Problems with Windows Firewall

Similar Questions

• Problem with Windows XP takes a long time to start

  Hello, I am running Windows xp3 House. I have a problem with my firewall loading Windows. It takes about 2 minutes to load and it is that nothing works (Avira antivirus, Lynksys wireless monitor, etc.) until it starts. Sometimes it loads immediately, and then it's not? Weird. In a search, I found this, http://support.microsoft.com/kb/823612 I ran it.

  He stopped and not responding so I had to turn it off and restart it manually. When I did I got a pop up telling me to activate my Windows, 3 days to activate. I did nothing to mess with windows, it has been installed on my pc when I bought it used and I have no cd or manual as I assume that it is installed at the factory. I know not where the i386 file is and have never been able to actually identify because I'm familiar with it. If my pc becomes unusable because of that I won't be able to use it and I don't know what to do. I did a system restore and it did not work. How to activate Windows if I must / I have to? How can I stop it? I don't know what to do and I need help. Thank you
  Dell Computer Corporation Dimension 4600
  Windows XP Edition Service Pack 3 family
  AVIRA Desktop Version 12.3.0.15
  Linksys Wireless-G PCI adapt
  Piriform Ltd - CCleaner Version 3, 20, 0, 1750
  SUPERAntiSpyware Version 5,
  GlarySoft Ltd. - Glary Utilities Version 2.46
  Malwarebytes Anti - Malware Version 1.60.0080

  GlarySoft Ltd. - Glary Utilities Version 2.46

  It is quite possible that all your problems are due to this dangerous program!

  Of course, any software can have a phenomenon of chance but, I have been using Glary Utilities for years and have never had a single problem.

  To the OP

  Malwarebytes Anti - Malware Version 1.60.0080

  I guess you use Malwarebytes as a scanner at the request since the version you list is obsolete. There are several malware that can cause false activation. My advice to you is first, make sure your computer is not infected. To do this you must first update Malwarebytes and run a full scan. Once that is completed and you have deleted everything which, on the contrary, that was detected you should do the same with SuperAntispyware. View your results.

  On another note, by the unlikely chance, you have the professional version of Malwarebytes and SuperAntispyware know you can't run both at the same time by using the real-time protection. As long as you use one of them as an on-demand scanner, you're ok.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Saw the shooting of problem on Windows Firewall

  Hello

  Recently, I had my PC infected with adware/Trojan horses and I suppose also rootkits. I was able to remove them, but my firewall is disabled. Could not activate in the Control Panel, giving me the error code 0 x 80070424. I searched here and came across this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-code-0x80070424-with-windows-firewall/ec3fc3b8-69ec-4b4b-a703-4b745fe6e8ee?page=1

  I followed the instructions and was able to install the Base filtering engine. Once I tried the Windows Firewall starts under services, he gave me the following advice:

  "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. »

  The download link in this thread is not compatible or another problem? It is a HP with Windows 7 Home Premium. Thanks for reading.

  It's hard to say after a bad attack as to what problem is causing what question.

  If you can, back up your data first and backup your registry database, but as a minimum.

  If you want to try to fix the firewall then Microsoft Fix - sound can help - http://support.microsoft.com/fixit/

  Click on 'high solutions' - "address security, privacy or user accounts" and then read and execute only the fixed 'firewall' see if they help.

  Or some of those registry patches can help - see http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-7-xp-vista/ 9, 10, or even 2 for example.

  If you did not already then download, install, update (running as 'run as administrator') and scan with Malwarebytesfree.

  BUT if the attack was bad, it may be a good idea to "scan" Malwarebytes your PC (to check if your data is clean) then backup your data and reinstall Windows from scratch and restore your data.

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• Problem with Windows 2008 Enterprise

  Hello!

  I have a problem with Windows 2008 Server. I have a server with the operating system and I shared network folders and more restricted to different users. Random users cannot connect to moments share files and then automatically recovers. Remote access to the server is enabled. Sometimes I can connect to the server sometimes didn't. Below is a photo with a message.

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

• are you call customers regarding a problem with windows

  I got a call this morning from someone who claims to be from windows. They told me that here was a problem with windows years asked me to connect to my computer and give them permission to do something to the computer - I declined. Could you please confirm if there is a problem and if the contact was authentic.

  Thank you

  You have made the right choice to reject the call. It's a SCAM well known and is FALSE. Microsoft and partners will NEVER user calls unless you ask them to call or to open a support case. On the other hand there is no way for Microsoft to know who has a problem with PC. Take a look at:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  have you checked on the memory of our pc? Call of duty modern warfare needs at least 2 GB of memory, another thing you need to consider is your video card in your pc windows 7. try to update the first video card drivers. verification of your memory.

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Big problem with Windows XP, IE8

  I have a big problem with windows xp. Many things do not work as they had passed him. For example the personal setting are not recalled from session to session. IE 8 does not funtion properly (icons on the desktop are re-arraged, toolbars cannot be deleted or I'm unable to load pages from the internet). Programs do not work, the files will not open. When I look at my hard C disk folders and files are hidden.

  Recently, IE has been upgraded to IE8 and I installed Norton 360 but I don't mean that they caused the problem. However, whenever the Norton scan executes a "error 8 506 421" stands up and says me that I have to uninstall and re install Norton.» But I lost the ADMIN privileges so I am not able to uninstall or go back to a restore point.

  I can't go in safe mode. Pressing F8 takes me to the quick screen C not the windows safe mode screen. I can't go in safe BOOT mode. INI or the other.

  If I switch to another user, everything seems fine but I don't have ADMIN privileges with this user to be able to make changes.

  Is this a problem with norton? IE8? A virus?

  Any thoughts will be greatly appreciated.

  Thanks in advance,

  Lost without a computer

  It sounds like you have a corrupted for your user to administrator user profile.

  You may be able to recover using System Restore to restore to a point in time before your problem.  Based on the F8 key, you bring in a command prompt window, try to start restoring the system to the command prompt by using the following procedure:

  "How to start the System Restore tool by using the option of safe mode with prompt theCommand in Windows XP"

  <>https://support.Microsoft.com/kb/304449/en-us >

  If this does not work, you can still be able to recover by performing a check disk to your command prompt window operation (after that you press the F8 key).  Enter the following command:

  CHKDSK c: /R

  If you are in the Recovery Console, it can simply begin, or you may need to restart before it will start.  Corrupt profiles are most often caused by the Corruption of system files, so a chkdsk operation should be performed little matter how you end up recovery.  Note that this can take a few hours to run.

  "How to perform disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• I have a problem with windows xp [Fehlernummer: 0 x 80070017]

  I have a problem with windows xp [Fehlernummer: 0 x 80070017]

  Hi cowtipo,

  1. What is the full error message that you receive?

  2. when exactly you receive the error message?

  3. have you done any hardware changes or software on your computer before this problem?

  If you receive the error code during the installation of updates, you can follow this link & check if the problem persists:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070017.

  Hope the helps of information.