Scan not print at 100% - help!

Similar Questions

• HP LASER JET 4 P DO NOT PRINT WIRELESS LAPTOP, HELP

  BOTH OF MY COMPUTERS ARE DELL AND HAVE VISTA, THE WIRELESS IS AN AT %T MODEM. PRINTER IS CONNECTED BACK TO CALCULATE MAIN VIA A USB-PRINTER PORT WORKS WELL WITH THE BUREAU, WILL NOT WORK WITH THE WIRELESS - OF THE CLUES?

  AT & T AND DSL (BELL - SOUTH) ADVISED me, THAT it IS a PRINTER PROBLEM, I DOWNLOADED a POSSIBLE DRIVER to the laptop. WHAT I GET IS AN ERROR MESSAGE WITH THE LAPTOP.

  NEED HELP? ANY IDEAS? SUGGESTIONS?

  You can disable the caps. No need to yell. You try to share a printer on a network. It must be established as a shared resource on the computer where the printer is connected. Can you share files between the desktop and the laptop on the network?

  Did you all put here to share the printer between two computers?

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Why is my Dell 720 printer does not print anything? Help me please!

  OK, so I'm trying to print basically nothing of importance, but when I click on the Fax icon, it turns the paper into the printer as if it were actually print something, but I only have a blank sheet of paper. Why? I'm not this computer.

  any help would be great, thanks :)

  Why is it you are by clicking on the icon of Fax to print anything? Open a doc, then click on print.

  HTH

  > WT

• Got my photosmart b110a House and it is not printing color? Help.

  Hey I got my printer installation and what not and it doesn't print all colors outside the black, this is a new printer that I did all the normal things, printed report of the print quality 'diagnostic' analysis done through the printer head alignment, went on the media and checked if there is anything that I can do and I was wondering if anyone can help get it you like.

  Hi edward_ormersher & FLOCKY

  You can try to verify that the cartridges are properly ventilated (details here )

  If it does not, then seeing that it is a newly purchased product I would say contact Phone Support immediately.

  Please let me know how you go.

  Kind regards

  Ciara

• Dynamic text will not print - Ahhhh! Help!

  I import a png using an XML file and a text file for the import of text. The image and the text appear fine, but when I PRINT, the two do not arise. I HAVE'VE GOT TO GO LIVE WITH THAT TODAY. It should print! Help, please!

  I found my own answer and thought I should share it with you all. Since I am very surprised that you will use ActionScript to tell the film to allow dynamic text or a dynamic png of files to print. Basically, you add the following lines to each instance of the text dyanmica or a clip. I was alos using a pre-constructed component, so I had to abandon this component an instance name.

  function printpic() {}
  print (this.pic, "bframe");
  }

  I called the printpic function just to stay in alignment with the name of the movie clip instance on the stage who was peak.

  Then, all printed as if it was supposed to.

  D

• Scanning HP MFP 1536, but do not print

  We have a MFP 1536 which will scan & fax, but do not print.  I tried to reinstall using the disc included, but not luck.  I also tried to use the universal print driver for Windows XP 5 PCL and PCL 6.  Still does not print.  Any help is greatly appreciated.

  Try to use the full functionality driver download it install the printer.  It should have the latest drivers and the features of your operating system.  If this does not work, I need to know who manufactured your computer.

  Driver and software of HP LaserJet Full Feature

• Help! Deskjet 3050 1 does not print wireless

  I have a Dell computer, windows Vista and have had my printer for 5 months, working wireless no problem.  All of a sudden it will not work wireless, but will work with a USB key in.  The blue light on the printer wireless is enabled and the IP address appears on the small screen on the printer.  Is it always the case that there is something wrong with the printer itself and I need to return it? I'm not very high on the commands from the computer, but have not done something strange to change anything.  If I try to print something, the printer on my computer icon shows just job in the meantime.  I deleted the work he did not print.  Any help would be appreciated.

  OK, your printer is properly connected to your router.  You don't need the USB cable.  Unplug unit.

  Now, go to start > Control Panel > printers and delete all instances of the printer.  Now let's add the instance of the network printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Printer HP 6700 using Windows 7 do not print

  Small all-in-one has always been "doubtful" with printing but could not print for several weeks. The wireless signal works because it will scan and send the scan of the computer. Diagnosis says it all is ok, but the print job does not appear even in that print... At work it's a compatibility issue with Windows 7

  Hello Spartan_72,

  Welcome to the Forum from HP Support.

  The problem you have with the HP Officejet 6700 not able to scan not printing from windows 7 but is something I'd like to help with.

  First of all I would run you the HP and Dr. Scan printing and I would like to know what the results are. You have any other devices (another computer, iPhone, etc.) which can printer?

  Thank you

• Does not print what is in the preview before printing

  My printer has been to find work without any problem. Then, I had a problem with printing confirmations. Indicated in the overview screen print not print.  Any help to solve the problem would be appreciated.

  Thank you.

  Hi RichardClifton,

  ·         Remember to make changes?

  ·         It happens with the impressions that try you?

  We will check if the following is useful.

  Method 1: Run the next Fixit and see if the problem persists.

  Problems printing and printing errors

  Method 2: Check to see if this article helps you.

  Resources for the resolution of the printer in Windows XP problems

  See also:

  Printer in Windows problems

• DeskJet 2541: brand new HP Deskjet 2541 not printing black

  Just set up our new Deskjet 2541. Impressions color very well, but when I try to print black it prints a blank page.

  Ink estimate shows that the black cartridge is about 75% full. I ran the alignment and vacuuming twice.

  I also tried to do a hard reboot by unplugging for 30 seconds and then plug it in.

  As much as I know there is no problem with black cartridge, its all just not printing.

  Help?

  Edit: I took out and put new and when the alignment page is printed there are 2 red arrows and a warning sign on the bottom half red. Upper half a blue colors only.

  It's working now. No idea of what he did, I turned it off for a whole day and when I restarted the properly printed alignment page and black now works!

• Do not print Officejet 6700 Premium: Magenta, yellow and new cartridges, others do it.

  Replaced all four "setup" in new ink cartridges, they were recognized, show "full ink" on the Panel, but only cyan and black printed, yellow and magenta only. Test print on printer directly report page: same result, cyan and black are OK, yellow and magenta will not print. Any help? Bought these original cartridges again, 933XL.

  Thanks for the link/document showing how to solve my problem. I had already done most of the steps proposed but remained the problem of horizontal white streaks in magenta during Diagnostics.

  I called HP support, this time to connect to a branch in the United States,-(not supported by the 'HP' I had initially called with foreigners, answering the line who tried to get me to buy a service contract).

  HP will send a replacement magenta cartridge and I'll see if that solved the problem. Otherwise, I was told my printer is still within the warranty and will be replaced by another which has been refurbished.

  That will be fine. However, it is always frustrating to pay $42.00 for the new original HP ink cartridges, then half their levels making cleaning head printer and diagnostics on an old printer for 2 months of use.

  BTW: to all those who want a good HP assistance number: 1-800-474-6836 or 1-650-857-1501

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!

• HP Office Jet 6210 8.1 on windows 32-bit will scan but not print.

  Used utility problems and no help.  Works on laptop with 8.1 Windows 64-bit, but not this desktop computer.  Stange scan but it does not print on the desktop.

  Hi zock01,

  Thanks for letting me know.

  I checked on our lab and the generic drivers are listed below for window 8 to add to see if this will allow you to print.

  Go to the start screen, the type (menu tiles) in "Devices and printers", select settings, click devices and printers.
  Click on add a printer in the upper part.

  Select "the printer that I want isn't listed."
  Click on 'add a local printer or network printer with manual settings.

  Click Next.
  Select "use an existing port," select "USB" in the menu drop-down.
  Click Next.
  Select "HP" in the column on the left and on the right, select 'Officejet Pro PCL3 class pilot.'

  You can also try the "HP Photosmart PCL3 class driver" or "HP Deskjet PCL3 class pilot."

  Thank you.

• HP Photosmart 5520: HP Photosmart 5520 suddenly will not print or scan

  Suddenly is no longer able to scan or print on HP Photosmart 5520. With the scan function I use scanning to e-mail, but, after long 'Preparation scanning' on the screen of the printer, the error message "temporarily unavailable.  "Please try again later". With the impression that I use Google Cloud Print (from an Acer Chromebook) and all that happens is that the demand to print everything ends up in a queue of print jobs.  No error message appears on the printer screen. The copy function works fine.  Wireless network printing results are very good.  The printer worked fine for over a year.  Can anyone help?  Thanks in advance.

  Thanks a lot for taking the time to answer.

  It's all very mysterious, but it seems to have corrected itself.  Finally, the 'out of paper' error message appeared yesterday (there were many), I pushed in the paper and things started to print again.  I was also able to rescan.  Not sure if she was no longer a problem of Google or what but we are in service again.

  Thank you very much!

• HP Deskjet 3050 all-in-One - scan wireless; DO NOT print wireless. Just moved.

  Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer.

  Help!  What Miss me?  Thank you!

  Moor_lady wrote: Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer. Help!  What Miss me?  Thank you!

  Hello Moor_lady, if you are using Windows 7, you can try to reset your printer wireless.

  Go to control panel of configuration, devices, and printer and in the menu bar above, select Add a printer in the lower option, select Add a network, wireless or Bluetooth printer.

  There should be another window that shows all available printers to be added. See if your wireless network printer can be found. If so, select this option and continue the process.