Says wireless adapter connected, but still get IP 169...
Recently, I moved into a new House and put everything in place and works with the exception of this computer. Adapter says it's is related to 5 bars and 54 Mbps. I perform repairs, uninstalled and reinstalled, exchanged with an adapter to work known, all closed no programs/services, disabled windows firewall, have no restrictions on the router, disabled anti virus and still no luck.
I'd appreciate any help since my son's pc and he needs for his homework.
Thank you
The problem has proved to be a problem with the WEP key on that particular pc.
Tags: Linksys Adapters
Similar Questions
-
My loggin screen Windows 7 says I'm connected BUT...
My loggin screen Windows 7 says I'm connected but still looking for my password. When I retype it, it tells me that this is not the right password... but when I come back, it always says that I'm connected. How can I get past the loggin screen?
Hello
- You are able to view the desktop?
- Are you sure that you provide the password?
- What do you mean by "" my loggin Windows 7 screen says I'm connected but always looking my password. " ?
If you enter the wrong password, in the prompt below your user name may indicate the computer as user however will not connect unless you provide the password.Check out the link:
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .
original title: status: network address acquisitionHi BKlap,Try these methods in the order.Method 1: Repair the network connection to solve the problem.For more information, see:Note: The information in the article applies to Windows XP Home Edition as well.Method 2: Follow the steps listed in this article to resolve the problem: -
I can get MyTExasBenefits, but the screen is translucent or Milky. It says I'm connected, but I can't type anything or get further. Can help you. The Texas tech benefits says he can be blocked by popup.
Hi Patti Perfect,
Thanks for posting your question in the Microsoft Community.
It appears from the information that you are facing a problem to connect to the YourTexasBenefits Web site.
It would be useful that you can answer these questions to help you further.
1. what web browser do you use?
2. What is the complete message that you receive when you try to connect?
3. are you able to connect to other sites without any problem?
4. have you made a recent software or hardware changes to the system?
If you are faced with the question when you use Internet Explorer, then you can try the following steps and check if it helps.
Method 1:
If the problem is related to the pop-up, you can disable the pop-up blocker and check if it helps.
To configure the blocker from Internet Options, follow these steps:
a. open Internet Explorer.
b. on the Tools menu, click Internet Options.
c. click on the Privacy tab, then uncheck block jump - rises to disable the blocker.
d. click apply and ok.
For more information, see the article:
Internet Explorer Pop - Up Blocker: frequently asked questions
Method 2:
If the only problem with this site, you can try to use the compatibility view and check if it helps.
Why some sites Web not displayed correctly in Internet Explorer?
Hope the helps of information.
If you need further assistance, please answer and we will be happy to help you.
-
I've applied the suggested fixes but still get popstate records
I deleted the foldertree.json and panacea.dat files, deleted all the files of popstat but still get records showing in my tree. This just started two days ago. I returned the Thunderbird folder and the foldertree.json and panacea.dat have been recreated. What gives?
Maybe this information will help you:
- http://kb.mozillazine.org/Popstate.dat - stores the settings, not folders
- http://KB.mozillazine.org/Phantom_folders
- http://KB.mozillazine.org/Files_and_folders_in_the_profile_-_Thunderbird
If you don't like the appearance of the folder of images, you can try a complete theme.
-
My computer says I am connected but my internet says cannot display this Web page
Vista connection problem
I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites
Hello, Scottyookiss00,
Launch IE without Add-ons
Start > type Internet Explorer
Select Internet Explorer (No Add-ons)
You are able to access the site now?
If so, reactivate the modules one by one to determine the origin of the problem.
Try the steps here:
-
tried to reinstall the application, but still get error code d3dx9_36.dll
Install the latest DirectX Runtime:
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0cef8180-e94a-4F56-b157-5ab8109cb4f5
This will install the missing DLL.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Alarm began some time ago. Enter laptop makes at startup, ok. Internal battery changed but still gets the same alarm.
Battery type CR2032. Ran that test battery had failed Id 6C757T-5417NN-XD003G-C0BX03 primary SCHOOL.
Bought the dv6 2010.
Hello
First error 601 internal battery is not for the RTC battery, it's for the main battery. You need to perform a test, if you need to replace the main battery.
http://support.HP.com/au-en/document/c00821536
Kind regards.
-
How to avoid the visual studio project to be added to the list of recent but still get solutions
When adding projects to a solution in visual studio, the project also gets added recent projects and Solutions list
How ever I never open the project in the recent list so, indeed, it's cluttering up the list of these latest solutions so I would avoid getting projects added to the list of these last, but couldn't find a way to do
Edit:
Proposed by question to:
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Cannot access Internet. It says I'm connected but will not display web pages.
Original title: web no
Unable to connect to the web says I'm connected but does not display pages
Hello
I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.
Why can't I connect to the internet?
http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet
Why can't connect me to a network?
http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network
If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.
How to do a clean boot mode
http://support.Microsoft.com/kb/929135
Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.
Thank you
Legaede
-
I'm trying to convert pdf to word, he says no internet connection, but I am connected. All ideas
Please see the answer in the following thread.
Sorry for the inconvenience.
-
I canceled my account but still get charged!
On May 3, I cancelled my CC - confirmed - but still get charged.
Kamiel salvation,
Please reach out to support call/chat for claim status and return to cancellation.
Kind regards
Sheena
-
I'm trying to timestamp (RFC 3161) a pdf file using my own timestamp server equipment but still get an error: 'Invalid certificate for use' (text Original - certificado valido para uso e nao pt_BR:O). How can I get more information on what I'm missing or whats wrong with the certificate?
I found the answer to my problem: it was linked to the plug of the TSA and its attribute 'Extended Key use '.
In any case, thanks for your help. Just to answer the questions:
Version: Adobe Reader XI
Tried both:
(A) the time stamp for the signature: signature put under without timestamp and an alert
(B) the document timestamp: no changes and an alert
-
RALink 802.11n Wireless Adapter - connects at startup but the dsiconnects after a few minutes
Hello
I have a HP Pavillion DV6-3125SA and just reinstalled Windows 7 Home Prem after installing a new hard drive. Initially everything (including the wireless adapter) had been working perfectly, and then after the last round of updates (as you know that get you about 1 million of updates on the re - install) my wireless adapter started to misbehave. He started sporadically disconnect and reconnect, but now it gets disconnected and remains disconnected. It still works fine at startup. I checked that the driver software is updated, more I also uninstalled and let it automatically re - install. An interesting point to note, is that when I linked to go in Device Manager to disable (and re-enable), Device Manager freezes and unresponsive.
Someone at - it had a similar problem or know a solution?
Thanks for your help.
Megan
Its a cell phone, right?
Run windows Update >... settings disable the updates recommended leaving ONLY the important updates for automatic installation.
Visit the HP support, specific to your model, and then reinstall the chipset and wireless driver
See if that helps
-
Equium P200-1IR - wireless is connected but cannot access the internet
Hi there,
Need a little help!
I just bought an Equium P200 1IR.
I activated the wi fi.
I see my router which is Talk Talk.
Can I get the laptop to connect to the router and it says I'm connected,
However I can't access the internet.I tried the same process by inserting a WiFi dongle into the USB port
on the laptop, and exactly the same thing happens.
We have other home computers that connect to the router and the internet
OK using the wireless dongle.
I plugged a rigid cable between the laptop and the router connection and I can't
access the internet immediately without any problem, however, would be delighted
to use the wireless function.Any help really appreciated... Thank you
Waynec
Hello
Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.
Maybe you are looking for
-
Error in partition and data loss
While trying to partition my disk of 120 GB, that an error has occurred and my mac restarted and said, there was a mistake. Once it restarted, it showed that my drive is now 80 GB and 120 GB not and the other partition is not found.
-
HP Officejet 5610: Problem with cartridges
At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (O
-
I have the error 0x0000008e (0xc0000005 0x833de487 0xb8bff73c 0x00000000) with blue screen
Please help me with this...
-
Wireless connectivity after you install a new LAN modem.
Installed new DSL modem/wireless router. Using WPA2-AES security for the wireless. All new wl in my local network components reacted very well. 2 units of wl, Sony VAIO TR3 and netbook Acer Aspire One, does not connect to the network. Both use XP svc
-
Photosmart 6510: Printer not found the new router
Hello The Photosmart 6510 says that it is connected to the network of law with a beep sound intense, works with a usb cable and print a test without error page. BUT nothing comes out when I try to print something with wifi. It remains in the queue. P