SCAN DOCUMENTS WITH HP OFFICEJET MULTIPAGE 4620

Similar Questions

• How to scan documents with my hp officejet pro 8600

  could someone tell me please how to scan documents with my hp officejet pro 8600?  Thank you.

  I understand that you want to analyze. I'd take a glance at this document.
  
  Let me know if it helps.

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• How can I print a watermark on my documents with HP OfficeJet 8600?

  Can I print a watermark with HP OfficeJet 8600?

  Hello

  You can install software, not the printer. What software do you use?

  Kind regards.

• Impossible to Document with HP Officejet 6310 all-in-One scanner

  Dear all,

  I have a HP 6310 of all-in-one desktop. My scanner was working fine until I changed my PC running on Windows & Pro. I tried various solutions proposed by the community and the last test has been with HP Print & Scan Doctor 4.3. Follow the instructions on the screen. Also I could hear the ROAR scanner far when the message to display "HP Scanning" window showing on the monitor. The program checked all checks i.e. Device Manager, Scan Driver Check, device status, window (WIA), solution, registry, Scan Flow Manager & Digital Image Monitor HP Center. Only two controls that had yellow Triangles were HP Scanner Twain and Front Panel Test. The HP Twain Scan error message was ' the twain component is used by another process even after a reboot. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest full features software of HP customer service (recommended). Note: You should always be able to scan from applications such as Microsoft Paint. If this will meet your scanning needs, and then click 'Skip '.

  I am not that technica l and would really all members to guide me through the process in order to get scanner work. When I go through the movement of the scanning of a document via the HP Solution Center, I go for the selection process the file type I want the document to be registered as (somewhere e.g. office) but get an error message. I would appreciate help to resolve this matter without spending money to call the telephone helplines HP as currently unemployed. Thanking you in advance.

  Shabbir soso

  Hi Jamieson,

  I just wanted you to know that after following your instructions for uninstalling and doing the clean boot procedure, my scanner works now - thank you.

  Shabbir soso

• scanning documents with multiple pages on 2542 all-in-one

  Therer is a way to scan multiple pages into a single pdf file on an HP 2542 all-in-one printer/scanner

  Hello

  Since your computer open the HP Deskjet 2540 software anc lcik on scan a document or photo.

  Select PDF and make sure the option Show Scan preview is checked.

  Ensure that the scanning resolution is 300 dpi or lower.

  Click Scan in the scan preview, click the button add page, under the overview of digitization, once you have finished click on save or finish to compete with the analytical work.

  Shlomi

• HP pavilion dx and hp officejet 7500 a, vista, how to scan documents to my officejet

  How to scan in my documents?

  Hello bigdog.

  You can find the support page for your printer in this case:
  http://h10025.www1.HP.com/ewfrf/wc/product?product=4083652&LC=en&cc=us&DLC=en&lang=en&cc=us

  I recommend first of all, go to the section software and downloads to ensure that you have installed the latest drivers. Select your operating system and follow the instructions.

  This link is an article tree that shows the different options available for your request:
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=26493&tmp_task=useCategory&cc=us&DLC=en&lang=en&LC=en&product=4083652

  There are different methods in which you can scan with this product, or by using the automatic document feeder or the dumpster to scanning and various software.

  If you have any questions please come back.

• Scanned documents = 0 bytes (OfficeJet Pro 8500 A909g)

  So, I was happy enough to properly set up my network folder.  This excitement is quickly faded.

  Whenever I have analyze something, it is through 0 bytes.  Color b & w PDF, TIFF, PDF, JPEG, still occur.  It is with the scanner documents multi — said passing.

  What could happen?  I certainly papers turned in the correct manner, but even if I have not that would be irrelevant, because a totally white PDF would still have a file size.

  Thanks for your help,

  Brian

  Install the latest firmware has solved the problem of 0 byte file Windows 8 for me.

  Here are the instructions that I followed: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-5&cc=us&dlc=en&lc=en&os=4132&product=4083971&sw_lang=

• Scan/copy with HP Officejet 8600 pro problems

  I have a desktop HP all-in-one running Windows 7 (64-bit). The printer HP Officejet 8600 pro range is connected to the printer via a USB cable. Scanning/copying is all lines verticle edge edge of the paper. I ran the HP scan doctor software and it showed that everything works. Still no usable copy. Search HP site and the forum of solutions. Tried what I found. Still haven't found a solution. I would set an example of a scan, but I see no abilty to attach a copy of this message. Can someone help me solve the problem?

  The scan looks like the following image?

  

  It s probably a power outage in the lamp.

  1. try to change a different electric recessed contact.

  • 

  2. check the scanner lamp, if he shines a light "BOLD" when the printer is turned on.

  • 

  3. try to start a new search and check the operation of the scanner and how works.

  • If the problem persists, this means that the scanner lamp has a hardware failure.
  • To contact directly to Hewlett Packard to ask the repair options available:
  • Contact HP > http://www8.hp.com/us/en/contact-hp/contact.html

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• Two sides of a sheet of printing paper when you print a document with the Officejet K80?

  When my OS is Windows XP my Machine K80 sides of the paper, the printer would automatically print other sides of pages in a document, and then instruct me to remove, round tower and then reinsert the document, press OK and the other sides of the pages would be printed.   With the disappearance of XP and I have to change my OS Windows 7 seems to have lost this facility?   The problem may have been caused by the need to set up another printer with Windows 7 driver?

  I'm sorry.  Unfortunately, given the age of the printer, a downloadable Win7 driver never appeared, leaving the driver in Win7 as the only option.

• Impossible to scan more with my Officejet 6500 E709n

  Hello

  After changing my router WIFI Internet, my printer ALL-IN-ONE cannot be, like a scanner connected to the computer. My Windows 7, 64 bit refuses the HP driver. Printing is still possible after installing a UNIDRIVER on the computer and a manually enter an IP address in the configuration of HP.

  What should I do?

  Thank you in advance for an answer.

  Thank you for your response.

  N ° this method does not resolve the problem. I already tried before asking for help.

  The only method that worked successfully was to REMOVE all files and folders in the TEMP folder, restart the installation, which dates back to the TEMP folder, open the folder, starting with the 7Z, go to UTIL, then CCC letter and run the uninstall_L4.

  Then run Disk Cleanup, download and install the latest version of ADOBE FLASH PLAYER, then go back to the 7Z file and double-click the file SETUP. EXE

  IT WAS MIRACULOUS.

  Best regards

• HP Officejet 6600: How to enlarge the copy of the document with HP Officejet 6600

  Extension of copy

  Hello

  From the #42 manual page:

  To change the settings of copy for a single job
  1. press copy.
  2. Select the copy settings function to modify.
  3. Press Start black or start color.

  Note: From settings you can:

  • Number of copies
  • Copy paper format
  • Type of copy paper
  • Speed of copy or the quality
  • Lighter/Darker settings
  • Originals of resizing to fit on different paper sizes

  Kind regards.

• OfficeJet Pro 8625-impossible to scan documents to PDF format with windows 10

  I have an Officejet Pro 8625 printer.  I can't scan documents to pdf format.  There is no option for pdf and documents scan photos not documents.  After you have installed Windows 10, I got a message to insert the cd of printer provided with the printer.  I have done, but received no other directions.

  Hi @dj53,

  We have the option to save the file scanned in PDF format if we use the HP printer Assistant application (this is part of the HP printer software)

  Please refer to the document URL support

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?