ScanJet 3000 Pro s2: Scanjet 3000 Pro s2 - support for linux

Similar Questions

• Satellite Pro P100 - support for 4 GB of RAM in Win7 64 and Intel Virtualization

  Hello to the members of the forum,

  I have the Satellite Pro P100 (PSPAHE - 002001GR) and I installed the WIN 7 Enterprise 64 free trial. I have Modules of memory 2 x 2 GB Corsair, a T7400 processor and Bios version 4.7. Everything works fine without their memory. Known BIOS all 4 GB, Windows see it uses but only 3 GB. I know im not alone with this problem, but I have not found a solution to solve it. In msconfig, all right, there's max, and the number of processors. RAM not activated.

  If someone knows a way to work to use all 4 GB of installed Ram?

  I would be much obliged if anyone can help.

  Something else. Intel VT - X is not enabled by BIOS. Also, there is no option to do this. When I bought the laptop it is a feature that I want to use, and now the BIOS does not support it. Why didn't pay much for the laptop so characteristic specific card do not work propably?

  Thanks to everyone for reading my post and want to help.

  SOFC

  Hello

  Perhaps than that you seem stupid now, but I think that this model laptop was never supported for 64-bit operating systems, and I think the BIOS is also not designed for this.
  If you wish, you can call Toshiba nearest service and ask for help. They have access to the database of Toshiba and they can check it for you.

• What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

  What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

  El Capitan is the only one to use, clean the shit of your Mac first and if you have less than 4G of Ram, increase to 4 or more

• Satellite Pro U200 supports PCMCIA cards?

  Hello

  does anyone know if the PCMCIA, for example of Netgear WG511T card will work on Toshiba Satellite PRO U200?
  This laptop seems to have a PCMCIA slot.
  I know, I already have a wireless network card installed on this laptop, but this card is not supported by linux.

  Kind regards
  CC

  Hello

  Yes, the machine supports a PCMCIA connector on the left side of the machine. So, you will be able to put this wireless card in your machine in order to use it under Linux.

  Welcome them

• WEBCAM HP HD 3100 want support for windows 8 pro camera app

  Hi, this is first time I write a post, because I am not able to find any support for my HP WEBCAM HD 3100 for windows 8 pro , with windows 8 I have a camera app name , and what problem I face is that whenever I want to use my webcam with this application, the error message has just been not detect camera , I went for the support of the windows forum 8, they said to refer to the manufacture for driver problem, and there is not the issue, that the software HP HD 3100 driver installation is ARCHSOFT and ARCSOFT I VISION which I had already installed on my PC, the webcam works perfectly with other services webcam chat webcam with another application , Its just that it does not work with the individual CAMERA app.

  Please tell me what I can do to remove this problem with the camera application.

  Respect of

  Amit

  Yes, it is compatible with Windows 8.1 since it works in my laptop even without installing the supplied software suite. I had to install it for Win XP but win 8 pilots inside to operate the camera. Try it on a different usb port. Remove and uninstall the software from the Control Panel programs and do a system restart. Let the appliance must be installed by windows with it is in built drivers. This would remove any incompatibility between Windows and drivers you have installed.

• Sat Pro 6100: firmwareupdate for wireless CardBus TI 1410 Lucent ORiNOCO

  Hello

  my laptop is a Toshiba Satellite Pro 6100
  with this wlan card: Wireless: TI 1410 CardBus / Lucent ORiNOCO
  and this firmware:

  Eth1: Material identity 0005:0004:0005:0000
  Eth1: Station identity 001f:0001:0008:000 has
  Eth1: Firmware identified as Lucent/Agere 8.10

  The problem is that the drivers will not work with this firmware.

  eth1: Lucent/Agere firmware does not support manual roaming

  Now, I am looking for a firmware update for this card (I think 8.72 should be the current). The update should work on linux or (if not available for linux) on windows.
  Kind regards.
  Can someone help me that my wlan Runic card with Linux?
  Rico

  Kernel:
  2.6.14 - gentoo-R5

  Hello

  As far as I know that the wireless LAN card is optional on East Unit.
  You upgrade the unit with the wireless network card?
  Well, I put t know you what WLan card, but these cards are compatible

  Wireless LAN Mini PCI Card (2, 4 GHz, 802. 11a / b) PA3236U-1MPC
  Wireless LAN Mini PCI Card (802.11a/b/g) PA3298U-1MPC
  Wireless LAN Mini PCI Card (802. 11 b / g) PA3300U-1MPC

  The drivers for these cards, you will find on the page Web of Toshiba or the Intel Web site. In my opinion, if you use a good card and driver so that all should work properly.

  Good bye

• My MAC Book Pro does support Wi-Fi 5 GHz?

  Dear,

  I need your help. I'll try to find the WiFi 5 GHz, but it does not appear in my Mac Book Pro while other computers and my Iphone 6s can and works perfectly. I don't know whether or not my Mac Book Pro supports 5 GHz. I would be grateful if someone could help me. Here are the details of my Mac Book Pro.

  MacBook Pro (13-inch, mid-2012)

  2.9 GHz of Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  Card type: AirPort Extreme (0x14E4, 0xF5)

  Firmware version: Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  MAC address:

  Locale: ETSI

  Country code: QA

  Supported PHY modes: 802.11 a/b/g/n

  The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 149, 153, 157, 161, 165

  Wake On Wireless: support

  AirDrop: support

  Status: connected

  Million thanks in advance!

  The simple answer is no.

  DISPLAY
  Built-in display	13.3 inch (visible diagonal) backlit by bright panoramic LED
  Resolutions	1280 x 800 (native), 1152 x 720, 1024 x 640 and 800 x 500 pixels at 16:10 aspect ratio x. 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 format; 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 extended format; 720 x 480 pixels at 3:2 format. 720 x 480 pixels at 3:2 format stretched
  GRAPHICS
  Graphics card	Graphics Intel HD 4000
  Graphics memory	Up to 1 GB of DDR3 SDRAM shared with main memory
  Connection of the screen	Digital video output Thunderbolt
  Display stand	Support for up to two screens Thunderbolt
  Display modes	Dual extended display, copy video and AirPlay Mirroring
  External resolution	Up to 2560 x 1600 pixels

• Satellite C50T-A382 - updated to Win 8.1 Pro & touchscreen support

  Dear all

  I am currently the owner of Toshiba Satellite C50T-A382 machine which has preinstalled Windows 8.1 edition in plain language.

  I now want to upgrade to Windows 8.1 Pro Edition, however I'm worried if updated to Win 8.1 Pro, it will support not my touch screen, because I read many comments on the Internet about other brands, like H.P., happens, etc. where users have upgraded to Windows Pro Win SL 8.1 8.1 and their support of the touchscreen is so more than work.

  Very would be grateful if someone could inform if it would still technically support my support for touch screen or not?

  Thank you.

  Concerning
  Tan

  I put t see serious reasons why the touch screen is not working after these updates.
  The driver that controls the touchscreen part of Windows 8.1 System. It s not supplied by the factory for laptop (Toshiba, etc.), but it of a Microsoft driver.

  However, in most laptop cases factory provides own systems preconfigured and tested, including all drivers and additional software. All other systems, own hand are not supported by device manufacturers.

  What does that mean?
  This means that in the case of certain problems (after the installation of another system) you will be always asked to test the device original system preinstalled and preconfigured.

• 8100 pro wireless installation with Linux computer

  I use the Pro 8100 with a Linux computer via the USB port. Is there some way to make use of the connection of wirelsss printer so that I can print from an Android Tablet? The manual lists only methods for Windows and Mac.

  Hey IanSinclair,

  I see that you have an Officejet Pro 8100 and you want to connect to a wireless network without the help of the USB-wireless software that is available on Windows and Mac.  I have a guide that shows how to connect a USB-wireless printer without a PC.  Please click here to access this information.

  Basically:

  • Turn it on off and then on the printer wireless
  • This will make the printer stream a configuration connection
  • Connect with the Android phone
  • Go to the SAP of the printer (192.168.223.1)
  • Select the network tab
  • Run the Wireless Setup Wizard in the built-in Web server to connect the printer to your wireless home network
  • After that, you can reconnect the Android device to your wireless network

  If you need help with this problem let me know!

  Jason

• 8600 pro Plus scanning for paper A4 on Mac

  8600 pro Plus scanning for paper A4 on Mac

  I'm unable to scan A4 paper on my device of 8600 by using the HP scanning Application. I have validated that I use the latest software/firmware.

  I can print on A4 paper just can't sweep.  Any help would be appreciated.

  Hi TLC20,

  Thank you for your answer! I was wondering if you are able to copy with A4 paper.

  In the meantime, try the following:

  Load A4 paper on the ADF clash.

  On a Mac, click the Apple icon, click System Preferences, click Print & Scan, select your printer in the list, click the scanning tab, then click on open Scanner.

  Make sure that the document feeder is selected not to dish. Then change the format of A4 paper.

  Hope this helps you and have a great day!

• Can the ipad pro be used for things like making project or a home school work?

  can the ipad pro be used for school of the thing (example: make the projects or homework)

  I do not have the ipad pro but I want but im trying to find something that can help the school things and when im not doing anything school i can have

  Something to entertain me.

  but my big question is can the ipad pro et for these things? (entertainment and school thing)

  You should ask your classmates what their experiences have been.

  Many schools use iPads.

  Check in the iPad app store for applications you need.  Microsoft office is available for the ipad.  It's a lean down.

  The education of web sites use flash.  The ipad does not support flash directly.  The substitution may not give you 100% flash.

  Flash on the iPad and iPhone

  Atlantic Puffin

  "Puffin Web browser is a wicked fast Browser Mobile Flash. Once users experience the exciting Puffin regular mobile Internet speed will be like torture. "Puffin Free is the free version of the family of puffins and supports Adobe Flash on cloud 'off-peak' from 08:00 to 16:00 (subject to change without notice).

  Free:

  https://iTunes.Apple.com/us/app/Puffin-Web-browser-free/id472937654?Mt=8

  Paid:

  https://iTunes.Apple.com/us/app/Puffin-Web-browser/id406239138?Mt=8

  Photon Flash Player for iPad - Flash Video & games more private Web Browser
  https://iTunes.Apple.com/us/app/photon-Flash-Player-for-iPad/id430200224?Mt=8

  "for iPad java is now a reality! .
  If you are still wondering how to use java for iPad, now you can! With virtual Firefox app, java for iPad browser is possible with a download simple app! Virtual browser for Firefox App opens a wide variety of games and applications - as java for iPad - that you can use for your iPad"
  http://www.virtualfirefox.com/Java-for-iPad

  By Splashtop Inc..
  Flash Video Web Browser - Full Chrome, IE, Firefox, Safari Compatible
  https://iTunes.Apple.com/us/app/Flash-video-Web-browser-full/id431331485?Mt=8

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• HP Officejet Pro 8100 driver for Mac OS 10.9

  I bought a new Macbook Pro with MAC OS 10.9 (mavericks).

  It comes with support for the drivers for the HP 8100, but driver features are very limited compared to my old Macbook pro.

  For example, it does not print in grayscale. Also I have trouble getting access to the HP Solution Center.

  Is there a solution for this?

  Hello

  Please, check the list first then download and install the driver:

  http://support.Apple.com/kb/dl907

  Kind regards.

• HP Officejet Pro 6100 < DRIVER for XP 64 - bit COMPUTER?

  I bought a printer "HP Officejet Pro 6100" (product # 0225085) from Office Depot online, but I don't think that there is a "PRO 6100".   ... but I digress.

  I just wanted you to know background information.

  It seems that the 6100 Officejet does not support 64-bit XP computers.  After talking with HP Technical Support for more than an hour and even if they promised me a work-around, I'm stuck and cannot print.

  I wonder if you can help me find a driver so that I can print from your desktop Dell under XP 64 BIT?

  Q: is there a work around to make it work, or do I have to return the printer?

  FYI old printer - HP Deskjet 6122 - has been directly connected to the XP 64 - bit.   ... but I wonder if if would make a difference if I used the eithernet cable connected directly to the Airport Apple router and tried to print from there.

  THANKS a lot for your help!

  Henry

  Hi Henry,.

  There is no support for operating system XP 64-bit for this printer. You will need to do is install the driver of 990c of the operating system to use this printer for printing basic functionality.

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the updates

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your Officejet 6100 printer using this driver. I would like to know if you have the same problem?

• where to get the hp laserjet 6l pro printer driver for windows 7 32 bit

  where to get the hp laserjet 6l pro printer driver for windows 7 32 bit.

  or if not is there a generic driver that will work for hp laserjet 6l pro printer in a 32-bit windows system 7.

  My Windows 7 Professional 64-bit system has a built-in driver (provided by Microsoft) for HP LaserJet 6 L printer; I guess that the 32-bit edition may also provide a driver.

  Note that the driver can only appeared after the list of drivers in the Add Printer dialog has been updated by clicking the Windows Update button in this dialogue and in the meantime (maybe several minutes) for drivers to download and list to be filled again.