scene freezes meter readings

Similar Questions

• ? the best way to test and calibrate a flow using a PCI-6602 meter?

  I don't see.  I want to take an E + H Promag 53 meter readings to a 6602 after a steady flow is reached.  store about 4 values in registers a minute apart.  compare to ESA and get the correction factor.

  So I can read the pulses flow and/or charges.

  in any case, I thought example would be much clearer and therefore I have modified your code shortly. have a look at.

• WMP freezes, playback and time counter freeze and after a few seconds it will start from the point where it stopped.

  Original title: WMP 11 continues to stop audio playback

  I use WMP 11 for months with no reading problems but since yesterday evening he continues to stop for about 20 seconds every five minutes or so. When she did this, WMP freezes - meter reading and time to gel and I get the hourglass - and then after 20 seconds or more, the trail starts from where it stops. What is happening on all the tracks I did not play a single. I tried 20 audio files (mp3 all) through a dozen different albums. In addition, the gap between tracks seem longer than usual. I feel that it is looking for the data and playback stops because the time it takes to find the data is longer than the amount of data he has for playback? Either way, my files are stored on an external drive, and I'm now ask to update WMP for 'monitor folders' once again.

  I also downloaded a new copy of WMP 11 but this has not fixed the problem.

  I ran Fix It from Microsoft, but it has not to report any issue so I'm stumped. Any help appreciated thanks.

  Laptop Dell Inspiron 1300
  Windows XP SP 3
  WMP 11 - updates enabled
  Active Windows updates
  MSE firewall on / updates enabled

  Registry fixers never used because they can damage the file system!

  Thank you, Anoop - I notice that it is 7 - t - it too much work for XP? I'll take a look, although I found closure and restart toured (as far as the burning problem goes). Thanks for your help.

• CTR-500 pulse problem

  I use a couple CTR-500 on a configuration compact fieldpoint to measure the pulses coming from 2 meters of energy (BTU), 3 gas diaphragm meters, 2 liquid flow meters and 2 active energy electric meters.  I seem to have a problem with my account pulse speed up from the beginning to the top of the program (up to 1000 pulses/15 minutes<- which="" is="" unrealistic="" for="" the="" hardware="" installed="" and="" then="" falling="" to="" 5-10="" pulses/15minutes=""><-reasonable value). ="" the="" pulse="" count="" does="" not="" correlate="" with="" the="" manual="" meter="" readings="" i="" have="" taken="" either,="" with="" the="" exception="" of="" the="" watthour="" meters.  i="" am="" unsure="" if="" it is="" my="" program,="" wiring,="" or peripheral="" equipment="" at="" this="">

  Has anyone seen a problem like this before?  I've included a few graphs showing the raw pulse count (saved every 15 minutes) and the change in the count of pulses every 15 minutes.

  Hello, JMC,.

  I need to continue checking your code, but you may have a constant signal, you can test the measures?  Maybe an additional DAQ card to a train of pulses for the exit test?

• Create a counter in AS3

  I am busy building a room type game escape where the user must find 6 items in a room before they can leave the room.  I almost build the room but I want to include a counter that displays the number of items have been found.  So when an element is found at the scene the meter would increase by one until a target when the user would be able to leave the room.  Any ideas how I would code this counter?

  It looks like this:

  itemNum ++;

• Windows dream scene met a fatal error during decoding of the video

  my windows dream scene does not work there is a message that says: "windows dreamscene has encountered a fatal error during decoding of the video". My os is windows vista ultimate. I tried to update and installed the feature with enough space but always has encountered an error. What should I do to recover and use the feature?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  If you have installed on your computer from Roxio, uninstall it and see if the problem is resolved.

  Method 2:

  If this does not work, let us perform clean boot that could help you solve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Freeze a scene?

  It is my first shot using the buttons 'Play' and 'Replay' in Flash that are frequently observed online. I can get the ActionScript button to work, but I do not know how do the Flash remains constantly on the scene with the button until the user clicks on it. I can stretch the amount of time Flash remains on this scene by adding more images, but I can't make it last forever. What ActionScript do I need?

  You may need to add a loop at the end of the sending flash scene towards the beginning of it. Do not refer to name the scene, the first image of the label and when you reach the last image of the scene send the timeline to the first frame of the scene (the call on the label name).

  example: stage 2 1 - label name "beg-scn-1.

  at the end of the scene in a keyframe with this code:
  gotoAndPlay("beg-scn-1");

  This will make a loop the scene up to what the user clicks on a button with the staging of the movie code to move to another place.

• DAQmx Timing of the meter and analog readings

  
  

  Hey all,.

  Quick update. I hung a second function generator to a PFI port on my DAQ and did a sample clock for each channel (IA and CI) type, then did two clocks to the same port. Bingo, I have the same number of samples in each column, and the data looks correct.

  If the lesson learned: you can use the same external clock, but not the same clock for different channel types. Tip.

  -Lyric

• Freezes, accused on the internet

  Still no cure for this problem!

  iMac OSX El Capitan 10.11.6 version 2.7 GHz Intel Core i5. 8 GB 1600 MHz DDr3.

  If previously posted gel unresolved issue.

  While on the internet (Safari + Chrome) internet freezes for up to 2/3 minutes and then works normally for a few minutes before freezing again.  If I'm on the internet then I can't drag the icons/folders on desktop.  If it isn't on the internet by dragging the icons is fine.

  I ran the malwarebytes for mac software - that locate malware genieo which he deleted.  However after restart the iMac still freezes when it is on the internet.

  I also did the disk utility repair disk on Macintosh HD.  Yet once after restarting the gel still problem occurs.

  If I restart the iMac in safe mode, the problem occurs.

  Finally, I did a reinstall of El Capitan as suggested on this site.

  Any other suggestions please?

  Hello rasjjr,

  Thank you for using communities of Apple Support. It is my understanding that you met Frost while on the internet. You did a great job trying to get this resolved. I'm happy to help you.

  Because the problem didn't occur in safe mode, it is possible to connect the elements could be a problem. Please follow the steps below to test your login items:

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  Have a wonderful day!

• How to fix streaming videos that freeze at a certain time?

  Well, when I load a streaming video on streaming sites (not live), they play the intro and when it gets to a certain stamp(4:12) of time it freezes on this scene, and when I try to advance the time, so it does not freeze on this scene, it freezes again on that even if the time stamp said 04:30 and his game dialogue different from when it froze.

  This looks like a problem with buffering because of the Wi - Fi connection. What is the connection?

• Satellite L300-1DI screen keeps freezing

  This isn't the first problem iv met before with this laptop and in each case, I had to restore to factory, removing everything. The problem I have now is that the screen of the laptop freezes after about ten-fifteen minutes from start-up. If im watching a video, the sound will still play, but not the image.
  Anyone know what the underlying problem and if there is a way to overcome this problem?
  Thank you
  mast

  Hi Matt

  It is not easy to say why this is happening. Maybe you should explain the problem with more details.
  What kind of videos you're watching (DVD, avi, mpg movies)?
  Which player do you use?
  This happens on the same format of video?

  Have you tested on different actors?
  What did you do to find out why this happens?

• Satellite L70 - B - Touchpad pointer freezing after upgrade to win 10

  After the upgrade to Windows 10, I get a problem intermittent freezing pointer touchpad.

  It emerges after a few seconds or by pressing the function Fn + 5 button, but it's not permanent cure.

  I downloaded all the patches available etc., but the problem persists. Did someone met a similar problem after W10 upgraded?

  Laptop: L70 - B Satellite
  GordonH

  Does always if you uninstall / remove the software/driver for the touchpad of programs & features?

• Satellite A350D-110 freezes on splashscreen

  I have a 110 A350D, somewhere bought in February of this year. It runs Vista Home Premium 32 bit. Until recently, the laptop behaved very, very well. There was the occasional "hiccup" on some games or applications more demanding, but other that that, I felt that I spent a good part of the cash in the right way.

  Less than a week ago, I was doing some night navigation, patching up a project and so on. Windows Update asked me to install updates, so driven by the routine that he never hurt before, I accepted the downloads and updates. But since I had work to do, I delayed the restart, finished what I had to do and started some downloads p2p for the night. In the morning, the machine was dead frozen (no response from the keyboard or mouse, screen froze on an image of the screen saver). Since ctrlaltdel did not respond, I charge through the power button. The machine had a hard time to start the system and finally to resets. Starting in safe mode, he adorned the crcdisk.sys file.

  After a quick search, I found a solution that suggested the recovery of the system. Given the disks, I did. He had a lot of problems and has not completed the recovery. I have other tools (the so-called Vista PE Classic 2009 rescue), who has managed to restore the system to a point somewhere a week before this update. A prior diagnosis using some utilities on the drive said he can't vconnect to one of the partitions on the HARD disk. After the restoration of the system, the system woke up, starts perfectly and I was able to do some work and games. The next day, however (no update, no p2p, the laptop shut down correctly for 10 hours), the laptop was escapes sluggish, each application of gel or crashing after ~ 2-5 minutes. So I did another cover, to an earlier point. This time, I fully recevered and everything was dandy.

  Today, however, the laptop freezes on the TOSHIBA logo, with the F2 and F12 options, but will in fact anywhere.
  It just says: Please wait... after F2 and boot device selection menu entry after F12. I tried everything before disassembling the laptop (still on warranty).

  Any kind of help will be much appreciated. But go to an authorized TOSHIBA service would be quite a chore - that being far enough and myself being a disabled person.

  Perhaps that the HARD drive is loose, have you tried reinstalling it?

  If you press ESC during the Toshiba screen, sometimes it will show you what is happening behind the scenes, which can help diagnose the problem.

  I imagine that the laptop is under warranty, so if you can't make it work, you can send it to an ASP for warranty repair.

• avilion m8187c: screen freeze

  I recently met a screen occurring randomly gel that is unresponsive to attempts to open the Task Manager.  The only recourse that I seem to have is manually shut down the computer, and then restart.  The computer is usually very well for the rest of the session.  Reliability: remarks her abrupt closed but does not show the defects/failures of hardware or software.  My biggest concern is for the damage to the switching device it works (even with a minute or two between the two).  I also want to avoid the interruption of the annying.

  I have no idea what to do to solve this problem.  Good help would be really appreciated.

  Avast Anti-virus, Vista SP2 32 bit, Foxfire, 4 GB ram, Intel core duo clocked at 2.66 GHz

  Hi there @webbww
  
  I understand that you get random screen freeze, and that your computer is not responding at all to force a manual close. I'm happy to help you with this.

  Here is a page that covers a range of things for you to try in this case, try to isolate the cause. Ideally, you can have this page available on a different device when your screen freezes on you so that you can scroll through what to try. HP and Compaq Desktop PCs - Windows Vista crashes, freezes, or a blue error screen opens

  I would like to know if that helps at all.

• TouchPad freezes on Satellite L40 - 18Z

  Hi all, first Post.

  I am a former technician of I.T. & worked on computers since 1984, & on laptops since 2001.

  This topic is mainly about the L40 - 18Z, but 2 other models are mentioned.

  I met a problem with the TouchPad on a Toshiba L40 - 18Z, (& also an A100-338) running costs two installs 32-bit Vista Home Premium but not a recovery Partition or a Dvd.
  Same problem as well on a L300 - 25K running Windows 7 Edition Home Premium.

  The touchpad freezes sometimes. Sometimes, you can move the arrow cursor, but very slowly.

  All 3 work fine, now with a Usb mouse.

  ALL the latest drivers on the Toshiba site are installed on laptops all 3.
  All updates are installed with Microsoft.
  ALL have the latest Bios updates.

  The L300 - 25K & the A100-338, I think I solved the problem by installing the package of value added, but the VAP software is not listed in the section for the L40 drivers.
  I tried both the L300 & A100 VAP on the L40, but they did not work.

  Strangely, on the L40, I reduced the 1280 x 800 screen resolution to 1280 x 768 & the problem seems to have, at least for the last day or so!

  Also, I found that unplugging the power cord "cured" the problem on all 3 laptops right now.

  I tried to feed all 3 laptops without batteries at the same time that the fault occurred, but cela made no difference, while the batteries must be in agreement.

  The L300 is my own personal laptop & the other 2 are members of the family.

  I don't think that laptops specifications is relevant to this problem, but let's go anyway:

  Toshiba Equium L40 - 18Z (PSL48E-033008EN)
  32-bit Vista Home Premium
  Intel Cpu T2330 @ 1.60 ghz
  1.5 GB Ram Pc2-5300
  80 GB SATA hard drive
  TruBrite Lcd 15.4 "

  Toshiba A100-338 (PSAAQE-006008AV)
  32-bit Vista Home Premium
  Intel Cpu T5200 @ 1.60 ghz
  2 GB Pc2-5300 Ram
  100 GB SATA Hdd
  TruBrite Lcd 15.4 "

  Toshiba L300 - 25K (PSLB9E-03M02UEN)
  32-bit Windows 7 Home Premium (original Vista HP)
  Intel Celeron 900 Cpu @ 2.20 ghz
  2 GB Pc2-5300 Ram
  120 GB SATA hard drive
  TruBrite Lcd 15.4 "

  I would go to the bottom of this for all future repairs, so if anyone has any suggestions...?

  > I found that C:\Program Files\Synaptics\SynTPEnh.exe has been "blocked" so I moved the file to the desktop, unlocked, then he came back

  SynTPEnh.exe belongs to the Synaptics touchpad driver and I think that you have software installed on the laptop that doesn't work with this touchpad driver
  It's only a guess, but maybe some firewall or anti-virus tool could block this exe. Maybe you should check it using a clean operating system.

  Also try reinstalling the driver for the touchpad maybe it helps.