Scheduled automatic release arrested does not work WIP after zero at hand (i.e. level less than safety stock) in MRP Workbench

Similar Questions

• In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

  In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

  This has happened

  Each time Firefox opened

  == Looks like it started with a newer version of firefox, but this may have been coicidental

  You have other language packs languages installed?
  Tools > Modules > languages

  There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
  http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

  See also http://kb.mozillazine.org/Language_packs

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Scheduler quartz 1.6 does not work after migration application Java of 10g and 11g

  I used the Task Scheduler quartz 1.6 with Java application built in technology from 10g to Oracle using Jdeveloper 10 g as IDE.

  The application works fine with the mentioned technology. But after the migration of the application of technology 11g quartz scheduler does not work anymore. The Weblogic Server allows you to deploy this technology migrated is Weblogic server 10.3

  Finally, the issue is resolved.

  The problem is resolved after you delete the following jar files in my view-controller project: Api .jar-Trinity and the Trinity - impl.jar

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• My recovery key does not work even after resetting it. How can I solve it

  I signed into my account but lost the other device, so generate new key. This new generated key still does not work. Anny sugestion please?

  
  

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• HP Pavilion: Disk drive does not work even after I have installed and uninstalled

  Hello

  The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.

  This error appears when I look at the properties of disk drives:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I don't know what else to do.

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Paste an image into a layer mask does not work even after several approaches

  I can't paste an image into a layer mask. I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image but it still places the image in a new layer. I tried to paste through the Palette layers without success (pasta in a new layer). I tried to use past special from the Edit menu, but the past command is grayed out. Any ideas for why it does not work for me?

  I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image

  Did you select > all and edit > copy the image you want to put in the mask?

• HAdobe Illustrator CC 2015 does not work properly after upgrading from 2014 CC

  Adobe Illustrator CC 2015 does not work after update from 2014 CC. I have a black screen and I am unable to work. Tools work, but I don't see any results. Could you help me solve this problem? Thank you!

  Try the toggling of the GPU preview

  Display > GPU preview
  Windows: CTRL + E
  MAC: CMD + E

  You can also try switch to wireframe mode.

• 2 wireless automatic duplex printing does not work.

  I can't Auto 2 wireless faces seem to work on my OfficeJet J6480.  It connects and I can easily print but 2 sides printing\g works that manually.  It is a Windows 7 Home Premium 64 bit laptop and a standard computer also has the same problem...  2 automatic duplex printing works very well with a wired computer in the same way (64-bit Windows 7 Home Premium).  A way to solve this problem?

  Hello

  What do you mean by not working that manually?

  You see an automatic option two sides available or not, no specific error message?

  Additionally, make sure that the duplexer is enabled as follows:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Kind regards
  Shlomi

• Phone of blackBerry Smartphones does not work properly after upgrading Poynt

  Hello.

  Yesterday, I upgraded my poynt app, which seems to have causes all types of problems with my phone.

  (1) my email account icons have all disappeared, although it recognizes new messages, I can't access it.

  (2) the device does not allow me to access my texts all the time as well, and I get errors such as:

  Eception exception: application_net_rim_bb_message_app (231) does not.  I had the same message with several different numbers.

  I also have java.null messages, even if it is rare and I don't remember the exact error.

  (3) desktop manager cannot access the device, it does not allow me to backup my data.

  (4) I tried to reload the os, and applications but it fails because it cannot back up data...

  I'm lost and can't seem to find help on the net for this, and at this point, I want to just wipe the slate and start over from scratch.  Maybe completely reload the software or something.  I have most of my contact information on my sim card from my previous phone, data loss would be minimal...

  can someone help me please understand what to do.

  Info on the device

  Your carrier: att

  Model information and the version of the OS (go to settings, then Options, then):

  8900 v4.6.1.231 platform 4.2.0.108

  Apps and free space

  hard battery pull did not.

  Installed apps and their version if possible.  I have several apps installed:

  Poynt, bloomberg, score, xenozu, facebook, bablphone, CBS Spanish football, dictionary.com, anchor.  all are the latest versions, except for some reason any phone does not recognize that I have the latest version of home.

  but the last poynt update caused this, and I have already deleted poynt.

  Thanks in advance for your help.

  Thanks for your help.  So a question I had was that my camera was unable to save all the data, and therefore loader did not work properly.  I read somewhere that you can stop the car to the top, did this and reloaded the new os.  I think that things are finally working

  Thanks again for your help.

• Thunderbird does not work properly after copying old content profile in the new profile, what can I do

  My old laptop crashed, but fortunately I got the hard drive out, who now works as an external drive. I installed TB on my new laptop computer. I copied the contents of the old file to profile in the new profile file and start of TB. I have all my files of pace, but TB does nog works correctly. After that connection, it takes forever to load the new messages, when I leave a message to another, the first answer I get is "TB not responding' and after a few minutes, I finally get to the next message. Same story with 'reply' or 'delete '. I already tried to delete the index file and have tuberculosis still indexing message folders, but this did not help.

  I noticed that my old profile files seems to have a sort of double files in the subfolder Mail, old accounts. For example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl. I'm not sure what they are (they seem to hold different versions?) or is it relevant?

  When I search the AppData/Roaming/profiles I'll find it (on the old and the new hard disk as well) but I can not navigate on him (some parents of hidden file)? I checked the rights on the files of my account profile (Administrator rights). I don't know what to do more, so I hope to help.

  Re: for example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl.
  Here's the e-mail accounts for pop e-mail account. If you have several addresses on the same server, it will have the same name but an additional example:-1 appended to the name. If you got an e-mail account, it can also create and add the additional number. Why you have several, I can't say with certainty what caused them without knowing what you have done. The point being, you must have the directory Local pointing to one that is correct and has all your existing emails.

  Profile files are hidden files.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  Info on profile:
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  What local directory is set to the e-mail account?
  "Tools" > "Account settings" > "Server settings" for the e-mail account
  bottom right under "Local Directory"
  It will say something like this:
  C:\Users\User account name\AppData\Roaming\Thunderbird\Profiles\abc12345.default\Mail\pop.tele2.nl

  Copy paste the info on this issue, so I don't know which e-mail account you use.

  How many email accounts you listed in the left pane in the account settings? You have just the one pop email account and local folders?

  What antivirus do you use?
  If you McAfee please read;

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  How many emails you have in the Inbox folder?
  It is advisable to use the Inbox folder as a mailbox for incoming mail, and not as a general storage. Suggest you create folders and move all the emails in the Inbox in other appropriate folders, then right-click on Inbox and select "Compact".

  Good info explaining what is compaction and why it is important:

  • https://support.Mozilla.org/en-us/KB/compacting-folders?ESAB=a & s = Compacting & r = 0 & As = s

  It is also a good idea to Archive mail older than a few months.
  Implemented for archive by month and keep the structure of archive folders. These emails will still be visible by 'Archives' folder and in your profile, but check-in will reduce the size of files and therefore less memory use during their opening.
  Info on archiving Options:
  https://support.Mozilla.org/en-us/KB/archived-messages