Saving settings Tecra M11 - fan almost always on

Similar Questions

• Re: Tecra M11 sudennly freezes and the cooling fan starts to run

  My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

  Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
  Clues?
  Thank you

  You must understand that on this virtual path, it is not easy to say what the problem is here.
  I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

  Try to check in the Task Manager, if something like that happen.

  I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

• Portege M800: The fan is almost always on

  Hello!

  I have a Portege M800 M105 with Vista 64 bit. The fan is almost always on despite the fact that the temperature of the CPU is about 43 to 46 Grad Celsius and the CPU has nothing to do. I used the program Speedfan (http://www.almico.com/speedfan.php) to display the temperature. I find that the noise of the fan is very noisy.
  Is there a possibility to control the fan, so that it will be only noisy when the temperature is high?

  Best regards
  Sven

  Hello

  You are right. The Toshiba Power Saver for Win XP looks completely different as the Vista energy saver.
  But you can also change many settings in Vista energy saver that contribute to the use of the battery power decreases.

  The power settings are a bit hidden in the Vista energy saver but check this thread posted by Jayjay:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

  You will find a link to the doc of Toshiba:
  [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]

  How to manage power settings in Vista there are has many useful tips.

  Hopw this helps.

  Good bye

• Fan runs almost always since the installation of Sierra and MacBook Air running Mac OS.

  Hello

  Since upgrading to Mac OS Sierra last night on my MacBook Air (2013, i7, 8gbRAM), fans work almost always, even when I use Safari.  Previously, the fans would go only when I was playing a game, or video edition.  The basis of my Macbook Air is also much more hot he was under El Capitan - once again, just when you use Safari.  As a result, my battery life is horrible - dropped from 100% to 23% in a little over an hour.  Once again, under El Capitan, if I was just using internet, use of an hour would see the maximum of 10 to 15% of decline in battery.

  I turned off my Macbook Air and it turned on again after fifteen minutes, but in 10-15 minutes, fans revived upward and the base (and the top of the keyboard) heated again.  No uncomfortable levels, but certainly noticeable levels.

  Just to remind - I use Safari only when this happens.  Moreover, since the beginning of this question five minutes ago, the % of battery has dropped from 29 percent to 22 percent and the fans are still whirring like the dickens.

  No idea why this is happening?

  Hello, take a look at this maybe of http://www.macworld.co.uk/feature/mac/fix-overheating-macbook-3592266/ article it will help.

• Portege Z830 - fan noisy and almost always running

  My new Portege Z830 has the issue of noisy fan and almost always running which has been said here before.

  Recommendations were that we download bios 1.6. But I checked and that the version is already installed on my machine. I also adjusted the power save mode battery parameters as others have suggested. But that made no difference,

  All the other tips has been give in technical language far this beginner.

  If anyone has any suggestions they might put in words of one syllable and the step by step instructions, I would be eternally grateful. Thank you.

  I found also two documents from Toshiba on exactly this topic and as saying that update BIOS version 1.60 or higher would solve the problem

  Portege / Satellite Z830 high cooling fan speed.
  http://APS2.toshiba-tro.de/KB0/TSB23039P0000R01.htm

  and

  How can I improve the control of the FAN on the Satellite and Portégé Z830?
  http://APS2.toshiba-tro.de/KB0/FAQ22039H0002R01.htm

• Tecra M10 of the fan is always on

  Hello

  I have a Toshiba Tecra M10 for a few days now, and compared to my previous laptop, I notice a very different behavior of the fan. The fan of my old Pro L10 of Satellite used to turn off unless the system is really hot. It is around 55 to 60 ° C. But now, with my Tecra, the fan starts as soon as the system starts up and never stops. This happens even on a cold start. It seems that the BIOS triggers the fan, as it happened also during the installation of Windows Vista and Windows XP. Certainly, it is not focused on the OS. Even when I have the CPU clock to 798 MHz and set the cooling method to maximize the life of the battery, the fan is running and.

  After watching the temperatures, it turned out that my CPU(-cores) worked at 30 ° C, and my hard drive was running at 35 ° C. The hottest thing was the NVIDIA Quadro NVS 150 M, at 40 ° C. So you mean that the fan is working to cool the GPU. However, as I wrote above, fans don't always run, even if all of the computer is under 20 ° C.
  So I have two questions, and I hope that everyone can answer that for me.
  First of all I would like to know if there are other users of the Tecra A10/M10 who experience the same "problem" as I do. Can he be considered a defect, or is - this normal?

  And second, if it's quite normal, is there a way to turn the fan "always you"-thing off in the BIOS? As I am blind I can't verify this for me, so I would like to know if this is possible, before asking a friend or compared to help me.
  I ask all this because the noise of the fan that bothers me, but simply because I want the best squeesh out of my battery.

  Thanks in advance!

  The fan changes speed? Or it's a constant speed of 100% of the time?

  Try to update the BIOS first. You can download the latest version of the BIOS on Toshiba website in the support/downloads section.

  I don't think there is a setting "always on" in the BIOS.

  If a BIOS update does not help, you must send it to a Service Center authorized to check the functionality of the fan.

• Tecra M11 with Fedora x 64-Hang and fan of overtaking

  Hi all

  I got a lot of Toshiba laptops in the past and so far I run Fedora on it without problem.

  Since a few weeks I had a new Tecra M11 and I installed Fedora x 64 on it.

  Unfortunately, from time to time I have a problem: laptop freezes and after a few seconds fan invaded. In this case, I have no choice and I have to stop my laptop by pressing power button.

  I've updated the BIOS with the latest version available and since the problem occurs less often, but I continue to meet with he...

  Any help?

  Hi mate

  I think that Windows 7 is pre-installed on this laptop.
  Have you noticed the same behavior for laptop with Windows 7?

  I m asking this because it is not easy to say if it could be linked to the operating system or hardware problem... you know...

• Tecra M11 - random crashes with Windows 7

  We had a Toshiba Tecra M11 Windows 7 who has a problem in which he randomly falls down, forcing the user to hard it reboot. When it crashes, the fans to the top spin, don't know if that means anything. We tried many things to fix.

  At first, we thought it might be overheating, which would explain the fan, but the laptop has been through a 24-hour stress test absolutely perfect with normal temperatures. The laptop is not necesarrily do something stressful when it fails we also tried reinstalling some of the key drivers and also intalled the BIOS more recent (2.60), but still the same problem.

  It breaks down up to 2 times per day, but can also go a few days without crashing. It's a very strange problem and we would highly appreciate a fix for it.

  Thank you

  George

  Hello

  Maybe it s RAM related question RAM memory may be affected and would force the OS crashing
  I put t know if that would be helpful, but try to test the memory, run the memtest86 utility
  But note; These controls are not always successful means that even the memory is faulty, the error may not be detected by these software

  Have you tried to reinstall the OS?
  This should be done as well.

• Fan is always running on my Satellite Pro L670-17R

  Hi all

  First of all, I'm french, so excuse me for my poor English. I'll try to explain my problem. I've just bought a satellite Pro L670-17R, core i5 450, ati 5650.

  As I only work with the word or surf the web, fan runs always every two minutes. I checked the temperature of the processor (with pc health monitor from toshiba), and it gives me 37 ° C which seem quite normal.
  I'm trying to change an option in the Panel, but without success, anything in the bios, to set the speed of the fan over the CPU usage.

  If you have any ideas or suggestions, it would be great.

  Next

  France Fabrice

  If you want to reduce the speed of the fan cooling use the balanced power plan and go into the advanced power settings.
  Energy saving of Toshiba you will find the option called cooling method. Assign the optimised battery.
  Cooling fan should run on low speed.

  Check it out.

• Tecra M11-h-13 Diode GPU overheating

  This probably have no effect as each time that I called Toshiba tech support.
  But I'll try anyway.
  I bought a Toshiba M11-h-13 August since so I need him sent for warranty twice, the first time it was the same problem that has been described in the topic:
  Toshiba Tecra M11 - random crashes with Windows 7
  The motherboard has been replaced.
  A week later, the second problem started. I started to hear the fan sniping faster, but air, it wasn't hot. I run Toshiba health monitor and saw that the internal system temperature and fan speed is always higher than 80%, then I installed Everest which shows me the temperatures of some components, one of them it is strangely warm, Diode GPU, without any program that runs the temperature is above 80 ° c/90 ° c, and the processor and HD was 50 ° c and 35 ° c (approximately).

  After that, I left my pc in security again, and once more, the motherboard has been replaced.

  Again, more or less a week later, the same old problem appeared again, in support of Toshiba, they gave no attention to my problem, they only told to leave my tecra still in warranty, but this time, I can´t be without him, I'm in College, I have a good number of works to show in classes and at home , the examinations to study and I have not the time to leave as security again with the same problem.

  I bought a Tecra because he assumes a laptop no problem, but I was wrong.

  I beg you (Toshiba), to give me a solution to my problem, I think it is unacceptable.

  When I work, sometimes with programs that was not supposed to use image as matlab when it's calculus, the GPU diode reaches 125 ° c more then, and when I'm in class and I need to have a job to give my teacher on the end off the class I stop can´t or my notes will be '0' in which works.

  The rest of the temperatures remain much below that level, as the processor at 75 ° c and HD 30 ºC.

  I don't know just what to do more, I have restart my laptop, it is updated bios.

  Solution please...

  Best regards
  Jaime Araújo

  A few questions:

  (1) are the vents breathe easily? The system may overheat if the vents are blocked.

  (2) have you tried to remove any dust or dirt build up? Try spraying Compressed Air from the vent.

  (3) are to you using the display standard driver from Toshiba Web site? Install the other drivers can cause this kind of problem.

• Fan is always running on Satellite L350D - 12 M

  Hello

  I just wanted to ask - is it normal for a laptop to be fan always on as soon as I turn on the laptop fan comes in and hot air out its an AMD Athlon x 2.

  Thanks for any info

  On most of the portable fan will begin to operate a few seconds after turning on the laptop computer.
  Is that CPU reached high enough temperatures in seconds and cooling sensors detect it and fan will begin to run fast enough.

  When the operating system is loaded fans will run more silent. You can reduce the activity of fan if you change the value of cooling method in Toshiba saving settings.
  This option, you can find in the advanced settings of the power plan that you use.

  I have the Satellite L300D before me and it runs pretty quiet after changing the value of the cooling method. Simply, set it to optimized battery.

• Satellite A100-159 - FAN is always on

  Hello
  I bought Satellite A100 159 with T2500 and Radeon x 1600.
  Fan is always on. I've updated the bios and it did not help. What is more, when I put the driver ATI PowerPlay to use and when the battery is low, I get only a few scratches on the desk and the computer restarts. Windows indicates that there is problem with unknown driver.
  What can I do to stop the FAN - my CPU temperature is 28-31 cellsius and the frequency is always set to 2000 MHz (everest watch 1995 MHz).
  I think that, this fan should not run while the temperature is so low. My old centrino almost always has 40 to 50 degrees and the fan is always disabled.
  What can I do more to make the fan only works when the temperature is above 40 degrees?

  Kind regards

  I should add that my old Acer TM 4502 with Centrino has SpeedStep that makes of changing speed from 500 MHz to 1600 MHz CPU. I would like to do with my new Satellite - it might help with the problem of fan. If I change the speed of the CPU that the temperature will be lower and the fan does not spin all the time.
  I noticed that the fan is stopped when I start the computer in the morning when it is cool. After windows starts when rizes temp fan starts and doesn't stop.

  Kind regards

  Hello

  The Toshiba power saver is responsible for the processor and the fan controlling.
  Please open the energy saving mode you are using, choose the menu Basic tab and change the option method of cooling to a lower level. In addition, you can change the method of control of the CPU to auto.
  This procedure should allow to change the use of the fan.

• How do I reinstall my Tecra M11-103?

  I need to (re) format my laptop, I have a Tecra M11-103 with Windows 7 pro 64-bit. I got it with only a downgrade WXP CD but no CD installation of Windows 7.

  Laptop is no longer under warranty. How can I reformat? It seems that I used to have nero backup software as it came bundled with laptop for a long time (a format under warranty and) there are...

  Is it possible to get new nero?
  Thank you
  E

  Hello

  According to tender specifications that your Tecra has been delivered with preinstalled WIN7 64 bit PROFESSIONAL and you have DVD extra WXP. Original recovery Win7 image was recorded on the HARD drive and use preinstalled Toshiba recovery media creator you have had the opportunity to backup recovery image and create the installation of bootable recovery disk.
  How it works is described in the document s user manuals.

  I put t know if you created this disk but now after installing Windows XP Home edition, you need the recovery disc. Of course, if you want to have the factory settings, you need this record. Otherwise, you can obtain the Microsoft installation disc and install Win7. Download page for all the necessary drivers, tools and utilities, you can find and download from Toshiba.

  I hope you understand the situation, but if you have any other questions do not hesitate.

• Tecra M11 - 11J - cannot install Windows 7 64 bit

  Tried to upgrade a Tecra M11 - 11J for Windows 7 64-bit.
  The installation gets all the "Loading Windows files" screen, then turns off and freezes, with the release of maxing out CPU fan but no HARD disk activity.

  Have tried to reinstall XP (works fine), flashing the BIOS to the latest version, re-seats of the RAM, change the HARD drive in "Compatibility" mode and reinstall Win 7 - same problem.

  Have you tried Win 7 32 bit - the same problem.
  Installation of USB, instead of DVD - same problem.
  Different flavors of Win 7 - same problem!

  It's extremely frustrating.
  I upgraded the memory up to 8 GB, hoping to take advantage of this with W7x64 and now I'm stuck with a XP machine and 4 GB of of of the RAM to lose.

  Would be very grateful for any suggestion.

  Thank you.

  and installation of Win 7 does not even using the old 4 GB of RAM?

  Or have you tried to install Windows 7 on the Tecra M11 using the new 8 GB of RAM?

  What of the HARD drive? The HARD drive is displayed on the first page of the BIOS?

• Tecra M11 - Ethernet fried

  Tecra M11 - 10 d

  Recently, I connected a network cable for my laptop. This cable seems to be a Poe cable. Ethernet standard, but with a power supply to power a video conference phone.

  After this event, my network card does not work. Ethernet lights don't work. My windows 7 says that a cable is not connected.

  In Device Manager, I uninstalled the network device and when I'm looking for material changes it finds my network device but it still does not work. It is not a software problem.

  Is it possible for this Poe cable to have fried my Ethernet card?
  Any suggestions to resurrect my Ethernet?

  To be honest I put t have experience with these issues but if you want to test how the hardware install original recovery image and test the operation of the equipment with the settings.

  It is certainly the best way to test the operation of the equipment.

  Please post comments.