Scalability of DMVPN & HSEC license request

Hi guys,.

We have some 3900 router which is currently below s DMVPN acting as a hub router

C3900-SPE250/K9(CISCO3945-CHASSIS)

c3900e-universalk9-mz. Spa. 151 - 4.M4.bin

"Need to notify if must purchase a HSEC license if it goes up to 125 spokes (sites) connection via this 3945 dmVPN router.

Here is the output of the command desired the current settings in the router having the seck9 license.

In searching, I found the following information.

Without the SSEC, the SRI 3945 supports 255 IPSec tunnel. If you add SSEC, it can scale up to 2000 IPSec tunnel.

Now, if you see the IPSec Session lower output: 212 active, max 6399, & number of tunnels max 225 Watch therefore for mentioned above new rays will be HSEC license is requires (because it things IPSEC 2 sessions and active tunnels)

We currently have approximately 110 spokes (sites) connected to the hub router 3945.

Reference:
SSEC-K9 license
http://www3.Cisco.com/c/en/us/products/collateral/routers/3900-Series-integrated-services-routers-ISR/q-and-a-C67-606268.html

http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation...
View details of eli crypto

show crypto isa sa countshow crypto ipsec sa countshow platform cerm-information
-sh crypto eli hardware encryption: ACTIVE number of hardware encryption engines = 1 CryptoEngine embedded VPN Details: State = Active ability: IPPCP, OF THE, 3DES, AES, IPv6, GDOI, FAILCLOSE, HA-Session IPSec: 212 active, 6399 max, 0 failure - sh Active County, ISAKMP Security Association of the its crypto isakmp: 101Standby ISAKMP SA: 0Currently courses of security ISAKMP negotiation: 0 = sh crypto ipsec his SA couIPsec in total : 208, active: 204, overtype: 4, unused: 0, invalid: 0 = #sh Mel-information Crypto Export Restrictions Manager (MEL) information platform: CERM feature: ENABLED - ResourceMaximum LimitAvailable - Tx Bandwidth (in kbps) Bandwidth (in kbps) 8500085000 number of tunnels 225123 Rx 8500085000 number of TLS sessions 10001000 Resource reservation information: D - dynamic - ClientTx BandwidthRx BandwidthTunnels Sessions TLS (in Kbps) (in Kbps)-VOICE 0 0 0 0 IPSEC D D 102 s/o SSLVPN D D 0 s / o statistics information : Tunnels failed: 0 Failed sessions: 0 band bandwidth tx Failed: 0 Failed rx bandwidth: 0 Failed encrypt pkts: 0 Failed decipher pkts: 0 Failed encrypt pkt bytes: 0 Failed decipher pkt bytes: 0 Passed encrypt pkts: Passed 23746321255 decrypt pkts: Passed 20079132018 encrypt pkt bytes: Passed 21892230873508 decrypt pkt bytes: 9815317896176 =.

Yes, I would buy the HSEC license.  With that many rays, I would have suggested you buy anyway, regardless of the number of SA.

Tags: Cisco Security

Similar Questions

  • Verification of Dynamics license request

    Hi all

    I need to meet the demand from the Supplier Portal Server take I do not license key for spurious request generate.

    Is there a way to pass an extra parameter as a password to take 'Vendor Portal for BlackBerry App World' portal provider server could post in the request to tell me that 'it's a valid request

    Can someone help me?

    Thanks in advance.

    Hello mazab,

    Yes, you can do it.  Don't forget, the App World asks you for a URL.  This URL can be anything.  Then. You can have a URL like this:

    http://www.mydynamiclicenseserver.com?source=appworld&price=9.99&someOtherParameter=value

    App World will automatically add the other parameters in the URL.

    Thank you

  • ESA license request

    I have an esa with a 500 user license + cluster (free) licenses, now we brought 2 new sec we have obtained licensing cluster that is free, now, I know that I collect all this e-mail devices, then it wil work and share the licenses to the cluster.

    Now the question is that I want to delete my old DRY with a 500-user license, will have 2 new sec will continue to work after I have remove the old esa of the cluster?

    Hello

    When you cluster ESA/s they do not share license information. You need to import the license keys individually for each device.

    Thank you!

    -Dennis M.

  • license request

    Hi Netpro,

    I wanted to delete a query that, my package ID license has expired in July 2011 and always auto update of

    signatures arrive... showing the signature update to August...

    can u tell me who must have spent badly or well.

    Hello

    you will get the grace period of 30 days from the expiration date to renew your license, after that it won't work.

    that's why you see last updated in August

    It will be useful.

    Thank you

    Suresh.

  • vCenter license request

    Dear team,

    Karim plan to install the new vcenter server software I just want to know we have vcenter server 4 standard license, it will work wil on new server vcenter license 5... Help, please

    concerning

    Mr. VMware

    I mean, you cannot add an esx5 to a vcenter 4, unless you reinstall to v4. But if you upgrade your host to v5, you need to update your license in myvmware.com key.

    Kind regards

    Julien

  • Windows license request

    What are the steps of a license a 5 ESXi host with Windows Server, Enterprise edition or Datacenter Edition.

    Like where we put this license key so that I can create unlimited windows VMS if I bought the Datacenter edition. I'm bit confused about licenses.

    Help, please.

    Ok. u mean every time to create the model that I have to manually assign a license by going to the virtual machine or a virtual machine regardless of clone...

    Yes, each instance of Windows must be allowed. If you can use the same key, you need to turn on the Windows license depends on the type of license that you get (retail, Open, Volume, company...).

    Sorry, but I don't understand the second question. Can you please clarify this?

    André

  • 4 of ESX license request

    Hello

    Recently, I have been trialing 4 ESX and Virtual Center and the trial period expired before I had finished stable. I don't have the characteristics of vCenter to complete the test so I tried to enter a license key for the free version of ESXi on hosts. It worked and I found myself with ESX 4 (service console) running on a free ESXi license key, only the ESXi features were available. It was only a test, but just curious to know if this is supported, running ESX 4 with free ESXi 4 license key.

    It is not supported.  This license for ESXi is only meant to be used for ESXi and ESX.  The fact that it works is not all that surprising, but the EULA should restrict yourself to just ESXi.

    Look in the vSphere Essentials bundles - they are very affordable if you are a beginner with vSphere.

  • Adobe license request

    I installed Flash CS5 and Flash 8 on a single computer to work frequently on two software, therefore, my query is that how much Flash licenses needed for the purchase of me to complain with the purchase of adobe license?

    If I bought a license of Flash CS5, then it is possible to use an older version of the flash software on the same system who have already installed the Flash CS5 license?

    Please suggest!

    Thanks in advance

    If you legally own the older versions, nothing prevents you to use. There is no obligation to remove older versions when comes new, or is that considered an additional license.

    Mylenium

  • A license request getting 3328.1090519055 in Flash Player

    Few details at the moment but wanted to start the question for any quick ideas.

    Certain unknown percentage of events reading report DRM 3328.1090519055 error code.  All content is delivered with the same packing certificate (a certificate of production level).  Succeed the most/many of applications and fine reading.  Currently, it is unclear why this error code is returned.  We cannot find any documentation on this error code.  From what I understand watching others 3328 errors posted in the forums, this group of error has something to do with the failures of certificates?

    Thanks for any help.

    For now, it's look like this is fallout of FP11 as described in this post on the forum: http://forums.adobe.com/message/3924945#3924945

    We tested locally with FP11 and tells me that when our license servers (FAXES 2.0) do not manage the control of v3, as expected, the error code returned of DRM is 3328.1090519055.

    No confirmation elsewhere FP11 would cause this error code?

  • Reader/Acrobat SDK license request

    I'm developing an application in c# and this application displays the PDF document on a form. I have 3 questions as follows.

    A question: I am currently using the axAcroPDF that is exposed in the free software Acrobat Reader. Now, if I deploy my application to my customer, should I make them acquire a license from Adobe for the drive or to use .NET Reader classes?

    Two question: given that the Reader SDK is quite limited, I think using some of the Acrobat SDK classes in my application. In this case, how does the license - do I have my client by an Adobe Acrobat Std or Pro for each PC where my application is running? This means that every copy of Acrobat comes with 1 license for SDK, or can I buy 1 Acrobat and licenses for the SDK, or just buy the SDK separately.

    Third question: the PDF Library SDK license is also related to Acrobat Std or Pro?

    Kindly help with that because I called my dealer and they are not too sure about this. And I tried to look in the forums and I do make a vague idea but wants your confirmation before I inform my client on what to buy.

    Thank you.

    John

    1. No, your users just need to have the reader on your computer.

    2 - Yes, to be able to use the API COM Acrobat your clients must have Acrobat installed (as reader above) on the machines.

    3. No, the license of the PDF library is separate and distinct.  If you want to use PDFL - the license.  And who would then remove the need to #1 and #2.

  • solution VPN Neu, DMVPN

    Hello world

    I'm doing my research about to create new connections between offices in our network.

    My plan is to have with the centres and the rest as the rays.

    There are 35 offices, 12 of which are up to 20 users.

    most of the offices are between 20-200 users

    and only 2 are more than 200 users

    DMVPN is sure how, but I have a request for short.

    What kind of models do you recommend?

    for example, for small offices I think to the Cisco881-Sec-K9

    For hubs, I was thinking about the Cisco 4451 x, how do you think?

    Thanks in advance,

    Thomas

    Here is a comparison between the 4000 series routers.  I think I'd go for the cheapest 4431.  If money is no object to stick with the 4451.

    http://www.Cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-ISR/models-comparison.html

    Make sure you get a HSEC license as well, otherwise flow crypto is severely limited.  I also get the AppX license.

    For the rays, if it were my money, I would like to have the 890 series routers.  They can dish line a circuit of 100 Mbps and come with 'Advanced IP', so that can run BGP, EIGRP, etc..  Almost no restrictions.  A Cisco 897VA is particularly versatile.  Note If you want the grid, you can order a support separately for the 890 series mount rack mount routers.  The 897 a ADSL, VDSL and port WAN Gigabit copper/fiber built in.  It can plug into a lot of WAN circuits as a result.

  • Update license of IPS ASA - SSM

    Hello

    We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

    I would like to know how to upgrade the license.

    We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

    internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

    How to solve this problem or how to do when you use the other option, how to get the license file.

    Best regards

    It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

    If this isn't the issue, you can always apply a license manually. Download your license file here:

    https://Tools.Cisco.com/swift/LicensingUI/home

    and apply via the ASDM or the CLI

    -Bob

  • License of dry and Cisco 2901

    Hi guys,.

    CISCO2901-V/K9 can support IPSec VPN Tunnel or should I order SL-29-SEC-K9 in order to create IPSec?

    Guys do you know where I can find the support of the Cisco router boot feature?

    Thank you for helping me!

    Hello Harry,.

    You can check this:

    Software licenses available on the ISR G2

    C2900 router is a powerful platform, but it requires the license of security for VPN support.

    The SSEC-K9 license removes the reduction applied by the US Government on the encrypted tunnel and encrypted flow export restrictions. SSEC-K9 is available only on the Cisco 2921, 2951 Cisco, Cisco 3925, 3945 Cisco, Cisco 3925th and 3945TH Cisco. With the SSEC-K9 license, the ISR G2 router can go above the limit of the reduction of the maximum of 225 tunnels for IP (IPsec) security and the flow rate of 85 Mbps of one-way traffic in or out the ISR G2 router encrypted, with a total of 170 Mbps bidirectional / s.

    Cisco 1941 and 2901 2911 already have maximum encryption within the limits of export capabilities. The HSEC license requires pre-installed image of the universalk9 and license DRY.

    FL-29-HSEC-K9

    US Export Restriction Compliance license for 2921/2951

    2921 SRI and SRI 2951

    SEC - K9 license

    Ordered with system license

    FL-29-HSEC-K9 =.

    US Export Restriction Compliance license for 2921/2951

    2921 SRI and SRI 2951

    SEC - K9 license

    Paper PAK spare

    L FL-29-HSEC-K9 =

    US Export Restriction Compliance license for 2921/2951

    2921 SRI and SRI 2951

    SEC - K9 license

    PAK electronic alternative

    HTH.

    Update: the previous post included the wrong table.

  • How to complete the form "Adobe Runtimes / reader Distribution License Agreement.

    I just spend some time to talk with Adobe support engineer license that could not solve my problem.

    I intend to distribute Reader and Flash in our windows domain. I don't understand all the technical stuff on the strategies group, installpoints, application of msi MSP etc...

    The issue I'm having is to complete the contract Adobe runtimes distribution /reader license request form.

    https://www.Adobe.com/cfusion/mmForm/index.cfm?name=distribution_form & PV = RDR

    I do not understand what Adobe submit me in the mandatory field labeled "Please indicate the product or service name and description.

    Call me stupid or stubborn, you want to, but I'm reluctant to send this form (and so agree to the license) when I don't fully understand.

    There is no other explanation lies in this form and an engineer support-license-don't know either and this forum was told.

    Who here has already filled out the form and you can help me with my question?

    Also, if someone from Adobe reads this, you can add some tips on the form or short, you support staff on this.

    He wondered about the product or service in which the Adobe software will be 'distributed' - for example if I give a USB to a trade fair for Quahog flanges LLC and include Adobe Reader on it, I type something like "included the flanges of Quahog USB drive, distributed to the general public". In case you might say something like "for distribution within our network of the company only.

  • Error report followed closely by scam phone call.__04 June 2010

    Error followed by phone call report scam. (£79 for a new Microsoft license request). I'm in the United Kingdom.

    June 4, 2010

    I, also, have just received a phone call from scam shortly after the presentation of a microsoft error report. The appellant was Asian, as if the others were and he claimed he was from Microsoft. I had downloaded a rogue file that was causing my computer works more slowly and asked me to click on the Start button and open the "run" command, he said. He asked me to type "eventvwr", this brought an observer called window events. He asked me to click on the app and got my attention to the error and warning symbols in the open list. He then asked me to click on system and see the symbols contained in this list. He then said he would connect on a technician who would correct the mistakes on my computer but my license has expired and I had to buy another before PayPal mistakes could be corrected. He quoted £79 when asked. He would tell me how to send money via Paypal when I told him that I wasn't going to send money to anyone. I said, 'as far as I know, you could be a criminal trying to pull a scam. "Anyone can phone up and say these things."  Oops, I had caught. "YOU CALL ME A CRIMINAL. "Well WELL YOU GO COME AND PASS 200 lbs ON A TECHNINICIAN BLAH, BLAH RANT, rant", and then he slammed the phone down. There, he, he. ****.

     

    Hello

    It seems that you had a telemarketing call or what we call a call of the scam. Do not provide a personal information in your.

    If you are in the United Kingdom and the appellant made an offer to help a royalty payment, you should contact the national fraud authority.  Details are on their website at:http://www.actionfraud.org.uk/

    The NFA has pledged to track down and eliminate these criminals, but they need all the help they can get to identify scams, if they do not speak that they can act.

    If you can at least get a website URL, which could be useful in a report.

    Avoid scams that use the Microsoft name fraudulently

    Cybercriminals often use the names of well-known companies, such as ours, in their scams. They think it will convince you to give them money or your personal information. While they usually use email to deceive you, they sometimes use the phone instead.

    Common scams that use the Microsoft name

    • A person of "Microsoft Support" calls to fix your computer
    • "You have won the Microsoft Lottery"
    • Microsoft "requires credit card information to validate your copy of Windows.
    • "Microsoft" send unsolicited e-mail with attached security updates

     

    Avoid these dangerous hoaxes

    We do not send unsolicited e-mail messages or make phone calls unsolicited request personal or financial information or repair your computer.

    If you receive an unsolicited e-mail or phone call which is supposed to be from Microsoft, and request that you send personal information or click on the links, delete the message or hang up the phone.

    Microsoft has none of the unsolicited telephone calls to help you fix your computer

    In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

    Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

    Treat all unsolicited sceptically telephone calls. Don't provide personal information.

    If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

    If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you've been scammed.

    You did not win the "Microsoft Lottery".

    Microsoft customers are often the target of a scam that uses messages falsely promise money. Victims receive messages saying 'You won the Microsoft Lottery!' There is no Microsoft Lottery. Delete the message.

    If you have lost money to this scam, report it. You can also send the police report to Microsoft, and we will use it to help the security forces to catch criminals who send these e-mail messages.

    To protect yourself against these e-mail hoaxes, you can use the same general orientation you use to protect yourself against phishing scams.

    Microsoft do not ask for credit card information to validate your copy of Windows

    We require that your copy of Windows is legitimate before you can obtain programs from the Microsoft Download Center or receive software updates from Microsoft Update. Our online process that performs this validation is called the Genuine Advantage Program. at no time during the validation process we request your credit card information.

    In fact, we collect any information that can be used to identify you, such as your name, e-mail address or other personal information.

    For more information, read the Microsoft Genuine software privacy statement program.

    To learn more about the program in general, see Genuine Windows: frequently asked questions.

    Microsoft sends no communication unsolicited on security updates

    When we publish information about a security software update or security incident, we send e-mail messages only to subscribers of our security communication program.

    Unfortunately, Cybercriminals have operated this program by sending fake security messages that appear to come from Microsoft. Some messages to attract the recipients to Web sites to download spyware or other malicious software. Others include an attachment that contains a virus. Delete the message. Do not open the attachment.

    Legitimate security communications from Microsoft

    • Legitimate communications do not include software updates as attachments. We never attach software updates to our security communications. On the contrary, we refer customers to our site for more information on the update or the software security incident.
    • Legitimate communications are also on our websites. If we provide information about a security update, you can also find this information on our Web sites.

    concerning

     

    Paul

Maybe you are looking for

  • Missing in iBook purchased content

    Hi, I bought an iBook recently called your brain at work. In part 2 way 3 audio goes silent for 10 minutes. Then he returned. I need to figure out where to report it and how do I get my content? I would add that it is extremely annoying to spend mone

  • Equium A60-692. not all BIOS

    Hi all I just received an A60-692 that wouldn't work, I replaced the HARD drive because it was very noisy, and I had no display at all, now, when I boot with my windows disc I get a flashing bluish screen for one or two seconds then the rest of the s

  • Re: Disk errors (Smart predict failure) on Satellite L650-1PR

    Hello Tonight, I had a problem with my hard drive, or at least that's what my computer is telling me. I got these 2 screens error telling me to save it and contact the manufacturer. http://img692.imageshack.us/img692/6997/harddiskproblemb.jpghttp://i

  • Panel locked on screen

    Hello: I have a Pavilion laptop 6V6 who suddenly has a problem. On the display panel and under my user name, the word "locked" is now present. How can I get rid of him? Thanks in advance for your replies.

  • have photo viewer read gif files

    . GIF files I want that Microsoft updated the photo viewer to read files .gif. It is unacceptable that XP photo viewer can play gif, but Windows 7 can not. Does anyone have a solution or the best method to get this update done?