Problems starting Windows Firewall in Vista 64-bit

Similar Questions

• What is the last solution for the problem disabled Windows Firewall in Vista?

  I have Windows vista 64 bit on a PC.
  I've tried about 5 different error 0x6D9 code search solutions.
  Nothing seems to help.
  I don't understand this one: http://blogs.technet.com/b/networking/archive/2011/06/08/the-windows-firewall-service-fails-to-start-introduction.aspx
  In short, when I pull up the GUI firewall I press "Turn firewall on or off" and get "due to an unidentified problem, Windows cannot display Windows Firewall settings.
  When I hit "Update settings now", I hear a 'boing '.
  When I pull up of Windows Firewall with advanced security, I said that "Windows Firewall with Security Advanced snap-in failed to load." Restart the firewall service on the computer that you are managing. Error 0x6D9 code.
  In addition, Security Center is not displayed.
  My firewall has been down for at least 5 months. I've ignored except that now I really need for my taxes. TurboTax does not refresh without a firewall running, it seems.
  I tried: Windows updates. Yes, they have updated.
  I disabled my firewall.
  I turned off the normal charge and tried to do a clean load without any program except for MS loading programs.  http://support.Microsoft.com/kb/929135
  I tried to do the Security Center to activate automatically by running services. The only problem is that there is no security poster Center.
  http://www.Vistax64.com/system-security/197568-Security-Center-service-cant-started.html
  Under the instructions on How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7 , I ran the scan of the file system (sfc/scannow) checker. It found corrupted files, but the system said that they couldn'b be repaired. http://support.Microsoft.com/kb/929833
  I cannot access the analysis files and don't know what I'd do, even if I could read. seems http://support.Microsoft.com/kb/929833 is beyond me.
  Y at - he other recent advice?
  I disable Kaspersky when I do this job, but I regularly clean the computer with K and let it run.
  Thanks for any advice.
  Stephen

  I suggest you contact TurboTax and poster in their Live community forums.
  They should be able to tell you how to pass your file.

  https://TtlC.Intuit.com/post/show_all_posts?category_id=0

  Thank you

• Windows Mail on Vista 64-bit.

  Hello

  I'm having a problem with Windows Mail in Vista 64-bit.

  I can read mail without any problems, but when I try to create an e-mail of the area where you type your message is transparent.

  Everything that was on the screen before opening the dialog box "Create mail" shows through the message box and when you try to type anything in there, nothing happens, for example, you don't see any text?

  I looked in the drop down menus to see if there is an option to change this, but I can't find one.

  Please, can anyone help?

  Thanks in advance.

  John.

  Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   

• Firewall Windows gives me "error 1068: the dependency service or group could start" I am on Vista 64 bit.

  I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get

  Error 1068: the dependency service or group could not start
  Things I've done:
  • ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
  • MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
  I've done two things on the command line for (you) help to solve this problem:
  Queryex mpssvc C:\Users\Dan>SC

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  WIN32_EXIT_CODE: 1068 (0X42C)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  PID                : 0

  FLAGS:

  C:\Users\Dan>sc qc mpssvc

  [SC] QueryServiceConfig SUCCESS

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STARTUP TYPE: 2 AUTO_START

  ERROR_CONTROL: 1 NORMAL

  BINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNe

  network

  LOAD_ORDER_GROUP: NetworkProvider

  TAG                : 0

  Display_name: Windows Firewall

  DEPENDENCIES: mpsdrv

  : bfe

  SERVICE_START_NAME: NT Authority\LocalService
  Help me, please?

  Hello

  I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cannot-start-Windows-Firewall-Vista/d1d764c7-8978-48da-B1F1-bb3e394a9a2a

• Error there is a problem starting windows C:\windows\system32\spool\drivers\x64\3\ssnetmon.d64, when you try to open a session

  Original title: ssnetmon.d64 - error message when you connect

  When I log in, I get the following message.
  The message is as follows and appears three times:
  There was a problem starting windows
  C:\windows\system32\spool\drivers\x64\3\ssnetmon. D64

  I use Windows Vista Ultimate 64 bit

  Thank you for your response.

  The problem was due to the Seagull printer driver installation. I just reintalled driver to fix it.

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error message: 0 x 080070005 starting Windows Defender in Vista.

  Original title: 0 x 080070005 error muaueng.dll running

  Hello

  I could not start Windows Defender in Vista, so I looked online and found the instructions to fix it. One of the commands referenced "muaueng.dll". When I run this command, I get the error of 0 x 080070005. I went here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Update-error-0x80070005-need-a-fix-click/e4cb8700-F215-4F1A-8bd4-6457ac619c19

  and used the Accesschk tool. Here is my file txt of the execution of the tool, that this page says to post here in a new message. Here goes:

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005\InstallCounter

  No idea how to solve this problem and open my Windows Defender?

  Steve in Florida

  Hello

  1 are you getting error like muaueng.dll or c:\windows\system32\wuaueng.dll?
  2 did you do changes on the computer before the show?
  3. you receive an error message from Windows Defender?

  Method 1:
  You can follow the steps in the link provided:
  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355

  Method 2:
  You can also check the link provided and check:
  Impossible to activate the application Windows Defender in Windows Vista
  http://support.Microsoft.com/kb/555962

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• have a problem with windows mail using vista, it won't send mail it's just continues to ask the user to verifery a password

  windows Vista mail problem

  have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  It will be useful.

• CDMA Motorola MS600 drivers for Windows 7 or Vista 64-bit

  Hello

  Could someone tell me where to find the drivers for Windows 7 or Vista 64 bit for Korean CDMA Motorola MS600 phone.

  Thank you
  Franck

  They are the ones who write drivers for their products, not from Microsoft.

  It is regrettable, but these days, they prefer to sell a new product.

  Whatever you decide to buy, check its compatibility Vista and Windows 7 as well:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems starting Windows Update now

  Hello

  I run windows vista 64 bit and have a motherboard ASUS striker ultimate with an ATI Radeon 4850 (also ASUS) and a processor intel 2.4 ghz quad core Q6600. Yesterday, I downloaded the optional updates and recommended to my system, at the end of that my system went to restart that failed. I turned off my computer and the screen of the BIOS came to my motherboard. Then I have zero by default, the system and start the computer to the top. My wireless adapter no longer worked and diganose function and repair said he had driver problems. I did a system restore but Hat did not set my start-up problems. I fixed the wireless card drivers, but I still have problems starting. My Hibernate function no longer works, IE will be partially closed but will not again. Also the start of works that after I go into the bios post screen and restore the default values. Does anyone have advice? IM at a loss

  Hi Vanishty2004,

  Thanks for posting your question on the Forums of Windows Vista.

  Do you remember the optional update that was installed on the machine?

  You may need to uninstall the update has been installed on the computer.

  It seems that the windows update caused the BIOS of the computer to be updated, which should also address the issue of the hibernation.

  Contact your computer manufacturer for an updated BIOS.

  WARNING:

  Incorrect version of BIOS update may cause the computer to be unusable. Contact the manufacturer of the computer system administrator for updating the BIOS.

  Hope the information will help. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• How to install windows 7 on vista 64-bit with USB key or usb hard drive

  I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
  Please suggest.

  Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

  ==================================================================

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key:
  1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
  ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
  ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
  4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Also: A quick way to get your Windows 7 into a bootable DVD:
  (This guide is for people using the upgraded version of the students, composed of)
  Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  Use a USB key to install Windows 7 - even on a Netbook:
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  Cannot install Windows 7 error USB "Setup could not create a new partition system:
  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  J W Stuart: http://www.pagestart.com

• Saw the shooting of problem on Windows Firewall

  Hello

  Recently, I had my PC infected with adware/Trojan horses and I suppose also rootkits. I was able to remove them, but my firewall is disabled. Could not activate in the Control Panel, giving me the error code 0 x 80070424. I searched here and came across this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-code-0x80070424-with-windows-firewall/ec3fc3b8-69ec-4b4b-a703-4b745fe6e8ee?page=1

  I followed the instructions and was able to install the Base filtering engine. Once I tried the Windows Firewall starts under services, he gave me the following advice:

  "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. »

  The download link in this thread is not compatible or another problem? It is a HP with Windows 7 Home Premium. Thanks for reading.

  It's hard to say after a bad attack as to what problem is causing what question.

  If you can, back up your data first and backup your registry database, but as a minimum.

  If you want to try to fix the firewall then Microsoft Fix - sound can help - http://support.microsoft.com/fixit/

  Click on 'high solutions' - "address security, privacy or user accounts" and then read and execute only the fixed 'firewall' see if they help.

  Or some of those registry patches can help - see http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-7-xp-vista/ 9, 10, or even 2 for example.

  If you did not already then download, install, update (running as 'run as administrator') and scan with Malwarebytesfree.

  BUT if the attack was bad, it may be a good idea to "scan" Malwarebytes your PC (to check if your data is clean) then backup your data and reinstall Windows from scratch and restore your data.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Try to turn on the Windows Firewall for vista home basic, the code of error 0x6D9

  I need help to turn on my windows vista basic home firewall but get error 0x6D9 code. This makes me crazy... I pay your bills online and can't do anything until my firewall is on

  Hi William,.
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian