because of one of these.

  1 DW think that you linked to a page outside the local root
  folder, or
  2 DW think you have saved this page outside of the local root folder

  Did you one of the people?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "firefoxer_d" wrote in message
  News:g5vj0s$EBJ$1@forums. Macromedia.com...
  > What I have:
  > Creation of model in the "Templates" folder in the root of the site. In this model
  > There is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  >
  > When you create the new file based on the current model links of the first kind
  > changes in 'pic/tran.jpg' and second-
  > 'file:///Y|/home/3dsfera/pic/tran.jpg '.
  >
  > What I have to do? How to keep the original links in file created on the basis
  > of
  > model.
  >

• Dreamweaver 8.  Update of the model does not appear in other pages

  I created a template for my Web site. All pages in the Web site is used. Sometimes when I change the model and save, it queries on save the template and update the pages using the template. Sometimes he asks only to save the model. I just had to model and want the changes to be made in the related pages, but I can't ask him if I want to update the pages. What I am doing wrong? Also is there a way to force all pages that use a model to be rerfreshed from the model? (Changes in the model, I had attended a non editable section). Thank you

  That would certainly do. I would add that, as the means of 8? No - this is the case
  unlikely, I don't think I would! 8)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "annpmul" wrote in message
  News:ea33q5$Go7$1@forums. Macromedia.com...
  > I found my problem. I was not using the correct model dwt file.

• Prompts to save the sequential model; Unwanted.

  When you save one of my TestStand applications, I am invited to Save the SequentialModel.seq.  I have never recorded changes in the model of the sequence and do not want.

  What I must do to this application so that it uses the intact sequence not quick save the changes to the sequential model AND model?

  (1st post on a forum)

  Hello

  Since you have never saved the sequential model my guess is that the test sequence you meet could create this problem.

  Try this:

  Open TestStand and open a new sequence (do not open your test sequence). Save.Do, you always get invited him to record the sequential model?

  If any problem then perhaps with the test sequence.

  If Yes, then simply fix TestStand.

  Normally this occurs so that the version of types (common to your test sequence and types of OR) is incremented in your test sequence.

  When you load your test in TestStand sequence it automatically detects that the types present in the sequential model is a lower version and prompts to save it. Its a feature, not a problem.

  You can use this tool to resolve the differences of type:

  https://decibel.NI.com/content/docs/doc-39163

  Convert your test sequence to be compatible with the sequential model and this should solve the problem.

  I hope this helps.

  Ravi

• I downloaded a template that I need to fill out multiple times for different customers.  How to duplicate the model and save it in Adobe?

  Help

  Hi elir36398870,

  Forming this model is in? If it's a PDF file, then I suggest to make multiple copies before filling for various clients.

  Or whenever you want to save the PDF file, use Save as instead of save option to make a copy of the file.

  Thank you

  Abhishek

• Where can I save the startup for InDesign CC 2014 model?

  I want to customize the blank startup page when I create a new document in InDesign CC 2014. I create the page the way I would like it to start again, but then got lost about where to save this model. I looked under request, presets, but nothing there seems to be a place where would be a model. Can you help me with this?

  TIA,

  Ken

  I perhaps misunderstood what you mean.

  If you need to have a particular configuration, including the page size, margins, the column guides, in the face of power pages, you can configure a document preset.

  You can configure in the new Document dialog box the way you like, then click on the save the preset icon (it looks like a hard drive, next to the menu Document preset), name the preset and save it.

  To use a document preset, press Command-N and select the preset, or choose file > Document presets > [preset name] to open the predefined document.

• Adobe trial Muse crashes whenever I have save the changes in a model purchased (Brooklyn)

  Hi, I'm to assess Muse. I bought a Muse Online template file to adjust in order to build my own site. If the Muse can do that, then I'll go ahead and buy it.

  However, every time I save all changes to the file of Muse and Muse crashes immediately and consistently. Now I'm not sure if I should go ahead and buy the app of the Muse.

  The thoughts and suggestions are welcome. My apologies if I have made mistakes of a newbie here, I'm really a novice with Muse. Grateful for your advice.

  Kind regards

  Erik

  

  I guess that the "Brooklyn" model came with a .muse file and a folder of images (and perhaps other files)?

  In the components Panel I wait here one (or more) assets (image files) appears with a triangle to the left of the name. If you click on the triangle, a list of the ways, this asset is used in the site is listed. We are looking for a situation where an image is listed as both being used as 'Background' and with an entry that has a name of page next to him. Once you find a such image file in the components Panel, you'll want to find this file on the disk between the files that were provided with the model. Create a copy of this file in the Finder (Mac) or an Explorer of files (Windows). Now go to that file in the Panel active and right + click on each entry that has a name of page next to it and choose go to use assets to access the page where the image is used. Finally, not having anything selected on this page check the image to fill the browser (by clicking on the words "Adequacy of browser" in the Control Strip) to set the fill of the copy of the original image browser.

  It depends on how the model was entirely wished if you just need to do it once for a filling of browser on a master page, or if you are going to need to do that for a large number of pages.

• Change, detach the model could not allow a normal page save.

  After the early use of a template page, it came back to haunt me.

  I decided from the outset that the site has a few pages, do not use a template, then followed the following instructions:

  1. open the document based on a template that you want to detach.

  2. Select Edit > templates > detach the model.

  Library deleted, template updated and thought everything was fine. But, I now have page, on any change and save, come back as a model. I have watched every line of code and the research tools used and can find no template code.

  I know that this can potentially cause problems on the road and I'm looking for other solution (than to start over completely.) All pages validate and work on multiple platforms.

  Test site at: http://www.actionappliance.us

  Thank you...

  Sounds to me like there is a model that is nested within another model at some point in this process.   Basically, the index became damaged.

  I would like to make a new page.

  Nancy O.

• Save the server model

  I made a model that returns to a banner and a flash video on the server. When I save the template on my hard drive, nor the banner or video appears on the model.  When I try to save the template on the server, I get the warning screen,"Dreamweaver stores the templates in the root of a site directory and there is no defined site."  I then go to manage sites, and then click Directory he on the server where the files html and nothing happens.  Pls advise

  1. you need to work within a local site defined in Dreamweaver use the DW models

  2. a model DW has no function on the server.  It only works in DW and only to change your local files, which must then be uploaded to the server.

  It's how you work?  Sound doesn't like it...

• Then save the changes to a model change the divs can be changed on existing pages?

  I made changes in a model that has at least 100 child pages.  When I apply the modified model to these pages to change any of the sections editable child pages?  I guess this isn't, but I need to know for sure.  If I had to review all pages of the child after the upgrade, it would be a total disaster.  When I do revisions on the model it would be better if I deleted all the information in the sections editable in the model so that they would not affect the child pages or would it be empty what is now in the editable child pages parts.  I can't find any info in my market after manual or on the adobe help on this section.  Waiting for your advice.

  Olde Worlde Lace says:

  I made changes in a model that has at least 100 child pages.  When I apply the modified model to these pages to change any of the sections editable child pages?  I guess this isn't, but I need to know for sure.

  The model should not change any content in a "editable region" page of the child. (I'll always do a backup copy of your site folder copy before making any changes just in case something goes wrong)

  Olde Worlde Lace says:

  When I do revisions on the model it would be better if I deleted all the information in the sections editable in the model so that they would not affect the child pages or would it be empty what is now in the editable child pages parts.  I can't find any info in my market after manual or on the adobe help on this section.  Waiting for your advice.

  The contents of the editable on your child pages regions should not change because they are not in areas that are "locked" in the main model.

  I would like to as I said make a copy of your record of site before you disturb updated anything.

  With 100 + pages he sounds like the workflow could be better managed using SSI (SSI). You need to download 100 pages after you make the changes to the model to discover you have missed a change and then I have to re-download the entire batch.

• Model of savings: it does not save the configurations of margin

  I am trying to save a document as a template, to save my master page and styles. But when I save it it does not save the configurations of margin. The document a. 875 "margins left and right, but when I save the document as a template, it saves the margins left and right 1". I have adjustments to market. Do not know what to do...

  That's ok. That's how we learn better - try something and see why it does not work.