SCAN VIP - it is suitable for the ping requests before installing grid infrastructure?

Similar Questions

• Telnet between the 2 nodes before installing RAC 11 GR 2

  Hi Oracle RAC guru,
  
  For the 2 nodes were installed RAC (GR 11, 2) clusterware, they need to be able to telnet each other with port open? and ping scan name must be successful before you install the clusterware software? operating system is Linux x86_64
  
  Thank you!
  
  SC

  Hello

  the VIP and the SCAN IPs aren't yet to the ping requests (let alone telnet).

  One of the main tasks of a cluster should provide these entry points. So they will be available as soon as your IM is running, but not before.

  Make a res stat crsctl - you on your clusters existing and you will see the VIP and VIP SCAN (online) resources. If they don't are not online no VIP don't will be 'plugged' on top of your network cards.
  You can also see the IP address with ifconfig-a on existing clusters. And you will see the difference on your cluster "clean".

  Concerning
  Sebastian

• What type of certificates are not suitable for the signature of the extensions to HTML5?

  It is not clear to me, of the literature exactly what types of certificate are not suitable for the signature of the CC2014 HTML5 extensions.

  I used a Thawte 'Adobe Air' certificate for signing extensions based on Flash. It is now expired. Can I buy the same type and that will work cross-platform for the signature of the extensions to HTML5?

  See http://www.thawte.com/code-signing/content-signing-certificates/adobe-air/index.html

  Thank you

  Hi meeky2,

  Required certificates have not changed for HTML5 extensions, so the same type of certificate that you had before work ('Adobe Air' certificates are very good).

  Note that if you only distribute your HTML5 extension through modules Adobe / Adobe Exchange, then there is no need to use a paid certificate. If you distribute your extension elsewhere, then you should do the same thing as you did with the extensions of the AIR.

  Best regards

  Fraser

• Product key is expired, and now I need the product ID for the service to help install... help?

  Product key is expired, and now I need the product ID for the service to help install... help?

  Hi RUSSELLDUNN270,

  Which product key you are talking about? Is it for any application or Windows XP?

  If you are referring to the product key of Windows XP, you can use the product key update tool Windows that will make changes to your Windows installation to update your product key.

  For more information, please visit this link: update your Windows product key

  Hope the helps of information.

  Please provide us with more information about the issue so that we can help you further.

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• Satellite Pro M70: Should I uninstall the old drivers before installing the new?

  I downloaded the 'INF update utility', the software of the chipset for my Satellite Pro M70 for windows vista, but not sure if I need to uninstall the old driver before installing the new.

  You don't have to uninstall the old.

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium

• virus scan:-"computer on or off, for the scan to take place?

  In Microsoft Security Essentials

  -Run a scan scheduled... ticked,

  Scan type... Full scan... ticked,

  When... Sunday... Checked,

  Around... 02:00... checked,

  Search for the latest viruses... Checked,

  «Start the scheduled scan uniquementlorsque my computer is turned on but not used?.»

  My question is-, run a scan scheduled on my computer on a Sunday at 2.00 AM should the computer be left for this analysis to occur?  Or he access my computer and perform the task when it is off? Enlighten me please

  The computer must be "on".

  Suggest that you consider the following:

  Checklist for installation of Microsoft Security Essentials

• Input string Microsoft Fix It wasn't in a format suitable for the printer repair

  I have download Microsoft Fix It and when he goes to check the printer indicates the input string was not in a correct format, alos get an out of memory message when you try to print.

  Hello

  1 could you give the exact and complete error message?
  2. What is the number of brand and model of your printer?
  3. from what link you are running the fix it?
  4. of what program/application you want to print?

  Method 1.
  We start by execution of troubleshooting of the printer and check if it finds problems. Refer to the article below for the procedure.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2.
  Also, try the methods listed in the article below, in particular under sectionto restart the print spooler service.
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What processor chips suitable for the improvement of a Presario V5000

  I have a Presario V5000 that I do updates on. I've increased the RAM to 2 GB, and I think to put in a faster processor. He got a 1.8 GHz AMD Turion 64 ML-32 in it, and I think to pick up a version 2.2 GHz the stalk. It seems that this chip can be had for about $50, but I have a few questions I could not find the answers to.

  1. the service V5000 guide lists the numbers of two HP for the Mobile Turion 64 ML-40 (430499-001 393579-001), but it does not explain what the difference is between the two. I googled the two part numbers, but I was not able to know what is the difference between the two, as appropriate. I also turned a number of part of AMD (TMDML40BKX5LD) for the ML-40, but I don't know if all ML-40 with this part number will work correctly in the V5000 or if it should be a part of HP.

  2. the increase in performance to the faster processor may be quite sensitive to value money, or should I just leave well enough alone?

  It is not likely to be very visible and will not turn the laptop in a modern machine, but will give some improvement. My threshold is 10% and this is a jump of 20 percent in clock speed. All the ML-40 should be the same. Why HP has two numbers, I don't know. It is not an HP processor special is an AMD and a 40 ML of another brand of laptop should work. The V5000 is relatively easy to open up... thicker than current models and more room in there for a processor swap is not too difficult, because things happen.

• How Long it take for the recovery disk to install?

  I have the original recovery disc for my Toshiba M55-S139 laptop. I've never used up yeserday. Well its been 17 hrs and nothing! Is this normal? When I put the cd in, it seems, to copy files, etc., so he asks that I remove the disk and press any key to start the process.

  Then it goes to a black screen. I have searched online to find a process step by step as to what I should see or at least a period of how long it might take. I think that 17 hours is too long..but I'm not the expert in computer science here! :)

  Help!

  I agree with Feliks seems the recovery process may not complete successfully.
  I think that you must repeat this procedure once more. Boot from the disc, format the HARD drive and install the new.

  Good luck

• Can I clean the hard drive before installing Windows Dell & as I've heard doesent clean properly. And how to clean the drive of DART?

  Can I clean hard drive before installing Dell Windows 7 / as I have heard it is not clean everything properly. So how to clean the hard drive?

  Or can I restore my office before you install Windows 7 in the first place when it's new?

  Kind regards

  Bert Pooler

  Yes, you can restore the State as it was when new...

  Your computer is equipped with a recovery instead of disk partition...

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery discs...

  After the reset, you should get all the updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

• Prepare the Linux environment before installing EMP 11.1.2.4

  Hi all

  Could someone please help with Red Hat Linux environment preparation steps before installing the EMP 11.1.2.4

  I would like to know the list of RPMS to install and environmental variables to add changes in the settings of operating system files.

  Thank you

  Kalyan

  The following support document will give you an idea - prepare a server Oracle Enterprise Linux 5 U9 for Enterprise Performance Management 11.1.2.3 Installation in VirtualBox 4.2.10 + (Doc ID 1543714.1)

  You can also see the use of the GDR - Enterprise Performance Management 11.1.2 Server GDR Preinstall Health Check (HCVE) [video] (Doc ID 1491179.1)

  See also this post from Oracle support community - https://community.oracle.com/message/12241670

  See you soon

  John

• Uninstall the Muse beta before installing the CS6

  I just got connected to the creative Cloud and want to install several applications. Should I uninstall Muse beta before installing it via Creative Cloud?

  Muse has been uninstall before installing the new version via CC. Everything works very well. I opened the Muse, made changes and uploaded to the catalyst for business with no problems.

  Thank you.

• ORA-12547 TNS LOST during the 12 c dbca on grid infrastructure.

  Hi all

  In my test environment, I installed the 12.1.0.1 9 VMware and REDHAT 6.4grid infrastructure. After a successful installation of the grid infrastructure and database binary when I try to create the database with dbca, show me ORA-12547 TNS LOST.

  Installation is 2 node grid infrastucture ASM on shared disk. Using binary grid and oracle grid and database users respectively.

  I searched forum and METALINK also, I got a part the documents below.

  1. doc ID 1069517.1 : it says to check the permissions on the files binary oracle as below. I thought it was ok.
  

     - rwsr-s - x 1 184286251 9 August 16:25 /home/oracle/app/oracle/product/11.2/db/bin/oracle asmadmin oracle

  
  

  2 many docs suggested to check libaio-*. rpm. I found that libaio x86_64 RPM is installed but libaio i686 rpms were missing. I installed them also.

  
  

  But still, I get the error.

  Please suggest.

  Kind regards

  Ashutosh Khare

  After the installation of i686 libaio RPM, I also installed each package contained in the document.

  After the installation of the packages reissue the binary grid with document below.

  How to re-bind the Oracle Grid Infrastructure independent (reboot) Installation or Installation Oracle Grid Infrastructure RAC/Cluster (11.2 or 12 c). (Doc ID 1536057.1)

  After the restoration of the links of the binaries of the grid, I relinked binaries and oracle, but dbca database did not work then also. Then I uninstalled the binary oracle and reinstalled.

  The dbca run fine now... Happiness after frustrating 24 hrs.