Schema OCSSEARCH

Similar Questions

• How will I know which encryption scheme is used for a partially encrypted connection?

  When you access a site that contains unencrypted items, technical details by just looking at says "Connection partially encrypted". Although it is useful to identify it, is what I would really like to know which encryption scheme is actually used for the encrypted page elements. Is there a way to do it, and, otherwise, it would be something that could be considered as a feature?

  The images show joined the difference in the information available for encrypted partially connections.

  It will be possible to inspect this information via the "network monitor" in the development tools of firefox in a next version of the browser (on firefox dev edition which is already implemented).

• How to encrypt a USB, when I get the message "(GPT) GUID Partition Table partitioning scheme is required? '."

  I just tried to encrypt a USB drive with my Mac book (latest version) and got the message "A GUID Partition Table (GPT) partitioning schΘma required." What does this mean and suggestions on how to proceed?

  The drive must be formatted for Mac. Start in the Recvery mode. Erase the drive using disk utility (select the top icon which represents the entire disk and click clear. Partition scheme must be Mac OS (Extended) first partition GUID, which is the default value.

  If you want to install a system on it follow these steps:

  How to reinstall OS X on your Mac - Apple Support

• Trouble installing EL Capitan. Drive uses the GUID partition scheme

  Hello world

  I am installing an SSD on a Mac book pro 2011. I had been using the separate (Samsung ssd 830 256 GB) ssd (OS not installed) drive on my computer windows yet. I have created an El Capitan installation on a USB drive, swapped the hard drive on SSDS. I open at startup disk utility, erased the drive samsung with format: extended OSX journaled.

  Then returned to install El Capitan, but the Samsung SSD is grayed out and when I click it, it says "this disc is not use the GUID partition table scheme." Use disk utility to change the partition scheme. Select the drive, click the partition tab, select the volume configuration and then click options"

  However when I return to the disk utility, then select Samsung SSD, the partition tab is grayed out and cannot be selected.

  I don't know how to proceed. I would greatly appreciate any help

  Thank you

  .

  You must select the drive icon above the volume icon, that is selected in the screenshot.

• What partition scheme must be used to format a disc?

  When reformatting a disk with disk utility, there are three available partition schemes. Who should be used to format an external drive that will be used for files, no backup?

  OS X prefers GUID (or it can be called GPT).

• Setup Active Power Scheme for energy saving by program

  Hello

  I am a software developer and I would like to create a small utility for myself which can change and set the active power for Toshiba Power Saver utility mode.

  There is a function of Platform SDKs 'SetActivePwrScheme' to do a similar thing

  http://msdn.Microsoft.com/library/en-us/power/base/setactivepwrscheme.asp

  but it works for windows only, builtin power plans not for Toshiba Power saver.

  Is it possible to put the active scheme of the Toshiba Power Saver utility?

  Thanks for the advice in advance:

  Kazi

  Hi Kay

  This is a forum for users and users of the community try to solve common problems, share their knowledge and discuss technology.
  I'm not sure that you will find an answer to your question here in the forum. It is more a question for programmers.

  In addition I don't think you'll find any saving code details. I think that these internal and non-accessible information for everyone.

• Satellite L350 - drive DVD Toshiba turns off my color scheme

  Hi all. I use a Satellite L350 with Vista Home Basic.

  According to the instructions on the help page of DVD player I have the color scheme defined in Windows Vista Standard and the display settings to the highest (32 bit), but DVD player insists on changing the Windows Vista Basic color scheme.

  I have looked through the settings for DVD playback, but could not find something that looks like it could remedy this. Everyone knows this or knows how to fix it?

  Thank you!

  Hey Buddy,

  I don t use a reader DVD Toshiba but have you tested another software? You can use VLC media player for example. He plays a lot of audio and video files and it freeware tool. I like it a lot because it of smaller and faster than other players.

  Just use Google to find. I guess that you will be satisfied too. ;)

• Convert a Macintosh HD to the MBR to the schema GUID

  My drive hard macintosh is installed on a 1 TB drive that has a MBR partition scheme. Currently, I run snow leopard 10.6.8. you want to upgrade to el captain. When I click the installer I get a msg "this disc does not use the GUID Partition table schema. Use disk utility to change the partition scheme. Select the drive, click the Partition tab, select the configuration of Volume and then click on Options". but as u see my screenshot below the 'options' tab is grayed out. How should I proceed? If your answer is to reinstall my os x or re-partition my drive... Please explain step by step because I am a beginner on mac. also I don't have a startup dvd for snow leopard.

  FYI: I backed up my data using TM and super duper (Smart Update) to the same external hard drive.

  

  You will have to reformat the hard disk to change it from MBR to GUID.

  When you that all data on the hard drive with deleted then save whatever it is, you want to save first.

• Schema of database for the processing of the results

  Hi all

  I have a question on the results of teststep registration in the database. I use the generic recordset as my database for the recording of data.

  In my database (SQL Server), there are the following diagrams: dbo, dbtest1, dbtest2. I created all the tables of results (UUT_Result, Step_Result etc...) of the generic Recordset object in all schemas. Therefore, to display the results in the table of Step_Result, I specify the schema as well as the name of the table, for example SELECT * FROM dbtest1. Step_Result.

  Is there a way to tell Teststand to save the result in another schema (dbo, dbtest1, dbtest2) programmatically?

  Yours sincerely,

  chati

  Yes, the tool is easier to visualize what makes SQL. A user can access patterns as much as they have permission for. The problem is that, in order to specify the schema, you must assign the rating on your SQL commands. I don't know of an easy way to do this in Teststand.

  If you manually create the SQL commands is noted:

  [Database]. [Schema]. [Table]

  It is easier to implement multiple user names and to use the default schema to define.

  You can also have a database that is different for each category of journaling (and no need to use patterns at all).

  A lot of good information here:

  https://TechNet.Microsoft.com/en-us/library/dd283095 (v = sql.100) .aspx

• Creation of double page layout for use in schema

  Hello

  Could someone briefly get thorugh the steps to create a double page layout after EM simulation for use in a scheme to fill the localized elements and active device for a simulation of power amplifier in terms of layout? (I know it's possible in an another, popular EDA tool where the look of the layout as will have ports to the places where the discrete elements are to be connected)

  Thank you much in advance.

  Hey Jake,

  Use the wizard symbol generator: in the project tree, open the node of assistants and double click on symbol generator.  You can find information about how to use the wizard for help (search for "symbol generator" without the quotes in the index), or online at https://awrcorp.com/download/faq/english/docs/Users_Guide/i488885.html#symbol_generator.

• Database schema error - 2147467259

  Hello community,

  Using 32-bit Teststand 2014.

  When executing my movie file, a digital step in my sequence failed.

  After the failure of step, accordingly, my sequence stops the test and run cleaning.

  I'm then prompted with the error message, see image attached, when Teststand save my data in the database.

  I opened my database SQL and noticed that all the previous steps "Spent" have been registered in the database fine but the step failed has never been registered.

  My scheme is configured to record the steps Passed and Failed.

  I solved my problem.

  I had the STEP_RESULT measured value starting from the game as a float of patterns of treatment results, but the step which has not led to a NAN value.

  I changed the value to a string in order to manage the numbers and strings.

• Scheme in pdf format: help

  Could someone who has with the toolkit LabVIEW NXT turn the block schema of this file into a .pdf file, so I can use it in my powerpoint?

  I found someone who has solved it for me. Sorry to bore you with my problem, I was panicking, but everything is fine now.

  Thanks and sorry again

• Schema (xsd) for tag CVT file

  Where can I file the .xsd to loaded or unloaded tags files by / stored in the library of dashboard values (CVT)?

  I have an urgent situation.  I am the head of software for a machine control project which relies heavily on the possibilities of client configuration and management tags.  I proposed an architecture that included use of CVT, CCC and TCEs to manage configurations; only to find the update of TCE broken v2.x compatibility XML with FPC.  The project nor to update the CVT to remedy this situation does not seem to make a lot of progress, so I have to workaround to meet my fashion calendar.  My plan is to use an open source or COTS XML tool for managing configuration rather than traditional cultural expressions.  However, I need a copy of the xsd to a solution that is consumable for the customer.

  Where can I find it?

  Side note: I noticed similar questions for the other components of LabVIEW.  I suggest you post drawings and standards in an area of document decible.ni.com.

  deepforge,

  You have read the following information? http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/converting_data_to_and_from_xml/

  At the end it says the following:

  XML schema for LabVIEW

  LabVIEW converts the data to an established XML schema. Currently, you cannot create custom schema, and you can't control how LabVIEW tags each piece of data. Also, you cannot convert any screws or functions in XML.

  The predefined XML schema used by LabVIEW is LVXMLSchema.xsd located in the labview\vi.lib\Utility directory. You can open the file in a text editor to read the schema.

• Deployment of a new scheme of database on a Test System?

  Hello

  I created a new MYSQL schema (on a development machine) I want to deploy a number of test systems.

  What is the best way to do it? Is there a file somewhere in the directory of TestStand I can copy?

  Thank you best regards &,.

  Don1.

  I don't think that you are correctly using the schema definition. The scheme applies only to the database. The schema does not exist in TestStand and you do not the schema port anywhere except if you want to install a new database somewhere database options for a specific read/write database schema are stored in the TestStandDatabaseOptions.ini file and you can choose to include this point in a deployment.

• 2012 TS SP1: STEP_Result recording always fail in a database MySQL (standard schema)

  Hi all

  I use TS 2012 SP1 to perform very simple sequences (some sequence calls in the same file and a few simple tests without adapters) with the sequential model (see attachments). Each time database record step fails with the error-2147352567 on instruction STEP_RESULT.

  This means that I can not connect my my MySQL 5.2 database stage results (UUT_RESULT seems to be saved...).

  My configuration is:

  • Win 7 32 bit
  • 2012 TS SP1
  • 5.2 MySQL + ODBC connectors

  The database was built using MySQL Workbench using the sql file in the components folder of TS.

  Under TS, the scheme used is a simple duplication of the MySQL Insert Diagram delivered with TS. (see attachments).

  No idea what's going on? No work around?

  Fixed a problem!

  I've updated the MySQL ODBC version 5.2.5 (instead of 5.2.4) driver and the problem disappeared!

  Thanks for the help.