scanner Kodak i40 64-bit of Windows 7 will not work

Similar Questions

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• Upcoming games with Windows 7 will not work on Presario SR1020NX. Upgrade Advisor said that W7 would work with the exception of the Aero

  W7 Upgrade Advisor said it would work with the exception of Windows Aero.  When the games to try to come with W7 get window 'game running in software rendering... '. Hardware acceleration disabled or not supported by the video card driver"games will not work. A check says last drivers are installed.  Tried to reinstall WXP in separeat partition to see if would work like that but will not because most recent W7.

  I suggest that you use XP personally gave a computer which is so old.

  If you have a computer with XP (3 + years) and have not changed at least two of these things (CPU, RAM, video card), you should probably stick with XP. Not worth the headache of praying that things work with a material more old which probably is no longer supported on the new OS.
  Usually, people that the computer was shipped with Vista 1, 2 or less it several years ago can be upgraded to 7 without too much trouble if it was a mid-range machine.

  In addition, it seems that Windows is not recognizing your graphics card. It looks like (http://www99.shopping.com/xPO-Hewlett-Packard-SR1020NX-CEL2-8-512-80-COM-XPH) you have an Intel Extreme graphics card. However, nothing about it is extreme. Since it is an extreme Intel card I guess Windows Update should find the drivers for you, but it is not then maybe the video card is just too outdated for 7? I'm not sure.

  Moreover, I wouldn't worry much about the lack of updates for XP right now. If ever you encounter more money then get the new computer with 7 on it, but at this time I suggest you stay on XP if your hardware and software actually works and that is more important than a few features of 7.

• Windows Vista 32-bit Windows Installer will not work. "Windows Installer are not available"

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  extracted from:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Difficulty in registration of Windows Installer

  If the steps above do not help, or if the Windows Installer service is not listed in the Services applet, follow these steps:

  1. Download msiserver.zip and save it to the desktop.
  2. Unzip the file and extract the msiserver.reg on the desktop.
  3. Right click on msiserver.reg and choose Merge.
  4. Click Yes when asked for confirmation.
  5. Restart Windows.

  Here is a tutorial from Microsoft Support. Have you tried this one?

  http://support.Microsoft.com/kb/2642495#top

• Vista Home Premium 64-bit: Side-by-side configuration incorrect, C++ Redistributable is not installed, programs will not install, Windows Update will not work.

  Greetings!  Please read this and thank you in advance for your help.

  A few months ago, I started to receive Windows Update errors, indicating that my Windows platform could not update itself.  Soon after, I started getting errors about C++ Redistributable does not install correctly.  It wasn't a huge problem for a while, and I managed to work around it.  However, my antivirus program is dead, and I'm unable to install a new.  When I try to install programs now, I get the error "side-by-side configuration is incorrect."  I would like to delete the manifest and try to reinstall the application, but I don't know where they are.  At least, it would be a start.  In any case, I am currently without virus protection.  Help!

  So far, I tried to uninstall the Windows updates, but I only managed to install the MS Office updates.  I have even office, although I understand that it is built into the operating system of our days.  I tried many different patches of a lot of different forums and nothing seems to work.  I would like to reinstall the OS, but I bought OEM (from Newegg) and do not have the disc.  I don't even have an easy backup, or even one that I know is 'good'.

  Thanks again for your time and effort.  They are appreciated more than you can imagine.

  -Sean

  Why you didn't say what you did before?

  Borrow a Vista DVD and don't reinstall Option I gave you.

  Or borrow a disc and do a repair installation; It's your call.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 will not work with MP Navigator Ex 2.12

  I have a Canon Scanner LiDE 700F that worked well until a few months after an update from Microsoft.  Now, the program that should be used with the scanner - MP Navigator 2.12 Ex does not work & I get an error message informing them that the program is not responding and will close Windows sends an error report and will advise you if they find a solution.  What I want to know, is there another program I can use with this scanner instead of the Ex MP Navigator 2.12 that Microsoft did not come with a solution?  I am very annoyed with Microsoft and all so-called updates that I receive and then interfere with other equipment or programs already installed.

  Windows 7 OS - LiDE 700F Scanner - Canon MP Navigator Ex 2.12 that came with the scanner.

  You don't say what update.

  MS does not supply the drivers of Canon or software, and if you made the mistake of installing recommended updates is probably where the problem lies.

  Update or reinstall your drivers/software from Canon support, specific to your version of bit of the victory.

  http://www.Canon.co.UK/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_700F.aspx?type=download&page=1

• applications in the start menu of my windows 8 will not work

  Hi all

  My pc has windows 8 and for about 2 weeks now the apps in the start menu do not work, whenever I try to open one of the applications, it shows me a black screen and when I press on the screen, it opens the start again.

  How can I solve this problem?

  Thank you.

  Hello

  See the guide on the following link.

  http://www.eightforums.com/tutorials/21051-apps-tiles-not-working-responding-fix-Windows-8-a.html

  Kind regards

  DP - K

• Windows Installer will not work. I have Norton Antivirus, CCleaner, Securia, etc.. Some programs start more. I have Office 2002 and my processor will not open.

  After problems with my system slows down, I found Windows Installer, stop operation. I have Windows XP Home Edition, SP3. I have Office 2002 and my processor will not open. I tried to install install 4.5, but it wouldn't work.  I can't start in my Services, either, even if it is configured to start automatically. I don't know if I just need to migrate to Windows 7 and do with it or continue to try to solve this problem!

  My hard drive is failing and replaced with the new computer.

• Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"

  I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?

  Hello Nick,

  Here is a link where you can reset windows update components.

  http://go.Microsoft.com/?linkid=9665683

  Download the fix - it and run the fix - it.

  Please select the mode option run aggressive.

  Disable your anti-virus software.

  Restart the computer and verify if you are able to install the updates.

  Kind regards

  Sumanth.B.S

• Why Windows backup will not work on a network share?

  I am running Vista Home Premium and have a drive WD MyBookWorld NAS on a MS LAN.  OneCare used to do all my backups, never had any problem, but OneCare is no more.  I also have a NAS Iomega 2 TB hard drive and the problem is exactly the same for that too - XP and 7 can save on it, Vista can not.

  Windows backup works very well for readers SIN of my XP and 7 machines, but both the Vista, those who refuse.  I can drag and drop files from Vista to NAS, it's just the backup center who is the problem.  When I select the NAS drive for the backup on, he asks a user name and password.  My login to the Vista machine id does not work, and the administrator to the NAS password does not work.  The procedure fails with the 0x800706C6 message.  He refuses also backup on XP or 7 machines (with different messages).  He would be the backup on my other machine to Vista, but I do not have spare storage!
  I have read articles countless and tried to turn on/off control of accounts and mapping changes the network drive, without success - the error message, but does not go far.
  There is an industry on the internet trying to sell people PCHA (what is described as a Microsoft product), but I can't find any help on the Microsoft web site.  It is very bad, when the fault is so common.
  Help, please.  What should I do?

  Hello

  Windows Home Premium backup can't backup on a network location.
  So you will need to use an application of part 3. Professional, comprehensive and Enterprise edition
  backup to a network share.

  You can share files and use the 3rd backup XP to do or use Acronis or other
  party utilities.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find
  and to restore a file as well as many.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  I hope this helps.

• Windows 7 will not work with a hp LaserJet 1300.

  I have a hp LaserJet 1300.  Also, I downloaded and installed Window 7 Home Premium.  They do not work together. Yesterday and today you have listed as available for download a new driver for hp LaserJet 1300.  But it will not download, or at least something is happening which causes the download to say download window failed.  The 1300 is a very popular printer and is still doing a good job now.  When can we expect a reliable driver?
  Zola123

  When you download from? trusted source?

  have you tried to update using Device Manager and update driver?

  Support for HP LaserJet 1300, HP LaserJet 1300n HP LaserJet 1300xi

  http://h10061.www1.hp.com/ccsearch/search?pname=LaserJet+1300&opname=HP+Officejet+J4550+All-in-One+Printer&qry=driver&method=prodFinder&enc=UTF-8&ctry=us&lang=en&dlc=en&sni=3645097&search=0&submit.x=1&submit.y=12 Help others, tell us which solves your problem. Click useful Vote for those who help.

• Windows activation - new hard drive and reinstalled Windows, but will not work with the product key

  Hi all

  My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.

  Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?

  Thank you

  Richard

  Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!

  Thank you

  Richard

• Windows 7 will not work with monitor X2gen

  I have a 19 "monitor X2gen who do not work with windows 7. Windows 7 starts and the screen works until it go to the desktop, then goes out and 'no signal', said the monitor and cable are fine and it works perfectly with xp. PC is new and works well with an old crt monitor and win 7. X2gen bankrupt in 07, so there is no drivers. Can we do anything? I do not buy a new monitor when it works great with XP...

  It starts in SafeMode ok with the X2Gen monitor attached?

  Try to reduce the resolution rate or refresh rate of the video card with the CRT attached and then plug the X2Gen... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Windows Update will not work. Help!

  Is KB2962872, KB2971850, KB2973201, KB2961072, KB2972280, or KB2974008 listed in installed updates (not updated story)?

  What version of definitions appears in the Windows Defender Update tab?

  

  Update Windows 8.1 [KB2919355?]... .temporarily fixed the problem I had until my app Store Windows began to have problems, as well as my graphics card. I tried to fix this new problem since...

  What "new problem" you have now and how it is related to the Windows Update feature?

  1. Yes. All updates are installed.

  2.

  3. I have a update optional KB2967917 that will not be installed.

• The permissions of folder/drive Windows 8 will not work with the Administrators group?

  I read through some of the other questions on the etc folder permissions, but don't really know the answer to this question, or I do not understand what has been the response.

  I did a new install of Windows 8 and have a few records that I stored stuff I now want to use it as well with Windows 8.  As with the other threads, I was getting access denied error etc and have not defined administrators group/full control permissions, but I still couldn't access readers, and my connection is type administrators.

  When I take the disk permissions with my local user rather than to the Administrators group, but, it works very well, even if no one else can access the drives.

  I am confused on how I can make this work for administrators rather than my specific user account, thank you very much!

  If you know that you are a member of the ADMINISTRATORS group, then just browse the classic desktop and open Windows EXPLORER (WINDOWS KEY + E). Right CLICK on the C DRIVE, and then choose PROPERTIES. Click the SECURITY TAB, and then click the entry of ADMINISTRATORS (computername\administrators). Verify that the checkbox under ALLOW checked for each entry. If it not to hit EDIT and tick all the boxes ALLOW. Then click OK and OK. Check the settings for the SYSTEM account.

  If the first step does not work, try this step only. If it does not, click ADVANCED on the SECURITY tab. In the PERMISSIONS tab highlight of ADMINISTRATORS, choose CHANGE PERMISSIONS. Ensure that all are checked in the BASIC PERMISSIONS area. The menu is APPLIES to drop down, make sure it is set on this FOLDER, subfolders and FILES. Click OK, OK, and then APPLY.