OBIEE Administration tool too slow

Similar Questions

• 11.1.1.9 OBIEE administration tool

  Hi I installed the last OBIEE on Linux server. How can I use to start administration tool to create a file of the RPD. I went through the documentation but not obvious. What I have to download the full 64-bit windows software and install the software alone or do I have an option?

  

  It's what Christian: in the OBIEE front page 'Home' at the bottom left you have a list of links in the "BI Desktop Tools download" to download a few different clients, one of them is the 'Oracle BI Client Installer", this is the one you need.

  Your linux installation already 'contains' the .exe to install the administration tool on a Windows System.

  11.1.1.9 Admin tool is certified for Windows 7 and 8.1 and it works on a 64-bit of Windows Installer (you must set a parameter on the exe to run Windows 7 or the installer fails with an error: If you Google the error it tell you the parameter set as it looks like it ' has an error happening during the installation of many software on 64-bit Windows 8.1).

  PS: the screenshot is SA406, 11.1.1.7, running, but it must be the same (and maybe some formulations) in 11.1.1.9.

• How do the function of Oracle database in OBIEE Administration tool

  Hi all
  I want to use an Oracle database function as a column in OBIEE (BM, presentation model). Can someone made this inOBIEE. Pointers to this is much appreicated.
  
  Thank you

  Hi user7417334,

  You cannot use the formulas in the presentation layer (not that I know well). But you can certainly use functions of oracle database in MDB layer.

  You want to use the function EVALUATE. It works like this:

  can EVALUATE (' TO_DATE (%1, %2) "AS DATE, 31 December 2009", "MM/DD/YYYY" ")

  Generic version: EVALUATE ('' AS , value1, value2, etc.)

  FUNC) is the syntax for the function you are calling. All parameters must be replaced with %, where number refers to the order in which you specify your settings.
  DATATYPE) the type of data that will allow to evaluate the function. In this case, the DATE.
  Value1) the last part of the formula is a list separated by commas of all parameters used in the function. In this case, this is the date I want to ride
  Value2) is the second parameter. You need as many times as you have referenced in your function. In this case, it is the date format.

  Good luck and if you found this post useful, please give points!

  Best regards

  -Joe

• MÜDE - administration tool to use OBIEE DPR

  Hi all

  We have OBIEE installed in dev server and to implement the MUDE

  We want to use the shared folder on the same server for master SPR.

  is it possible to use the same Server Admin tool to access the DPR MÜDE, or do we need to install Client for MÜDE administration tool. (this will be installed too OBIEE admin and Client tool server) is possible.

  Thank you

  Using the tools of the client on the server is usually not the best idea (it is a server, not a customer), there is no reason why you cannot configure administration tool for the local mud folder.

  But, I think that to answer your question - admin admin tool is - there is was no difference for the administration tool installed with the server OBIEE administration tool installed as standalone client tools.

• Error establishing connection to OBIEE for Essbase administration tool

  Hello

  I want the tool OBIEE Admin (on PC) to connect to the Essbase server.

  But I can't get it to work.

  ***

  BIEE 11.1.1.9.0

  EPM (Essbase Client) 11.1.2.3.0

  ***

  The error is: "Essbase error 0.

  In the local log file:

  [2015-06 - 04T 15: 27:46.566 + 02:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid:] [tid: 1 b 64] [46158] Administration verwendet language DEU.

  [2015-06 - 04T 15: 27:46.573 + 02:00] [OracleBIServerComponent] [TRACK: 1] [] [] [ecid:] [tid: 1 b 64] loading metadata javads

  [2015-06 - 04T 15: 28:48.251 + 02:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid:] [tid: 1 b 64] error Essbase 0

  [[file: server\Query\Execution\DbGateway\DbGatewayEssbaseCAPI\PrivateInclude\SQXDGEssbaseCAPIImport.h, line: 67]]

  ]]

  Be kind enough also to take a look here, since there are already some extra info:

  Business Intelligence > Business Intelligence Foundation > Business Intelligence Suite Enterprise Edition > Diskussionen

  https://community.Oracle.com/thread/3730336

  I'm not sure if this is a problem of setting (path) at all. I've seen a lot of different "correctness" and recommendation in this regard - taste too for my personal use... and non of them changed the game well.

  I'm a bit desperate.

  Thank you very much in advance and greetings.

  André

  I had really any problems.

  The client computer, installed 11.1.1.9 OBIEE administration tool.

  An Essbase installed 11.1.2.4 customer, I installed this version as it corresponds to OBIEE 11.1.1.9 as who uses 11.1.2.4 drivers.

  Update bi_init.bat to include the ESSBASEPATH variable and adds the path to the variable ESSBASEPATH\bin

  

  Open the online administration tool, import

  

  Tested the connection to two 11.1.2.3.506 and 11.1.2.4 Essbase

  

  Imported fine.

  See you soon

  John

• "Couldn't administration tool load Essbase pilot. Please check the configuration.

  Dear all,
  

  
  

  We are facing problem in OBIEE administration tool while creating the new repository by selecting the data source as Essbase. And also, we shared the document that contains the steps made by us to solve this problem.

  
  

  Question in the selection of Data Source as Essbase

  While creating the new repository in the administration tool by selecting the data source such as Essbase, the following error occurs.

  "Admintool cannot load driver Essbase. Please check the configuration.

  Brief description of our environment

  In our scenario, BI Server running under Linux and running in Windows administrative tool.

  The work done in the Windows Machine (administration tool)

  1. 1. set the Variable of environment PATH and ESSBASEPATH as 'C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient'
  2. Adding information ESSBASE to bi - init.cmd
     1. File located in "C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus customer Tools\oraclebi\orahome\bifoundation\server\bin"
     2. (b) define as 'C:\Oracle\Middleware\EPMSystem11R1\ products\Essbase\EssbaseClient' ESSBASEPATH
     3. c. set the path as %ESSBASEPATH%\bin;%PATH%
     4. Save and close the file.

  The work done in Linux Server (BI)

  1. Change the .bash_profile to export values of the variables in the path and ESSBASEPATH,
     1. a. export ESSBASEPATH = / app/oracle/poet/Oracle_BI1/clents/epm/Essbase/EssbaseRTC
     2. b. export PATH =: $ESSBASEPATH/bin
  2. Adding information ESSBASE to bi - init.cmd
     1. a. file located to "/ app/oracle/poet/instances/instance1/bifoundation/OracleBIApplication/coreappplication/setup"
     2. Check the value of ESSBASEPATH and mentioned PATH as "/ app/oracle/poet/Oracle_BI1/clents/epm/Essbase/EssbaseRTC ' and: ${ESSBASEPATH} / bin respectively.
     3. If the value is inconsistent then to update the same as those mentioned above in the file (bi - init.cmd)
     4. Save and close the file.
  3. Update information for ESSBASE in OPMN. XML file,
     1. a. file located in the "/ app/oracle/poet/instances/instance1/config/OPMN/opmn '
     2. Under the label "ias-component id" , find the line as
     3. c. < variable id = "ESSBASEPATH" value = "$ORACLE_HOME/customers/EMP/Essbase/EssbaseRTC" / >
     4. d. <variable id="PATH" value="$ORACLE_HOME/common/ODBC/Merant/7.0.1/lib$:$ORACLE_HOME/bifoundation/server/bin$:$ORACLE_HOME/bifoundation/web/bin$:$ORACLE_HOME/clients/epm/Essbase/EssbaseRTC/bin$:$ORACLE_HOME/bifoundation/odbc/lib$:$ORACLE_INSTANCE$:$ORACLE_HOME/lib$:$PATH$:$/bin" append="true"/>
     5. If the value is inconsistent then to update the same as those mentioned above in the file (opmn.xml)
     6. Save and close the file.
  4. Restart OPMN
     1. Navigate to the following location
     2. b. "/ app/oracle/poet/instances/instance1/bin '.
     3. c. enter the command as . / opmnctl status/stopall/startall

  
  

  But the issue has not been resolved and we expect your support and useful suggestions to overcome this problem.

  
  

  Thank you and best regards,

  SaiSC
  

  Keep "simple" things, you have a 64-bit Windows, just install a client of Essbase 64-bit...

  Go to delivery under the "Oracle Enterprise Performance Management System" product packaging, download only the 'EPM system release 11.X.X.X.0 Client Installers' and there inside, you have the Essbase client (it's a bit silly that you need to download a file of 2 GB for just the small Essbase client, but this is the best place I found to always get a good record). Install it, then point the mailed earlier to the right path environment variable.

  I did and it worked by himself in all my Windows 64-bit.

  Use of the 32-bit clients on 64 bit OS what you always end with questions because of the default path pointing 64-bit slots and so things are missing or you have a mix of 64 and 32-bit.

  (I guess that's not important if you choose 11.1.2.4, 11.1.2.2 or 11.1.2.3, they work I would say, but if I'm not mistaken the Essbase installed by OBIEE is more 11.1.2.2...) For you, it isn't. (2.4)

• 'ADMINISTRATION TOOL' RESEARCH RELATED

  Hi all
  
  I have a few questions about OBIEE administration tool, asking for help to get answers to these.
  
  OBIEE version 10.1.3.4.0, no information on these queries using / / site documents related to these issues would help me.
  
  1 suppose that I have more than one dimension in a single RPD model, more than one developer to join this RPD. Is it possible to restrictaccess a model dimension so that he or she will not be able to access the other models?
  
  2. where there are several rpds in the Administration and many developers tool access, can security be defined as "User will have access only to the SPR1" can not access any other RPD/off line.
  
  3 administration tool must be installed on the server, or it can be installed in the customer system also? ask this question because if more than one developer wants to access to the administration tool at the same time how it is possible?
  
  4. in my SPR I have dimension models (more than one), can I import a model of this RPD to other RPD?
  
  5. What is the multiuser environment? This will help one of my above requirements?
  
  Thanks in advance

  1. No, but you can use the MUD to set different projects so that the developers "check out" the they work on projects. See the links provided on the previous answer.

  2. the guarantee is defined in each RPD. To open a RPD you must be a user administrator defined in this RPD. Online access may be restricted if you block your BI servers on port 9703 connections so that they can come to a local connection or IP addresses defined. You will need if a firewall for that. Offline access cannot be restricted. If I have a RPD locally and I have an admin account I can open it anywhere I want.

  3. the customer alone is fine. You simply install the client tools on each developer's computer.

  4. Yes, search this forum for 'fusion repositories', a lot of guidance already available.

  5. the links above give you a good explanation of what is MUD and what it's for. Searching this forum also gives you a lot of information.

• SPR in OBIEE is different from that of the administration tool

  I have edited the RPD (new.rpd) and deploy it to the server. When I opened OBIEE, I got the new area of topic, but when I change online the RPD in the administration tool, the RPD was the old one (SampleAppLite), so I can't edit online the RPD. Can I know how to change online the new RPD? I want to change online the new RPD. Why has this happened? Thanks master

  Dear Sir

  I think you're wrong to choose the port. try to watch your em, then go in Business Intelligence - coreapplication - availability - process tab. I guess you are using 11g, but if you use 10g. simply stick to the word of availability, you can find this in Capacity Management tab. Then look at the BI server, check the host and port. Start making your DSN from that. I hope it helps

  Satya

• Administration tool (11g) - I can get it from the web interface OBIEE (analytical)

  Hello

  My users do not have the right to install anything by themselves on their workstation. But to test the reasons I provide the Administration tool. Can I download it somewhere from the interface web (for example as you can download it BI Desktop Tools)?

  OBIEE version is 11.1.1.7.

  Thanks for your reply.

  Kind regards

  Dominic CHITAC

  YOURSERVER/saw.dll? bieehome<-- there's="" a="" download="" link="" but="" you="" will="" still="" need="" to="" install="" it.="" that="" will="" just="" get="" you="" the="">

  Moreover, they are on your server under INSTALLFOLDER/MiddlewareHome/Oracle_BI1/clients

• Unable to display the users in the administration tool - identity, OBIEE 11 G

  Hi all
  
  I used OBIEE 11 g on Windows7
  
  I can't see all the users in the administration tool-> manage-> identity-> users tab in the right pane.
  However, the application roles are visible.
  
  I am able to see users and application roles in the administration console.
  All new created user is not visible. Due to this setting log level for each analysis individually became a problem.
  
  Could you get it someone please let me know what could be the problem?

  Ugh, you have to go ' Actions / Set filter user online ' and put a * in the box. Oracle, in their infinite wisdom decided to set the default value to show any user (I submitted a request for improvement for this a year ago...)

  Hope this helps,
  Scott

• Mac became too slow

  My mac became very slow and hangs very often. I restarted computer, run EtreCheck and here are the results:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-07-02 00:23:49

  Download EtreCheck from https://etrecheck.com

  Time 07:19

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (27 inch, mid 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac12, 2

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  12 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) /Volumes/firmwaresyncd.xIdRcr: 210 MB (182 MB free)

  Macintosh HD (disk0s2) /: 999,35 (Go 386,65 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5690H)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. IPhone.

  Western Digital Elements 2 1078 TB

  EFI (disk1s1) < not mounted >: 210 MB

  Elements (disk1s2) / Volumes/items: 2.00 TB (56,55 GB free)

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Toast 10 Titanium/Toast Titanium.app

  com.roxio.BluRaySupport [no charge] (1.1.6 - 2015-11-20) [Support]

  / Library/Extensions

  com [no charge]. FTDI.driver.D2XXHelper (1.0 - SDK 10.11 - 2016-06-03) [Support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.15 - 3 - 10.11 SDK - 2016-06-03) [Support]

  ~/Library/services/ToastIt.service/Contents/MacOS

  com.roxio.TDIXController [no charge] (2.0 - 2012-01-22) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 162 tasks Apple

  [operation] 68 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 157 tasks Apple

  [operation] 89 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-07-02) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2016-04-12) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2012-12-18) [Support]

  [operation] com.wacom.wacomtablet.plist (2015-12-17) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2016-06-30) [Support]

  [loading] com.adobe.agsservice.plist (2015-09-26) [Support]

  [loading] com.adobe.fpsaud.plist (2016-06-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2012-12-18) [Support]

  [loading] com.wacom.displayhelper.plist (2015-12-17) [Support]

  [operation] hdjsd.plist (2016-05-27) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2012-01-22) [Support]

  [loading] com.divx.agent.postinstall.plist (2012-01-29) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  WacomTabletDriver Application (/ Library/Application Support/Tablet/WacomTabletDriver.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Application of Google Reader (Google Drive.app/Applications /)

  NIHardwareAgent Application hidden (/ Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)

  Other applications: ⓘ

  [ongoing] com.adobe.CCLibrary.245152

  [ongoing] com.adobe.CCXProcess.244832

  [operation] com.adobe.acc.AdobeDesktopService.188512.44FBD85A-8E2E-428E-B81D-F20C5A23CBF2

  [ongoing] com.Adobe.accmac.232352

  [ongoing] com.etresoft.EtreCheck.236512

  [ongoing] com.getdropbox.dropbox.284192

  [ongoing] com.google.GoogleDrive.62112

  com.native-[ongoing] instruments.NIHardwareService.230112

  [ongoing] com.wacom.TabletDriver.285792

  [ongoing] com.wacom.WacomTouchDriver.285152

  com.Wacom.wacomtablet.282912 [loading]

  [ongoing] JP.co.Canon.cijscannerregister.298272

  [loading] 408 tasks Apple

  [operation] 181 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  OVSHelper: 1.1 (2012-01-17) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-20)

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2015-12-17) [Support]

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-06-30) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-24), [Support]

  AdobePDFViewerNPAPI: 15.016.20045 - SDK 10.11 (2016-06-02) [Support]

  DivXBrowserPlugin: 2.2 (2012-01-17) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-20)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-24), [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  SharePointBrowserPlugin: 14.0.0 (2012-01-22) [Support]

  AdobePDFViewer: 15.016.20045 - SDK 10.11 (2016-06-02) [Support]

  EPPEX plugin: 4.1.0.0 (2011-07-27) [Support]

  JavaAppletPlugin: Java Update 7 60 (2014-06-20) check the version of

  User Plug-ins internet: ⓘ

  Picasa: 1.0 (2012-05-25) [Support]

  Web of Google Earth plugin: 7.1 (2013-10-08) [Support]

  3rd party preference panes: ⓘ

  DivX (2012-01-17) [Support]

  Flash Player (2016-06-14) [Support]

  Growl (2012-01-22) [Support]

  hueyPRO (2009-03-12) [Support]

  Java (2014-06-20) [Support]

  WacomTablet (2015-12-17) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 612,69 GB

  Destinations:

  Elements [Local]

  Total size: 2.00 TB

  Total number of backups: 96

  An older backup: 12/24/14, 04:30

  Last backup: 01/07/16, 23:33

  Size of backup drive: adequate

  Size of backup 2.00 TB > (disc 612,69 GB X 3)

  Top of page process CPU: ⓘ

  28% mdworker (3)

  3% kernel_task

  2% WindowServer

  Service Office adobe 1%

  0% fontd

  Top of page process of memory: ⓘ

  989 MB kernel_task

  Mds_stores 295 MB

  Dropbox 197 MB

  197 MB Google Reader

  172MO Finder

  Virtual memory information: ⓘ

  4.24 GB of free RAM

  used 7.75 GB RAM (2.43 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  July 2, 2016, 12:11:12 AM self-test - spent

  July 1, 2016, 10:39:04 PM/Library/Logs/DiagnosticReports/Adobe InDesign CC 2015_2016-07-01-223904_ .hang [deleted]

  / Applications/Adobe InDesign 2015/Adobe InDesign 2015.app/Contents/MacOS/Adobe InDesign 2015 CC CC CC

  July 1, 2016, 10:38:57 PM/Library/Logs/DiagnosticReports/Adobe Photoshop CC 2015_2016-07-01-223857_ .hang [deleted]

  / Applications/Adobe Photoshop 2015/Adobe Photoshop 2015.app/Contents/MacOS/Adobe Photoshop 2015 CC CC CC

  July 1, 2016, 22:36:42 ~/Library/Logs/DiagnosticReports/CEPHtmlEngine_2016-07-01-223642_[redacted].cra sh

  com.adobe.cep.CEPHtmlEngine - tmlEngine 2015.app/Contents/MacOS/CEP/CEPHtmlEngine/CEPHtmlEngine.app/Contents/MacOS/CEPH/Applications/Adobe InDesign 2015/Adobe InDesign CC CC

  June 29, 2016, 08:14:10 PM/Library/Logs/DiagnosticReports/Adobe Photoshop CC 2015_2016-06-29-201410_ [deleted item].cpu_resource.diag [details]

  Try to leave Adobe Indesign and Photoshop. They break.

• 29,0 is too slow and continues to return when using of 28.0 Grrrrr!

  29,0 was too slow and too jerky. I returned to 28.0 and it was fine until 29 reinstalled on its own. I checked about: config and everything everywhere was assigned to prevent back but he did anyway. Sorry to his coarse, but what gives? I had deal with this as it has evolved. We should always be able to choose, right?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• The response of Mac is too slow

  The response of Mac is too slow, I have to reset DRAM, RAM, or memory NVRAM?

  Or y at - it another way to solve this problem?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information

• Error in mmcbase. DLL when opening administrative tools

  I get the following error message when you try to start a number of administrative tools: -.

  "The procedure entry point? PickIconDlg@@YGHPAUHWND__@@PAGIPAH@Z could not be located in the dynamic link library mmcbase. "DLL"

  Title of the message box is "mmc.exe - Entry Point not found".

  What can I do to fix this?

  I downloaded my SP3 mmc.exe on my SkyDrive and you can download it from this link:

  http://CID-6a7e789cab1d6f39.Office.live.com/Browse.aspx/.documents?UC=0&WA=wsignin1.0&SA=800701983

  If there is a problem downloading, let me know because I'm not too sure about this thing of SkyDrive yet.  It appears, it will warn you about a risk when downloading executables, but you can trust me...

  You need to replace c:\windows\system32\mmc.exe

  Make a copy of your current mmc.exe file somewhere a course, just in case you need to put it back.  If something went wrong with your SP3 update, you have still some other discoveries later.

  It's no surprise that run sfc/scannow was no difference because sfc/scannow concerns only on files in this folder:

  %SystemRoot%\System32\Dllcache

  Running sfc/scannow is a waste of time for system problems (unless you want to check your dllcache folder) as it will not update/replace any file (s) in another system folder (this is why I will never even move for the problems of the system).

  Let's see how it works.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• How can I remove the Administrative Tools, network connections, printers & Fax and scanners and cameras my desktop icons?

  Recently, I installed a trial version of Tune Up Utilities 2009. During one of the scans/tune-ups, he gave me the option to display the Administrative Tools, network connections, printers & Fax and Scanners & cameras icons on my desktop. I checked ok, however, now, I think it's too crowded in my office and you want to remove them... right on the desktop, not everywhere else they are located. I tried everything I know to remove them without success. Anyone knows where is the menu option to display on the desktop so I can uncheck or choose Delete? I don't want to have to change all the .ini files or .bat to because I'm afraid I don't do it correctly and create other problems.

  Hello tellis1230

  I don't know what you have tried, but have a look here

  Right-click Desktop-desktop/properties/Office/Customization

  Uncheck what you don't want

  .