scanned documents, cannot find scanned files?

Similar Questions

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Error message "an error the system cannot find the file specified" when you use Bitlocker

  Original title: Bitlocker to go not accessible by car usb

  Here's the short of it: I decided to use Bitlocker To Go on my USB drive, and while he was to encrypt the drive I plugged a USB DVD - RW drive (it

  s a netbook) and then I got an error message in the Bitlocker program that says "an error the system cannot find the file specified."  I closed the error message and open the Bitlocker Unlock program, put my password and press on unlock and now it only that sit there and spin and the light flashes on my Batman of Seagate HARD drive as it is accessed.  The internal data of the car do not make the same sound, as he did while he was being... just encryption sounds like there are in an infinite loop.  The disc is good and has no errors, and I scanned with SeaTools.  I have a lot of important data on this drive, and I really don't want to lose anything.  Help!

  Hello 5thgear,

  Thank you for the question!

  I'm sorry to know that have problems you with Bitlocker. I get it right you get an error message "an error the system cannot find the file specified" when you run the bitlocker encryption.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Click on the link below.

  http://blogs.technet.com/b/ASKCORE/archive/2010/08/04/issues-resulting-in-BitLocker-recovery-mode-and-their-resolution.aspx

  Answer to us if you are having problems with bitlocker or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot find the file specified on Win 8.1

  I installed the print and scan of the doctor and the other program to help install the printer software.  All I get is "the system cannot find the file specified" when you try to install.  There is no specific file name, so I have no idea where to begin the search, or what to look for.  It's very frustrating.  Help, please.

  Please come back to me

  Try this following guide: during the installation of the printer in Windows 8.1, one Message "system cannot find the specified file" is displayed on the computer

  Have a nice day

• Windows wil lnot open pictures says windows cannot find the file (photos were recorded he said before that)

  Windows will not open photos says windows cannot find the file (photos have been saved he previously said)

  Thank you

  Hello

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Form when you try to open pictures? Is it in Photo Viewer?
  2. What type of files you are trying to open?
  3. You are able to open the photos in the Photos App?
  4. What is the brand and model of the computer?
  5. You did changes to the computer before this problem?

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1: Run the utility to search and index and check.

  a. press the Windows key + X and click on Control Panel.

  b. click on Troubleshooting.

  c. Select display all on the upper left corner.

  d. perform research and solving problems of indexing.

  Method 2: Restart the Windows Search service and check.

  (a) press Windows + R key and type "services.msc" and press ENTER.

  (b) locate the Windows Search service and right-click on it.

  (c) click Properties and check that the start option has been activated.

  Method 3: If the problem persists, I suggest you to run a full scan using the Microsoft Safety Scanner (MSS) to ensure that the computer is virus-free.

  The Microsoft Safety Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional reference:

  Photos app using Windows

  http://Windows.Microsoft.com/en-us/Windows-8/photos-app-FAQ

  Get back to us all the necessary information and the result of the proposed suggestion, we will be happy to help you again.

  Kind regards

• System cannot find specified file hpzmsi01.exe

  Hi all

  My first post.

  I try to install the software from AIO_CDB_Net_Full_Win_WW_130_141 for my HP Office Jet 7310 all-in-one printer.  Model #SDGOB - 0305 - 02.

  I'm running Windows 7 Ultimate.

  The installation runs until I get the message "the system cannot find the file specified."  At the dialog box title "C:\User\Bob'sH... hpzmsi01.e...» "I click 'OK' and I get 'Solution for the Installation of HP Windows 7" error.  The error message is still on the screen.  If I click OK the installation will now recover and restart.

  This isn't the first time I installed my printer, but the first time for this error.  I'll have to let all over again and sign in again on this forum.

  Thanks in advance.

  Respectfully,.

  Hi Shane R.,.

  I'm sorry, but I don't have the chance to try the solution of yoiur.  Well, I'm tired of playing games.  So I made a new clean install.  I allowed the pc find the default «HP Officejet 7310 all-in-One Printer»  After checking that he was printing and scanning, etc, I downloaded the software and it now works fine.

  So is the new pc configuration.

  Thanks in advance.

  Respectfully,.

  Bob

• Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Lately I get the following message if poster every time that someone sends me an email with an attachment. I use to be able to display up to a few weeks before. the message is - Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Does anyone have an idea on how I can display these attachments?

  Thanks for your help.

  Hi fredleon,

  · What is the email client or webmail you are using?

  · What is the attachment file extension?

  · How do you open the attachment?

  · Is it by double-clicking or you choose open with option.

  a. save the attachment to the office,

  b. right-click on the file and select open with the option to open the attachment according to their file extension.

  Example: If the .docx file extension, then it is word document or .pdf, it's Adobe.

  You can get the extension of a file by right clicking on the file and go to properties

  With regard to:

  Samhrutha G S - Microsoft technical support.

• DefaultDomain\wsm - pm.ear (the system cannot find the file specified)

  JDeveloper 11.1.1.1.0 5407
  
  After uninstalling and reinstalling jdev (since he corrupted bike) I'm more able to run all applications. It seems that there are several problems with this setup and I don't know how to fix it. Oracle - is ther a patch or bypass it for it?
  Thank you.
  
  java.io.IOException: C:\Oracle\Middleware3\user_projects\applications\DefaultDomain\wsm-pm.ear (the system cannot find the file specified) with: C:\Oracle\Middleware3\user_projects\applications\DefaultDomain\wsm-pm.ear

  Hello

  I recommend the following:

  1. Uninstall JDeveloper.
  2 remove your Windows system directory is under C:\Documents and Settings\\Application Data\JDeveloper\JDeveloper\system11.1.1.1.33.54.07
  3 - re - install.

  My guess is that after uninstalling it must be a file left on this system directory that affects the following facilities.

  Hope this heps

  -Juan Camilo

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.