Paste an image into a layer mask does not work even after several approaches
I can't paste an image into a layer mask. I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image but it still places the image in a new layer. I tried to paste through the Palette layers without success (pasta in a new layer). I tried to use past special from the Edit menu, but the past command is grayed out. Any ideas for why it does not work for me?
I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image
Did you select > all and edit > copy the image you want to put in the mask?
Tags: Photoshop
Similar Questions
-
HP Envy 4520: Scan to computer DOES NOT WORK even after SEVERAL installations!
I want to scan but'm consently says "enable scan of the computer' in the settings of the printer. I go to settings, click on the "Computer Scan" menu to be told:
"The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »
Only, I did already! I need answers.
Welcome to the community @Anton-Cross-1 HP
I read your post and wanted to comment. I checked the drivers on hp.com for your printer model to find out there are not full of features of updated the Sierra drivers. Of my own knowledge, complete drivers must be installed to scan from the printer to the computer.
Maybe the Apple link below can help. In the meantime, I'm not sure as to the if or when complete drivers will be released to 10.12. You will not be able to scan using HP software, then you can try on your Mac such as Apple Preview or Capture of Image methods.
Find the drivers here: http://support.hp.com/us-en/drivers
Printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks: https://support.apple.com/en-us/HT201465
Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
-
Layer mask does not work correctly.
My normal layer mask does not work correctly. When I click on add a layer mask, I get this instead. I change a setting by chance? He won't let me see where my traditional black and white mask.
Hello
In the layers panel, click the dropdown menu, click on Options in the Panel and select one thumbnail size other than None.
-
HP Pavilion: Disk drive does not work even after I have installed and uninstalled
Hello
The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.
This error appears when I look at the properties of disk drives:
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).
I don't know what else to do.
Thank you.
Hello
Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.
http://support.Microsoft.com/kb/982116
Kind regards
DP - K
-
My recovery key does not work even after resetting it. How can I solve it
I signed into my account but lost the other device, so generate new key. This new generated key still does not work. Anny sugestion please?
-
Paint on layer masks does not work?
Hi, I'm working on a work of Digital Art classes... Deadline tomorrow, I left it quite late because I knew what to do, and he was out in my head on how to do it. And behold, I encountered a problem with paint on a layer mask.
I did a form (Magenta, so I know I paint on the correct layer) and have selected layer mask, but when I try to paint black on it to give it a bit of shading is as if she is wiping out so I can see the layer behind it, even though I see that it is indeed drawing anywhere in the mask layer in the layers panel anyway?
Until something happens, I'll just go try and find an alternative
(Photoshop CS6)
Any help is appreciated!
Painting on the layer mask with black going to 'clear' of the image. That's the whole point of a layer mask. If you want to shade it (non-distructively) then create a new layer above that layer and hang it on her, pressing alt/opt clicking on between the layers in the layer panel. Then you can paint black on the new layer, and it will be displayed only when the lower layer's pixels. You can then change it without messing up the base layer.
-
Listener code to add a layer mask does not work...
With the help of Photoshop CC 2014 with all updates. The following script listener code has been saved when I clicked on the button, add a layer mask to add a mask to the active layer. When executeAction is called the script fails with the following error message. Help! How can I add a layer mask to the layer? Thank you.
: Error General Photoshop. Maybe this feature is not available in this version of Photoshop. -The command 'Make' is not currently available.
function addLayerMask() {}
Adds a layer mask to the layer by clicking on the
Add the button layer mask.
var idMk = charIDToTypeID ("Mk");
var desc23 = new ActionDescriptor();
var idNw = charIDToTypeID ('Nw');
var idChnl = charIDToTypeID ('channel');
desc23.putClass (idNw, idChnl);
var idAt = charIDToTypeID ('At');
var ref20 = new ActionReference();
var idChnl = charIDToTypeID ('channel');
var idChnl = charIDToTypeID ('channel');
var idMsk = charIDToTypeID ("Msk");
ref20.putEnumerated (idChnl, idChnl, idMsk);
desc23.putReference (idAt, ref20);
var idUsng = charIDToTypeID ("Usng");
var idUsrM = charIDToTypeID ("rocket");
var idRvlS = charIDToTypeID ("LVR");
desc23.putEnumerated (idUsng, idUsrM, idRvlS);
executeAction (idMk, desc23, DialogModes.NO);
}
This code works if you have an active selection.
function addLayerMask() {}
Adds a layer mask to the layer by clicking on the
Add the button layer mask.
var idMk = charIDToTypeID ("Mk");
var desc23 = new ActionDescriptor();
var idNw = charIDToTypeID ('Nw');
var idChnl = charIDToTypeID ('channel');
desc23.putClass (idNw, idChnl);
var idAt = charIDToTypeID ('At');
var ref20 = new ActionReference();
var idChnl = charIDToTypeID ('channel');
var idChnl = charIDToTypeID ('channel');
var idMsk = charIDToTypeID ("Msk");
ref20.putEnumerated (idChnl, idChnl, idMsk);
desc23.putReference (idAt, ref20);
var idUsng = charIDToTypeID ("Usng");
var idUsrM = charIDToTypeID ("rocket");
var idRvlS = charIDToTypeID ("LVR");
desc23.putEnumerated (idUsng, idUsrM, idRvlS); reveal selection
executeAction (idMk, desc23, DialogModes.NO);
}
app.activeDocument.selection.selectAll ();
addLayerMask();
To add a layer mask without an active selection is the scriptlistener code you would need
function addLayerMask() {}
var idMk = charIDToTypeID ("Mk");
var desc25 = new ActionDescriptor();
var idNw = charIDToTypeID ('Nw');
var idChnl = charIDToTypeID ('channel');
desc25.putClass (idNw, idChnl);
var idAt = charIDToTypeID ('At');
ref19 var = new ActionReference();
var idChnl = charIDToTypeID ('channel');
var idChnl = charIDToTypeID ('channel');
var idMsk = charIDToTypeID ("Msk");
ref19.putEnumerated (idChnl, idChnl, idMsk);
desc25.putReference (idAt, ref19);
var idUsng = charIDToTypeID ("Usng");
var idUsrM = charIDToTypeID ("rocket");
var idRvlA = charIDToTypeID ("RvlA");
desc25.putEnumerated (idUsng, idUsrM, idRvlA); reveal all
executeAction (idMk, desc25, DialogModes.NO);
}
addLayerMask()
There are once again hide all
var idMk = charIDToTypeID ("Mk");
var desc33 = new ActionDescriptor();
var idNw = charIDToTypeID ('Nw');
var idChnl = charIDToTypeID ('channel');
desc33.putClass (idNw, idChnl);
var idAt = charIDToTypeID ('At');
var ref27 = new ActionReference();
var idChnl = charIDToTypeID ('channel');
var idChnl = charIDToTypeID ('channel');
var idMsk = charIDToTypeID ("Msk");
ref27.putEnumerated (idChnl, idChnl, idMsk);
desc33.putReference (idAt, ref27);
var idUsng = charIDToTypeID ("Usng");
var idUsrM = charIDToTypeID ("rocket");
var idHdAl = charIDToTypeID ("HdAl");
desc33.putEnumerated (idUsng, idUsrM, idHdAl); Hide all
executeAction (idMk, desc33, DialogModes.NO);
-
USB and a targus wireless mouse does not work, even after the help of MS tech.support
Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it
Hi DebraKennedyUP,
1. did you last changes made on your computer before the show?
2. What is the operating system installed on your computer?
3 - is the same mouse work on different computers?
Perform the following troubleshooting steps:
Method: 1
Configure the computer to clean boot and check how it works.
To configure the computer clean boot, follow the steps in the below link:
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Method: 2
Run the troubleshooter of material to find exactly the problem.
Open the hardware and devices Troubleshooter
Method: 3
Also, proceed as shown in the following link.
Hardware devices do not work or are not detected in Windows
Method: 4
I suggest you to update the drivers and check how it works.
-
How to paste a picture into the layer mask? (Photoshop Cs6)
How to paste a picture into the layer mask? (Photoshop Cs6)
Try the steps in this tip video tutorial:
Good luck!
See you soon,.
Kendall
-
How to copy and paste into the search engine does not work?
How to copy and paste into the search engine does not work?
It should be.
Restart your Mac and try again.
Other than that, make sure that OS X is updated.
Open the App Store, and then select the updates menu.
-
Hallo,
ICH habe eine writing-Maske standing. In der Voransicht auf der Zeitleiste looks man die Maske,.
Wie sie richtig should be.
Aber in exportierten und swf videos. Dateien wird die Maske non dub.
Was mache ich please.
Hello
I created a signature mask. In the Preview on the timeline, you can see the mask,
as it should be correct.
But in exported swf videos. files the mask does not work.
What I am doing wrong.I don't see anything that looks like a mask on your stage effect.
in general, I think the image hidden (below OCAKBAŞI) is visible and nothing else. you have two other visible layers makes it difficult to see what you are trying to demonstrate.
text mask problems generally, because the text is not broken down into vector shapes (by clicking on edit > to break > to break).
-
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Mr President.
What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.
--SL_CUSTOMERS table data INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW BEGIN IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN SELECT SL_CUSTOMERS_SEQ.nextval INTO :NEW.CUSTOMER_ID FROM DUAL; END IF; END; /
When I try to insert several records with the seq.nextval it gives error
violation of primary key.
INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd') ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1 One error saving changes to table "ALIZA"."SL_CUSTOMERS": Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1
Concerning
Mr President.
I find the solution by creating a function before the triiger
as below
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS BEGIN RETURN SL_CUSTOMERS_SEQ.NEXTVAL; END; / CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW DECLARE dummy VARCHAR2(200); BEGIN dummy := get_SL_CUSTOMERS_vId(); :NEW.CUSTOMER_ID := dummy; END; /
It works very well
Thank you all for the suggestions.
Concerning
-
My system restore does not work even in safe mode and I can't download anything.
Original title: Hi, one day I turned on my pc. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work.
There was nothing but my background, then after 2 minutes my desktop icons appeared. But no start bar. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work. Help! PLeeease.
Hello
1. have you made changes on the computer recently?
Method 1.
Let us firstly the sfc scan and check if there is any missing system file.
Reference:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747Method 2.
Try the methods listed in the articles below and check.Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/Method 3.
Re-enter the Setup engine
a. Click Start, click Accessories and then click command prompt.
b. at the command prompt, type the following and press ENTER after each line:MSIExec /UnregisterMSIExec/regserverMethod 4.
If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783How to copy data from a corrupted to a new profile in Windows XP user profile
http://support.Microsoft.com/kb/811151How to recover damaged Windows XP user profile
http://support.Microsoft.com/kb/555473I hope this helps.
-
My optical mouse 3000 does not work even if the red light is on in the background
My optical mouse 3000 does not work even if the red light is on in the background
Hi Russell,
Thank you to contact Microsoft Community and we will be happy to help you with your concern.
According to the description, it looks like you are facing a problem with the optical mouse 3000.
It would be great if you could answer these questions to help you further.
1. have you made changes on the computer before this problem?
2. you receive an error message or error code?
3 is confined with any specific application?I suggest you to see the steps in the following Microsoft article.
Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windowsTroubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398
Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122
We would be more than happy to help you if the steps above did not solve the problem.
Maybe you are looking for
-
My husband and I use kindle on our own devices and often want to read the same book at the same time. Is there a way that we have each our own bookmarks?
-
Portege A200 LAN drivers wanted
Hello My hard drive has been replaced recently and now I don't have any LAN / drivers ethernet. I tried to look on the download section of the Toshiba site driver but I can't find this model listed. I was wondering if there was a similar model that i
-
I got a pop up all the time to change the paper painted behind each of the toolbars. There are a ton of choices and I thought it would be fun to have Me. Despicable now, I'm tired of it and does not know how to change it to something else, even back
-
Small white square on the left tab
As you can see in this capture screen http://img543.imageshack.us/i/firefoxo.jpg/ I see a small white square on the right on the left tab and I don't know where it comes from.
-
Client disconnection from the 887VA-W router WiFi
Hello I have several pc, Mac and smartphones all connection with happiness to the AP embedded (AP802) of a router 877va-w, outside of a pc (Samsung Ativ book 9 lite) who guard disconnect and reconnect every few minutes. The ssid is configured for WPA