Saw the shooting of problem on Windows Firewall

Similar Questions

• What is the last solution for the problem disabled Windows Firewall in Vista?

  I have Windows vista 64 bit on a PC.
  I've tried about 5 different error 0x6D9 code search solutions.
  Nothing seems to help.
  I don't understand this one: http://blogs.technet.com/b/networking/archive/2011/06/08/the-windows-firewall-service-fails-to-start-introduction.aspx
  In short, when I pull up the GUI firewall I press "Turn firewall on or off" and get "due to an unidentified problem, Windows cannot display Windows Firewall settings.
  When I hit "Update settings now", I hear a 'boing '.
  When I pull up of Windows Firewall with advanced security, I said that "Windows Firewall with Security Advanced snap-in failed to load." Restart the firewall service on the computer that you are managing. Error 0x6D9 code.
  In addition, Security Center is not displayed.
  My firewall has been down for at least 5 months. I've ignored except that now I really need for my taxes. TurboTax does not refresh without a firewall running, it seems.
  I tried: Windows updates. Yes, they have updated.
  I disabled my firewall.
  I turned off the normal charge and tried to do a clean load without any program except for MS loading programs.  http://support.Microsoft.com/kb/929135
  I tried to do the Security Center to activate automatically by running services. The only problem is that there is no security poster Center.
  http://www.Vistax64.com/system-security/197568-Security-Center-service-cant-started.html
  Under the instructions on How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7 , I ran the scan of the file system (sfc/scannow) checker. It found corrupted files, but the system said that they couldn'b be repaired. http://support.Microsoft.com/kb/929833
  I cannot access the analysis files and don't know what I'd do, even if I could read. seems http://support.Microsoft.com/kb/929833 is beyond me.
  Y at - he other recent advice?
  I disable Kaspersky when I do this job, but I regularly clean the computer with K and let it run.
  Thanks for any advice.
  Stephen

  I suggest you contact TurboTax and poster in their Live community forums.
  They should be able to tell you how to pass your file.

  https://TtlC.Intuit.com/post/show_all_posts?category_id=0

  Thank you

• The center of security and Windows Firewall does not.

  I run MSE and Windows Firewall. The Security Center will pop up and tell me my firewall is disabled and I'm unprotected. When I check the recommendations, sometimes it is still on! Other times it is turned off, turn back on and someday or later does it again. This is what would serve turn off my Windows Firewall or give false information on it power status?

  Hi saltydad,

  From the description, even if you use MSE does participate or part of this problem.  It is a problem between the Security Center and Windows Firewall.

  First, try the following fix, as he helped others with a similar problem: http://social.microsoft.com/forums/en-US/onecarefirewall/thread/c0ca9eb2-14b0-4591-be85-4b7fd1700191/.

  If this does not work, please repost it here: http://answers.microsoft.com/en-us/windows/forum/security?page=1&tab=all&tm=1300700638376 and to the top where it says Windows Version uses the dropmenu to choose your version if you go on the appropriate forum for your system.  They will be more than happy to help you with these questions.

  I hope this helps.

  Good luck!

• After you run the 2011-12-15 updates, Windows Firewall does not start.

  I have my computer set up to run automatically updates. After the last set of updates, I am unable to start Windows Firewall by all means. Service, Mpssvc has an error message "cannot read the description: error code 15100" when I check it in the Services window. I am running Vista Home Premium 64-bit with Service Pack 2 installed.

  I ran the Microsoft Fixit for firewall services and received the message that "Windows Firewall service is not running or is not started. The Fixit was not able to start the firewall and Mpssvc.

  Hello

  -What updates caused the problem to occur?

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   

  Follow these methods and see if the problem still occurs.

  Method 1:

  Do SFC scan and check if the problem is related to the integrity of system files.

  Method 2:

  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• Problems starting Windows Firewall in Vista 64-bit

  I have a laptop HP with Windows Vista 64-bit installed. A few weeks ago, I started getting a message that the Windows Firewall did not work. I tried to restart it via the Control Panel, but it won't allow me. I tried to run tools of analysis for possible corrupt files, disabled through the System Configuration utility in the control panel services and rebooted, etc.. When the system boots, the message "problem reports and solutions has stopped working" is displayed, followed by other messages and ends with a message that the firewall does not work. I think that all messages are attached together as a resuly of the firewall issue.

  In addition, I installed Microsoft Security Essentials, which need to make updates. Whenever he tries to do, it cannot and still once, probably because the firewall does not work. He continues to make an attempt to update and will not stop doing so, even after clicking on "Cancel Update" when its window is opened.

  I brought no changes to software that would have caused the firewall to stop working and can only assume that the question was created by one or more software updates automatic in the past two weeks, either from Microsoft or from HP.

  All attempts to resolve the issue have failed, and I hope someone can help me without providing links to register software or driver that force me to buy them or not and can never help to solve the problem.

  Any help would be greatly appreciated: it has become quite frustrating.

  Hello

  Disabling Services is not a good idea.

  First, analyze your computer of viruses and malware.

  If it's clean, or you found a few "junk" and it does not work after cleaning...

  Open a command prompt, type sfc/scannow and press ENTER.

  It must analyse the system files and replaces incorrect versions with appropriate Microsoft versions.
   
  This document contains more information on SFC scan: http://support.microsoft.com/kb/929833

  If this process cannot run or get caught in the middle or also shows a lot of errors and cannot fix. I'm afraid you're better to make the backup of your data and reinstall the operating system.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Problems with Windows Firewall

  Recently, I removed Windows Live OneCare from my laptop and installed Windows Security Essentials.

  I am running Vista Home Premium (32) with all of its updates. I access my internet through a network that is secured via a router.

  When I turn on the Windows Firewall, my internet connection is interrupted. I still have my network connection, but do not have access to internet; the connection icon network in the system tray will blink with the globe to Flash only without the globe and goes the saying "local and internet" to "local only".

  I get out at a loss to figure it and could use some help.

  Thank you!

  Microsoft support has helped me solve my problem!

  Just a simple default reset in the security settings of the firewall.

• I get a 0x80070424c error Code when I try to use the recommended settings for my Windows Firewall

  My PC suddenly stopped sharing music to my Xbox over the 3 days.

  My firewall is weird and it is said that "the Windows Firewall does not use recommended settings to help protect your computer.

  When I click to use the recommended settings, I get an 0x80070424c error Code. I tried following the steps here: http://support.microsoft.com/kb/968002 and it did not work

  Hello

  If you are having problems turning on Windows Firewall, follow these instructions:
  Download and install Windows Repair: '
  http://www.bleepingcomputer.com/download/Windows-repair-all-in-one/
  When repairing Windows opens, click the tab for Startup Repairs click Start. Clear all check boxes except for the following four:

  -Reset the registry permissions

  -Reset the permissions of files

  -WMI repair

  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer.
  I hope this helps you.
  Brian

• "Failed to start the sharing service connection of Windows Firewall/Internet (ICS) on local computer. Error 5: access is denied. »

  I had a problem with a virus earlier. I had the problem for most supported but now my firewall is disabled, and whenever I try to turn it on I get this error message. I don't know what to do, I have tried everything I can think of exscept a complete re - format. In addition to that my audio drivers keep uninstall themselves every hour or so sometimes he finally a little more. I tried everything I could to remedy these problems, but nothing has worked.

  Hello purple squirrel.

  You can try to do a upgrade in Place or repair your operating system to Windows XP.
  Click the number of the KB article to bring up instructions to complete an upgrade in Place.

  KB Article ID: 978788 -how to perform an upgrade on the spot (reinstallation) of Windows XP
  You will need to have a Windows XP CD and your product ID to reinstall. It is a long process. You won't have to reinstall programs, but you will
  you need to reinstall the Service Packs and Windows updates.
  Be sure and print the item for you reference, and be sure you understand what is needed before starting the repair.
  Please let us know if we can help with any questions.
  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I have "PnkBstrA and PnkBstrB" under the list of exceptions in Windows Firewall?

  Original title: Firewall exceptions

  Before we begin, I would like to thank those who helped me in the past and as it may seem, I ignored, I tend to use the internet services and e-mail in a chaotic way, but if I forgot to answer or acknowledge a contributor I apologize. My question is about two entries in the list programs and services on the tab exceptions in firewall windows PnkBstrA and PnkBstrB, and if I can uncheck and remove them I do not play any type of online games which I am told they are connected?  I use XP (SP3) to House thanks.

  Whack em.

• "The user profile service failed the log - on" problem of Windows XP administrator account

  OK, so my mom is unable to log on to his profile on Windows XP Home Edition. She has both the administrator account. When she tries to connect, you will see the above error message. My brother can log into his account without problem.

  My mother told me that she had initially gone on ITunes and downloaded 3 things that the program said she needed. When she went to reboot his computer according to the instructions, she received this error message and cannot connect.

  She then guest account and was able to remove the 3 programs, but nothing helped. If anyone has any ideas, it would be appreciated. This is the Windows program that is already installed on the computer.

  I tried to search in the forums, but it's a little confusing. She got also never all warnings "temporary profile".

  Thank you!

  Looks like the user profile is damaged.  To allow for the recovery, you will need to log in with an administrator account.  If your MOM was the only administrator account, try starting mode safe mode (F8 at startup) and log in as user 'administrator '.  The default value is the empty password.  After that, follow the steps in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How do I solve the kcrtx86 down problem in Windows 7

  I have Tuneup utilities installed on my windows 7 and several times, she shows that a unit named "kcrtx86" in does not. If I restart once the problem is solved but to be returned after some time again. and a few reboot same time does not help.

  now, if a device does not work, a layman user like me doesn't have too much problem with the usual routine tasks except that my gadgets Google desktop crash from time to time & then and refused to restart :(

  In addition, although very few, but some of my apps randomly crash/stop work & I have to restart these applications.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you have a problem with kcrtx86. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. Once you get the error message "kcrtx86 does not?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

   

  Method 2:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Number of Collisions in the shooting game problem

  Hello, I work a simple game in which a ship fires at the approach of asteroids, and I have problems with the collision between the ship and the

  asteroid. In the movieClipI ship made incandescent chassis 6 to mean the 3 first collisions and the loss of life, and then for the fourth collision I have

  made an alpha of the 87 frame interpolation inside the boat so that he disappeared to signify the end of the game. I used a meter as shown below but all the ship

  fact is never gets so glow frame 87. Thank you for taking the time to see it.

  import of important flash libraries.
  import flash.events.KeyboardEvent;
  import flash.events.Event;
  import flash.display.MovieClip;
  import flash.display.Sprite;

  var countCollisions:Number = 0;
  var astArray:Array = new Array();
  var speed: Number = 10;
  Initializes the variables.
  var key_left:Boolean = false;
  var key_right:Boolean = false;
  var key_up:Boolean = false;
  var key_down:Boolean = false;
  var key_space:Boolean = false;
  var shootLimiter:Number = 0;
  Checks if the player presses a button.

  var: timer = new Timer(2000, 10);
  timer.addEventListener (TimerEvent.TIMER, AddAsteroid);
  Timer.Start ();

  stage.addEventListener (KeyboardEvent.KEY_DOWN, KeyDown);
  stage.addEventListener (KeyboardEvent.KEY_UP, KeyUp);

  var ship: MovieClip = new Ship()
  var backgr:MovieClip = new Background();

  backgr.x = 0;
  backgr.y = 45;
  addChild (backgr);
  addChild (ship);

  function AddAsteroid(e:TimerEvent):void
  {
  
  var asteroid: MovieClip = new Asteroid();
  Asteroid.x = 800;
  Asteroid.y = Math.round (Math.random () * 700);
  astArray.push (asteroid);
  addChild (asteroid);
  asteroid.addEventListener (Event.ENTER_FRAME, asteroidmove);

  function asteroidmove(e:Event):void
  {
  Asteroid.x-
  ///
  

  ///
  
  for (var i = 0; i < astArray.length; i ++)
  {
  

  If (astArray [i] .hitTestObject (Ship))
  {
  countCollisions ++;
  ship.gotoAndPlay (6).
  
  if(countCollisions ==4)
  {
  ship.gotoAndPlay (87);
  }
  If (astArray [i] .stage)
  {
  removeChild (astArray [i]);
  removeEventListener (Event.ENTER_FRAME, asteroidmove);
  }
  
  
  }
  }
  
  }

  }

  addEventListener (Event.ENTER_FRAME, backgroundmove);

  function backgroundmove(e:Event):void
  {
  backgr.x-= 1;
  
  If (backgr.x <-2110)
  {
  backgr.x = 0;
  }
  }

  Allows the main function play each image.
  addEventListener (Event.ENTER_FRAME, Main);
  
  Create the main function.
  main function (event: Event) {}
  CheckKeys();
  }
  
  Create the function KeyDown.
  function KeyDown(event:KeyboardEvent) {}
  if(Event.keycode == 37) {//checks if left arrowkey is pressed.
  key_left = true;
  }
  if(Event.keycode == 39) {//checks if right arrowkey is pressed.
  key_right = true;
  }
  if(Event.keycode == 38) {//checks if some arrowkey is pressed.}
  key_up = true;
  }
  if(Event.keycode == 40) {//checks if the arrowkey is pressed.
  Key_Down = true;
  }
  if(Event.keycode == 32) {//checks if the arrowkey is pressed.
  key_space = true;
  
  }
  }
  
  function KeyUp(event:KeyboardEvent) {}
  if(Event.keycode == 37) {//checks if left arrowkey is released.
  key_left = false;
  }
  if(Event.keycode == 39) {//checks if right arrowkey is released.
  key_right = false;
  }
  if(Event.keycode == 38) {//checks if some arrowkey is released.}
  key_up = false;
  }
  if(Event.keycode == 40) {//checks if the arrowkey is released.
  Key_Down = false;
  }
  if(Event.keycode == 32) {//checks if the arrowkey is released.
  key_space = false;
  }
  }
  
  function CheckKeys()
  {
  shootLimiter += 1;
  
  If (key_left)
  {
  setDirection (1);
  Ship.x-= 5;
  }
  If (key_right)
  {
  setDirection (0);
  Ship.x += 5;
  
  }
  {if (key_up)}
  Ship.y-= 5;
  }
  {if (Key_Down)}
  Ship.y += 5;
  }
  
  If ((key_space) & & (shootLimiter > 8))
  {
  shootLimiter = 0;
  var b = new Bullet();
  addChild (b);
  b.x = ship.x + 50;
  b.y = ship.y + 3;
  addEventListener (Event.ENTER_FRAME, moveBullet);
  }

  function moveBullet(e:Event):void
  {
  b.x += 10;
  
  If (b.x > 600)
  {
  If (Contains (b))
  {
  removeChild (b);
  }
  removeEventListener (Event.ENTER_FRAME, moveBullet);

  }
  for (var i = 0; i < astArray.length; i ++)
  {
  If (astArray [i] .hitTestObject (b))
  {
  removeChild (b);
  removeChild (astArray [i]);
  
  removeEventListener (Event.ENTER_FRAME, moveBullet);
  }
  }
  }
  }
  function setDirection (param) {}
  If (param == 0) {}
  
  ship.scaleX = 1;
  } else {}
  ship.scaleX = - 1;
  }

  }

  You're a little around with it and you have not yet removed the asteroid of the table... see if what follows helps to resolve the issues...

  for (var i = 0; i)

  {if (astArray [i] .hitTestObject (Ship))}

  get rid of the asteroid
  MovieClip(astArray[i]).removeEventListener (Event.ENTER_FRAME, asteroidmove);
  removeChild (astArray [i]);
  astArray.splice (i, 1);
    
  countCollisions ++;
   
  If (countCollisions > = 4) {}
  ship.gotoAndPlay (87);
  } else {}
  ship.gotoAndPlay (6).
  }
  }

  }

• I have a problem with the Windows Firewall.

  Original title: Firewall Windows does nothing, any ideas please error due to unidentified problem window

  I have windows xp sp3 with internet explore 8 and windows firewall when you press says in a window because of unidentified problem, Windows cannot display Windows settiings firewall.

  Hello

  This problem is caused by a missing or corrupted SharedAccess.reg file. The SharedAccess.reg file represents the Windows Firewall service.

  1. you have any other firewall software or security running on the computer?

  2. have there been recent changes to the computer before the show?

  I suggest to try the steps provided and check if they help to resolve the issue.

  Method 1: Diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2: You cannot start the Windows Firewall service in Windows XP: http://support.microsoft.com/kb/920074

  Method important this section, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I have a problem with the Windows Firewall enabled.

  Original title: my laptop says, "solve pc problems: turn on the firewall of Windows (important)", but I can't activate the firewall of windows... help me to turn it on

  I see this message,
  ' Pc problem: turn on the firewall of Windows (important).
  but I can't turn on the firewall...
  Help me to activate windows firewall... (I use Microsoft security essential, already, I scan the laptop completely)

  Hi Wendy,.

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service Windows (0x5), BFE service is missing or Windows remote assistance does not work

  Check if the Windows Firewall service is running?

  Go to run (Windows key + R) and type services.msc

  Check if the Windows Firewall service is running.

  Method 1:

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:

  Go to Control Panel , then Action Center

  Click Security and try to turn on the firewall there but once again, make sure that the antivirus installed on your PC do not have its own firewall or it will not illuminate.

  Let us know the result.

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian