Saving images is failing as a JPEG instead of JPG

Similar Questions

• Lines on images when exporting Indesign to JPEG

  I get lines on the images when you export a jpeg file to indesign (with links to illustrator who have incorporated pictures into feathers). Help, please

  The simple solution: do not use EPS. Use HAVE with PDF compatibility. No vector fonts, nest them.

  Von meinem iPhone gesendet

  Am 24.07.2014 um 10:05 wrote Kelly Deane [email protected]>:

  Lines on images when exporting Indesign to JPEG

  created by Kelly Deane in InDesign - discover complete discussion

  Hey Willi,

  Sorry I'm new to this. Here are the answers to your questions and I hope you can give some tips.

  1 OSX 10.9.2

  2 indesign CC2014 (I just started to use during the last two weeks)

  3 illustrator CS3 (files that have been given to me, have been created to CS6), I made a few changes to fonts that in CS3 before I had CC bought, but I tried one of the files transferred directly into CC instead of CS3 back and he still has the same problem.

  4. the file I linked IS an eps, I always do an eps because with all my files I leave the fonts in the file have and save a second file, the eps where I saw all the fonts to save all of the possible problems of fonts. But you think that I shouldn't do this?

  5. you can see the lines in Indesign only when high-quality screen, they do not seem to remain in the same position, but at 100% and 200%, they are quite noticeable while 600% zoom, they become less bright. These are dotted lines, they appear differently in each different photograph. I'm not export in PDF, a jpeg file because its for on a Web site. If the lines are perceptible in the jpeg format. I just tried a pdf and they are also in the pdf file. We did not think that what was happening only to images, but in a single file where there is a shadow on the text, he did boxing odd sam-lines around the text.

  6.I exports the JPEG from Indesign CC

  7. I open the jpeg in Photoshop.

  8. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656214/ScreenShot2014-07-24at5.46.13pm.png https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656215/450-188/Screen5.46.40pm.png pulled2014-07-24

  9 seem to stay the same size. You don't see them at all in illustrator eps files.

  10. I can't talk about it. How would know that? Where is that located setting? Thank you

  11. I don't know how to look for color mode - modes are that indesign CC is in CMYK mode. Illustrator CMYK. But when I export as a jpeg I change into RGB in the export process. How can I find the color space? I'm not very technical minded. I'm sorry. That's why I freak out when I get questions like this. I thank very you much for trying to help me.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the https://forums.adobe.com/message/6578871#6578871

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page:

  To unsubscribe from this thread, please visit the message page to. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in InDesign, by e-mail or at the Adobe Community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• the system image create fails with the error e/s

  error message says to run CHKDSK/r on source/target volumes.  CHKDSK found no errors.  create system image still fails with the error e/s.

  NOTE: I've been running this process for several years without problem.  This problem is placed right after the application of all the new updates/patches to the system.

  Found a solution that works...

  format receiver volume, take him and start the system.

  recharge the receiver volume, then create startup system image.

  It worked until the end without I/O error message.

• Image verification failed

  I have created a new online form, and when you have finished filling out, I get an error:

  ERROR: An error has occurred. The image verification failed. If you believe it is incorrect, please contact your system administrator or go back and re - submit the form.

  
  

  I can't understand what the problem is.
  

  You set up the form first to use the captcha BC V2, and then you changed it to the google captcha. I can tell because the javascript, but you will see your form validation is not all shooting and you get a script error on submit.

  Reinsert your because I think that is your best option because you have modified the script etc so it does not work properly now.

• Change the size of the text in a saved image

  I am currently using Photoshop CC 2015 and I was wondering can I go back to the saved image and open in CC and change the size of text without having to redo the whole image again.

  Pixilated means that the text layer is converted just a pixel layer. Normally there are layers of vector/text, which can be edited. This is the file that you are using is a png, then there is only one layer and there is no layer to separate the text to change. You will need to edit the text and do it again.

• latest updates installed and lost my saved images

  I've updated the latest version of items and now my saved images are missing.

  Your image files are not in the elements, they are where you put them on your disk.

  Install a new version or update does not alter the image files.

  So, what's your problem? Do you use the Organizer catalogs? You are able to find your photos from the Explorer/Finder on your computer?

• Image sequence of import of JPEGs on first Pro CC 2014 out of sync!

  Since I left CS6 to CC, 2014, sequences of images in the form of jpeg files not properly are more important in synchronized first.  I use Blender 3d rendered scenes of export in JPEG format, then convert them to h.264 mpeg4 video clips in first.  What is happening is that images download tab of project to create in the mess, even if they are correctly classified in my hard drive.  Improper naming conventions are probably apart since their file extensions are _000 types, and I have never had a problem importing sequences in CS6 anyway.  Still life image default is set to 1 in the General preferences.  No one knows what offer?  Thank you.

  I would like to import as a sequence of images.

  Hit import, select the first image and check the sequence of images below, click OK.

  With the images already imported, click the sort button, and then select name.

  Sort (up and down arrow) button next to zoom.

• From Aperture to Lightroom - my images in Aperture adjusted are imported as smal jpg files in a folder in Lightroom

  I've been using Aperture for many years. My photos are raw files and I adjusted the slot Aperture.

  When I moved from Aperture to Lightroom the adjusted images when moved to a separate folder as jpg files (the size is pretty smal comepared to raw)

  My question: do I have to set all my images once more to get a large enough file to print or are the some kind og shortened?

  Hi kari b lk,

  Could you please confirm the workflow how to transfer your images from Aperture to Lightroom?

  Have you export images in Aperture, and then import them into Lightroom or you haven't imported the plugin integrated in Lightroom?

  See this FAQ if you have transferred via the plugin: https://helpx.adobe.com/lightroom/kb/aperture-import-plug-in-lightroom-faq.html

  Kind regards

  Claes

• Cropped saving images as JPEG NOT PSD files

  I am a photographer of Motorsport and treat hundreds of JPEG files at the end of the day. I used to be able to load a batch of images in CS6, levels of contrast and brightness, crop, and then either save pictures one at a time with ctrl + S or shift + ctrl + S. I could also record the entire lot by returning to the bridge with shift + ctrl + W and saying I want to save the changes. This meant only confirming the JPG compression to each. However PS decided now he wants to save images that were cut in the form of PSD files. Changes in layer of layer 0 so each image must pass through a menu that adds hours to my workflow. Is it possible to fix the thid behavior without having to reinstall the program?

  Hello, if you are in CS6, you must disable the non-destructive nature of the now default to the crop tool. In the options bar, select 'remove the trimming pixels' in the options bar: ('G' in the following image)

  By default, the CS6 crop tool hides instead of delete pixels, to be able to go back and cancel. To do this, it jumps to the background image to a layer. And because the jpeg format cannot have a layer, Photoshop offers to save the PSD file.

  

  from: http://helpx.adobe.com/photoshop/using/crop-straighten-photos.html#crop_images

• I downloaded LR CC to my new computer, but now all my images appear in my parent folder, instead of subfolders as was the case before, when my parent folders were subfolders with my RAW files and my parent folder was nothing until I saved my processed

  After you download LR CC on my new computer running Windows 10 (from WIN 7) my parents and subfolders files appear as that which means that although I can still see my subfolders they are linked in the folder of my parents so I can't have a parent folder. Does anyone know how to fix this?

  I'm not sure I understand the problem. However, in the library menu, there is an option to show pictures in subfolders. If this option is checked, and then click the folder in the foreground will show all images in subfolders. If you do not want this behavior, then uncheck this option. If this isn't the problem that you are experiencing, please describe in more detail and possibly include a screenshot.

• Saving images in Lightroom.

  Hi, I'm new to Lightroom and I have a question about saving the photos... Is it possible to record the original photo as well as edited? I would like them both but I don't know how to save them both... in LIghtroom, it seems just to edit the image and then the original disappeared...

  Lightroom is a parametric Editor. This means that, instead of physically changing the pixels of the image, all the changes you make are stored as directives of the catalogue which is a database. As a result, the original image never gets changed by Lightroom. It is good because you don't have an original master image to worry. If you want different versions of this image, you can create virtual copies. A virtual copy is just another set of instructions in the database that reference the same original image. If you want copies, you must use the export function. In General, I usually just handle my original images. And when I want to send the image to someone else I export a JPEG copy for this purpose. Once this done, I consider that sustainable JPEG images and generally don't keep.

• Computer Dell laptop/windows xp, got virus.tried to fix. BAD IDEA. ERROR: DLL msgina.dll UI winlogon.exe - bad image.logon failed to load.

  Computer Dell laptop of my husband has a virus that wants you to install a fake security program. I tried to fix it. OOPS. I tried to choose an earlier date to restore your computer to and I got zapped, crashed and burned. Error is now: winlogon.exe - bad image then the msgina.dll login user interface DLL failed to load, contact admin to replace the dll or restore the original dll. I don't have a boot cd. Is there a way of "back door" to get his computer works again?

  As you know now, do a restore of the system on a severely infected machine is not a good thing. Better to save the data and do a clean installation of Windows. You can try to do it yourself, but based on your post, which I would not recommend it. I don't mean to hurt your feelings, just to be practical. It would be better to take the machine to a competent local tech (not a type of BigComputerStore/GeekSquad of the place).

  If you really want to try it yourself, here's what you need to do:

  1. start the computer with Linux Livecd such as Knoppix. You are using Linux, copy the data files on an external hard drive.
  2. install Windows using the XP Dell installation CD.
  3. install all the drivers for Dell. Use the Dell Resource CD or get the drivers from the Dell advance website.
  4. switch to XP Service Pack 3 and do all the Windows updates.
  5. install a good antivirus - NOD32 (commercial), Avast or Avira (both have free versions).
  6. install all other desired programs, updated if necessary (especially if you have MS Office).
  7. analyze data saved with the antivirus before you copy it to the new clean install. MS - MVP - Elephant Boy computers - don't panic!

• Saving image with data in QVariant

  JPEG image is converted to QVariant (with bb::cascades:Image) by using the following code

  m_image is bb::cascades:Image

  m_image = bb::cascades:Image (imageData);

  Converted to QVariant using QVariant::fromValue (m_image)

  The image is displayed in qml. (I can't save the file immediately after uploading there will be a lot of pictures and I have to select and save.) When the image is displayed his QVariant...

  I would like to save this image, who subsequently to use as Photo of Contact...

  I saw the code example

  imageData1 is QByteArray

  Image image = QImage::fromData (imageData1, "BMP");
  QFile outFile("shared/photos/temp1.bmp"); change the path to your file
  outFile.open (QIODevice::WriteOnly);
  image. Save (& outFile, "JPEG");

  I tried to convert the QVariant to QByteArray using QVariant.toByteArray (). but it did not work.

  Any help will be really appreciated...

  The problem is solved by standing around ImageData object of data instead of the Image object. By using the following code...

  Demonstration of QByteArray = ImageConverter::encode ("image/jpeg", myImageData);
  QImage image = QImage::fromData (demonstration, "JPEG");
  QString imgPath = "shared/photos/"+myImageName+".jpg";

  If (!) QFile::exists(imgPath))))
  {
  QFile outFile (imgPath);

  outFile.open (QIODevice::WriteOnly);
  image. Save (& outFile, "JPEG");
  }

• Why do PNG images render with twinkle, but JPEG images are not?

  I spent the last hours of many track down a problem that I had never seen before to the Prime Minister.

  I created a short video based on a PowerPoint, video mixing live with exported slides.  To maximize the quality of the blades, I exported the today as png, enter in the timeline in the form of static images, with nothing else than the crossfades to make them go back and forth on top of the live video.

  When rendering, always those images were all jittering, juttering, or whatever you want to call as they jumped up and down 3 to 5 pixels on once per second.

  I tried to change the anti-flicker filter in the motion effect.  I tried 'Always Deinterlace' and "Suppression of the flickering" in the Options field.  No one makes all the difference.  I tried made 1080 p instead of 720 p, thinking that there is perhaps a problem to subpixel.  None of this has made all the difference.

  What works has been re - export the PowerPoint to JPEG.  I swapped the images, and voila, the question of the Jutters/Jig/flicker disappeared.

  Adobe, what is so bad about PNGs?

  I found a solution in another thread:

  In export settings, click "USE MAXIMUM QUALITY RENDERING" don't know if this option is for each export, but it cleared up the problem for me export a H.264