SBS 2011 VSS errors - Spfarm keeps recreating

Similar Questions

• Server standard SBS 2011 when adding computers to domain 404 file or directory not found error

  I settup a SBS 2011 standard on the DHCP server running on the domain server because we use the router to distribute ip to the clients. When I try to add computers to the domain, I get an error (404 file or directory not found) on the client side. I gave the ip of the DNS client-side still the same error to come... but I can connect on the client side to the server by using the name of the server or ip address... If anyone can help on this...

  Please post your question to the Technet forums: http://social.technet.microsoft.com/Forums/en-us/categories/

• SBS 2011 Bootmgr missing

  I have a Dell T110 II with SBS 2011 Server installed. I get an error message Bootmgr missing

  When I boot to the installation media and select Repair, the repair goes directly to recreate the Image on your computer and does not give me the options described in https://support.microsoft.com/en-us/kb/2501318

  I have a backup, but would rather just repair the bootmgr but I can't go to the repair of the tools on the installation media

  Thanks for any help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 - delete shadow copies directories and cannot get the backup to work

  Help, please...
  I just installed SBS 2011.
  When I saw the low disk space getting I profiled in the directory structure and noted that most of the space was taken by windows.oldxxx directories. So I deleted one.
  But it was a bad idea. Then I realized what I did and used the vssadmin console to delete shadow copies etc. and even disable the shadow and recreate them via the computer, shared management gui.

  But now, backups fail to complete... shadow copy operation failed with error Ox800423f0.
  In a bit of panic, I deleted the rest hoping he would rebuild itself... no luck.
  I don't really know what to do.

  Is there a way to start everything again.

  Please... Please, I'd really appreciate a solid direction.

  Thank you

  Hello cvcnow,

  I would suggest trying to perform a restore of the system, prior to installation of SBC 2011.  I do not know what operating system you use, but included some links for Vista and Windows 7.  If you are running Windows XP, please let us know what version and service pack.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• SBS 2011 drivers needed

  Pavilion P7-1410 supplied with Windows 8 OS; installation of Small Business Server 2011. Installation fails due to lack of drivers (e.g., network, Ethernet, USB). Download driver HP account Windopws 8 drivers. How can I get the necessary drivers for SBS?

  I saved the Win 8 drivers before reformat the drive, but they do not work for SBS.

  Hello:

  Unfortunately, I don't think that you will find the drivers for this operating system - even from the mfr websites.

  I just checked the Realtek Web site for the drivers for the ethernet controller, and there aren't any.

  They have Windows 2008 server, but not 2011.

  Specifications to run SBC 2011, the minimum hardware requirement is a quad core processor, which is not your PC.

  Windows Small Business Server 2011

  Small business doesn't have to limited operation. With Windows Small Business Server (SBS) 2011, you get a complete solution, designed for customers who want to technologies of the company in an all-in-one package that is adapted to the needs of small businesses and priced accordingly. Windows SBS Essentials is the ideal solution for businesses with 25 users or less and Windows SBS 2011 Premium add-on provides a flexible and economic solution for the deployment of additional servers.

  • Get the best first server for your business with SBS 2011 Essentials: Enjoy full support for your small company of 25 or fewer users with this server designed to facilitate connection to the cloud and integrate with local and online services.
  • Protect client and Server data : Easily back up your data on internal or external hard drives.
  • Enter your business safely network: Remote Desktop Web Access allows you to access your network securely.
  • Keep in touch with the support of the mobile device: Work from your Windows Phone 7 or other phone compatible Internet.

• Cannot add computers to an SBS 2011 Standard field; Connect the missing site

  I installed SBS 2011 as a new installation.  Things seem to go well... no error and the system works, works by e-mail.  The problem is that when I try HTTP://connect or https://connect to add a computer to the domain of errors.  When I go in IIS there is no Connect Web site.

  How this site to install without having to reinstall my entire operating system?

  Thank you all in advance for your help and assistance.

  See you soon,.
  Cameron

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Problem connecting to SBS 2011 essential

  Although my laptop connects OK and other laptops, my PC refuses to connect. I looked for answers technical and follow-up procedures, but still no joy. PC is running W7 professional.

  Initially the first attempt failed, and that's where everything went wrong. I changed the names and profile of PC. I ignored error, that say technical notes, but system re - then configure PC to another losing all my configurations for the programs, mail etc. I tried everything I know but still PC does not connect normally. The server shows that my PC is not connected. It's frustrating, because it's day 7 in my attempt to solve this problem.
  Help would be appreciated.

  Hi Ascottgent,

  Any questions about SBS 2011 essentials, please go to the forum here:

  http://social.technet.Microsoft.com/forums/en-us/category/SBSServer

  Thanks for posting your question in the Microsoft answers Forum!

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• Server 2003 - SBS 2011 Migration of problem - remove replication server

  Hello

  I'm trying to migrate a Server 2003 SBS 2011, now I know that this goes against the ideas a bit, but I spoke to microsoft and they inform me that it is possible to do.

  I primarily /forest adprep32.exe prep executing what it breaks down, I got the following error

  asprep was unable to extend the schema

  The controller scheme did not complete a replication cycle after the last restart. The controller of schema must complete at least one replication cycle before the scheme can be extended.

  [USER ACTION]

  Verfity that the schema is it connected to the network and can communicate with the other domain controllers in active directory. use the sites and component services snap-in to replicate between the solid operations master and replication partner at least one. Once replication is successful, run adprep.

  now the question I have is that the server is configured for replication no longer exists, the old man of companys IT supports provider obviously did not remove replication correctly, please could somone advise me on how to remove the replication of this system and confirm that it is the FSMO role holder.

  Thanks for any help in advance guys.

  Lewis

  Please repost your request in one of the most appropriate Windows Server Forums.  Thank you!

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• ESXi hosts SBS 2011, clients lose network via VPN

  Greetings,

  We have an ESXi Server (in a lab environment) who perform a SBS 2011 and a Windows 2003 (Terminal Server).

  We have two locations, connected via a VPN IPSec (2 boxes of ClearOS).

  The ESXi host is located in building r. customers in the construction of an experience no problem at all.

  Customers in the building B often lose connectivity to network share. We also failed when copying data. Do not forget that the servers are located in the building and issues affecting only users in the B building.

  We noticed the event ID 2012 on the VM SBS 2011 event viewer.

  The two buildings are connected to a cable broadband 10 mb / 1 mb ISP.

  NOD32 Antivirus is installed on the two virtual machines

  Any help would be appreciated!

  Thank you

  Fred9777

  Hello

  There are a few things to look out for more such links. The following steps were made on W2K and W2K3, so that they are still applicable for you.

  (1) is the VPN capable to manage the packet being sent by site B MTU size, sometimes the MTU on VPN size must be less than the default value of 1500 set LAN. You can check this scathing your server with a command like

  ping f-l 1500

  If you get a message like "packet needs to be fragmented but DF parameter.

  You will need to reduce the size of the MTU TCP/IP in the client registry. Try to ping the server with a size of 500 bytes and see how it goes.

  (2) setting the server TCP/IP stack

  In the registry HKLM \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, create or modify value DWORD of TcpMaxDataRetransmissions. By default, it is set to 5, but I recommend double this value to 10. The TcpMaxDataRetransmissions value is the number of retransmissions of TCP of a data segment without acknowledgement of receipt on an existing connection. TCP retransmits data segments until they are acknowledged or until the expiry of this value. Basically, when a client does not meet a package from the server, the server will attempt to retransmit the packet until TcpMaxDataRetransmissions many times. By increasing this value, you give the customer more time to answer on the server, which will help improve the flaky connections or connections with latency or higher than normal packet loss.

  HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveInterval and HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime.

  Both entered DWORD.
  KeepAliveInterval determines the interval between retransmissions keep until a response is received. If a response is received, the delay until the next keep alive transmission is again controlled by the value of KeepAliveTime.
  The connection will be broken once the number of retransmissions specified by TcpMaxDataRetransmissions is remained. KeepAliveInterval is set by default at 1000, which is one second.
  KeepAliveTime controls how many times TCP attempts to verify that an idle connection is still intact by sending a living package of the Dungeon. If the remote system is still reachable and running, he will acknowledge receipt of the living transmission to keep. KeepAliveTime is set by default to 7 200 000, or 2 hours.

  I hope this helps.

• Error CRITICAL_STRUCTURE_CORRUPTION keeps on poping up

  Hello

  A blue screen with the error followinfg keeps on poping up on my computer toshiba laptop

  ":( Your PC has encountered a problem and needs to restart. We are only collecting information from erro, and then let's restart for you. "After you have installed Windows 8.1 (it was an upgrade of Windows 8, which worked perfectly).

  It states that if I want to find more information, go online and search for:

  CRITICAL_STRUCTURE_CORRUPTION

  Please help me, this problems keeps coming occasionally.

  Can you please tell us what model of laptop do you have?
  Have you upgraded 8.1 instructions for Toshiba - http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• SBS 2011 OEM installation on a Hyper-V host

  Running SBS 2011 OEM.

  Can we install a HyperV host and install the SBS 2011 on this host as a virtual server?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 no usb drives

  You have learned to be joke me! No direct path to SBS 2011 forums. With confusing like all the getout of here. No wonder that support is pathetic. where is the Server forums GISH?

  It is a forum for specific consumers.

  You will find support for SBS in this TechNet forum: http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• Windows SBS 2011 MS transportation service continues to stop

  Continuous transport of Windows SBS 2011 MS downtime, users cannot send or receive e-mails.

  I renamed the file queues to old but the problem persists. Help, please.

  Joshua,

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer

  Thank you.