Scheduled reports in appworld do not seem to work at the moment

Similar Questions

• My map of 3000 - x 11 network of Satellite do not seem to work at all

  I had recently a 3000 - x 11. It is original, network card do not seem to work. The guy who originally purchased the laptop told me he has never managed to make it work! The modem works fine however. The rj45 port seems ok.

  However, I have a LAN connection if I use an external network card. I start wondering if this laptop has had an original card mounted inside network. This laptop was purchased at the end of 2001. When I plug a cable in there, there is no light next to the rj45 connector.
  Is there a way to allow the original card or something?
  Any ideas anyone?

  Hello

  I found the info that this device has no LAN card and you must use an external.

• FSX does not seem to work.

  FSX does not seem to work and when I press the ALT key, nothing appears in the upper part of the screen. In addition, the mouse cursor becomes black if it isn't in arcade mode (CTRL + Y). Does anyone know how this can be fixed? Thank you! :)

  Hello

  Please report the problem to Microsoft Community.
   
  We suggest you to contact support FSX.
   
  See the links below for assistance.
  http://marketplace.Xbox.com/en-AU/product/Flight-Simulator-X/66acd000-77fe-1000-9115-d8044d530935
   
  http://support.Xbox.com/en-us/?XR=shellnav
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• How can I remove an iCloud account because I don't want one, but El Capitan insisted to set up a when I installed it on my iMac, and now Apple, in their wisdom, do not seem to give me the option no matter how I try, and I'm getting annoyed now. Thank you

  Please can someone tell me how I can remove an iCloud account because I don't want one. El Capitan insisted to set up an when I installed it on my iMac, but Apple, in their wisdom, do not seem to give me the possibility to remove no matter how I try and I get annoyed. Thank you very much

  Welcome to Apple Support communities

  You can disconnect to iCloud by going to Preferences-> iCloud-> Sign Out System. use iCloud is not required, so you can stop using it if you do not need.

• How to unlink a text box? Break in the menu icon does not seem to work.

  How to untie the two text boxes?  The break in the menu link icon does not seem to work.

  Hello

  We would like to know the following details from you to help you to come.

  (1) what application you want to use?

  (2) text box are what line you referring?

  (3) what version of the Windows operating system you have installed on your computer?

  (4) what happens when you click on the pause icon

  Your answers are important to us. Please write to us with more description of the issue so that we can understand the question better to help you.

• Microsoft Silverlight, Flash Player etc. are installed, but do not seem to work on my laptop

  Microsoft Silverlight, Flash Player etc. are installed, but do not seem to work on my laptop Pavilion dv6. What should I do to him? Have no idea of computers!

  Moved from feedback

  Original title: System Update updates microsoft windows

  Hello

  I suggest you check out the link uninstall Silverlight completely and re-install:

  Uninstall previous versions of Silverlight on Windows

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  Also check out the link to install Microsoft Silverlight:

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If the problem is not resolved, please answer and we will be happy to help you.

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• PowerConnect 6200 ACL does not seem to work

  Hello

  I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF.  I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work.  I have tried many combinations to try to get this working, but so far without success.  It's just a simple ACL, which should allow the web/http traffic on the 10.1.30.100 server and blocks everything else.

  The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask 0.0.0.0 it's just all this blocking.  Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly?  I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.

  1. config
  2. int vlan 720
  3. no ip-group vlan720-in in access
  4. output
  5. No list of access-vlan720-en
  6. access-list vlan720-in permit tcp any 10.1.30.100 0.0.0.0 eq 80
  7. int vlan 720
  8. IP access-group vlan720-in in
  9. output
  10. output
  11. copy, run start
  12. There

  Just an update on this issue.  I worked with Dell to determine why the ACL does not seem to work.  We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry.  This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.

  This has been the source of my problems that my traffic is not limited to a single 6200.  I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.

  First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5.  They are both on the same subnet 192.168.5.0/24.  The ACL has a statement of "permit icmp any one" but nothing else.  The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test.  The firewall on both is disabled.

  PC #1 IP: 192.168.5.2/24
  PC #2 IP: 192.168.5.3/24

  [6200]
  |    |
  |    |
  |   [2950T #2] <-->[PC #2]
  |
  |
  [2950T #1] <-->[PC #1]

  In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.

  Dell said that this is normal and if you want communication VLAN VLAN you 'license ip ' to make it work properly.  I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic.  As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets.  So in this case "ip enable any ".

  I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750.  So there is a work around.  I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.

  Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.
  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750/software/release/12.2_25_see/configuration/guide/swacl.html#wp1572522

• Internet does not seem to work after you have uninstalled Avira Premium Edition, but Google Chrome works

  Recently, I uninstalled Avira Premium Edition. I opted for 1 month trial but I uninstalled before the expiry of 1 month. The uninstall process went well. But when I restarted the computer, the Internet does not seem to work, but Google Chrome works as usual. When I tried to connect to MSN, it says "error Code: 80072ee7. It's something on the Internet connection. I guess it takes some files that must have accidentally disappeared with the uninstall process.

  Any help will be greatly appreciated. Thank you.

  Hello

  If Internet does not cam chrome Google work either.

  So, we know not what does not work.

  In any case, try this.

  
  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Leaves open and closing signals do not seem to work

  Of the clues as to what special qml/qt/cascades magical thing you need to do to get the sheet open and closed signals to deliver?

  The Basic code fragment is

  Sheet sheet is iNewSheet-> Construct();.
  bool ok = connect (sheet, SIGNAL (closed ()), this, SLOT (onSheetClosed ()));
  Q_ASSERT (OK);
  OK = Connect (Sheet, signal (Opened ()), this, slot (onSheetOpened ()));
  Q_ASSERT (OK);
  sheet-> open();

  Both links it seem to work - as in there is no assert.

  The sheet is open ok, but no signal is transmitted

  The sheet can be closed ok, but no closed signal is transmitted.

  We also tried the openedChanged() signal, but that doesn't seem to be delivered either

  If any readers

  No idea what we have changed but the

  Plug finished animation + is now open and the

  Care ended animatng + is now completely closed

  signals which do not seem to work previously now work.

  We can only guess its something to do with the parameters of the method 'connect' or maybe the location of the statements of breeders or possibly using "Q_SLOTS" and not statement 'niche roles' or some other thing random Qt that would be taken by either the preprocessor, the compiler C runtime connect() returns value or other tools applied to the CBC to he mangle in Qt code.

  What exactly is the problem with normal standard C++ interface inheritance for most of these?

• BBC Iplayer - Flash Player Error ("content does not seem to work")

  Hello

  I use a Mac OSX El Capitan-version 10.11.3

  Browser Safari version 9.0.3

  Flash Player version 21.0.0.197

  The problem:

  Various shows on the BBC Iplayer play and displays the following message: this content does not seem to work. "Please try again later".

  It occurs on all the shows, but a bit random. When I right click in the window of the video I get this, tells me that there is a "Flash 1024 error."

  

  When I copy the content, the error is:

  Error code: EmpBaseErrorVO

  code = 1024

  type = either reading is possible due to a mistake of the mediation

  Details =.

  1026

  severity = critical

  responsibility = MediaSelector

  Info = 1026

  I tried constantly to turn ugly. No online forums provide clarity. Can someone from Adobe explain please what means this error and what I can do to solve this problem?

  Thank you

  Hello

  This started after 21.0.0.197 updated?  It worked very well in the previous (21.0.0.182) version?

  You have installed/activated advertising blockers?

  You access the site through the VPN?

  You have installed security software/utility?  If so, which?

  It works with other browsers (Firefox, Chrome, etc.)?

  --

  Maria

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• Muse error 'public_html' folder does not seem to point to the site

  Still getting this error after checking my entries: muse error 'public_html' folder does not seem to point to the site

  What other ca I do?

  Try to use public_html/domain.com where domain.com is your site domain name.

  Related articles:

  https://forums.Adobe.com/thread/1581846?start=0&TSTART=0

  Folder does not appear to point to the site

  Thank you

  Sanjit

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• Import photos to fix or mixture doesn't seem to work in the film. The photos are raw shot with nik0n d800 imported into the camera from an sd card

  Import photos to fix or mixture doesn't seem to work in the film. The photos are raw shot with nik0n d800 imported into the camera from an sd card

  Hello!

  Mix and Fix do not support the raw file format. Please try to download as a. JPEG. However, the support of raw files is an excellent idea for a future feature! If you do not want to share this idea with the team, press the icon of the product in the upper left of the application, and then click "give us your comments. I would like to know if I can help with anything else!

  See you soon

  -Kathleen