Similar Questions

• After you install a new copy of Windows 7 and updates, download now not a genuine copy

  I installed a new copy of my subscription to windows 7 pro N everything worked ok until he says is not a genuine copy, I got here with my subscription then done some update so why might occur

  Hello

  Have you replaced any hardware, or reinstalled Windows 7?

  It is possible that the store of licenses of Windows 7 may be damaged or unreadable. Try the steps below to re-create the store.

  (1) open an Internet browser
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop sppsvc (it may ask you if you're sure, select Yes)
  Note: the Software Protection service may not be running, that's ok.
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start sppsvc
  (10) type: slui.exe
  (11) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can
  happen automatically.

  If you have a product key, you can re-enable Windows 7.

  1. click on the Start button
  2. type: slui.exe 3 and press the Enter key
  3. Enter the product key from the sticker on your computer
  4. click on the next button.
  5. you will be asked if want to enable, click ok

  You can also activate by phone as follows:

  1. click on the Start button
  2. type: slui.exe 4 and press the enter key
  3 select your location from the menu drop-down and click on the next button
  4. the next screen provides the number to call to activate by phone

  How to contact a Microsoft Product Activation Center:

  http://support.Microsoft.com/default.aspx/KB/950929/en=us

   
  For reference:
  Refer to I see messages that Windows isn't genuine. How can I solve this? from the following link and check:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ
   
  Hope this information helps.

• Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.

• Add ons said display Adobe Flash Player RealNetworks (tm) RealDownloader PepperFlashVideoShim plugin out date even after I have download and update. It s

  I have the version 1.3.3.66 Adobe Flash Player RealNetworks (tm) RealDownloader plugin PepperFlashVideoShim., which is obsolete. I click "update now" and go through the process installation, but after that it says always "obsolete" and "update now".

  Also have Adobe Flash Player Shockwave Flash 18.0 r0, which was recently updated.

  Should I just delete the RealDownloader?

  Thank you.

  Pepper plugins are not used by Firefox.

  This API is for Chrome and Opera browsers, and it should not even appear in a list of Firefox Plugins or the Manager of the Addons > Plugins. It is a 'fault' or a Bug in the installer and must be fixed by Real Networks. My advice is to just ignore it.

  Now, if you see this message here - http://www.mozilla.com/en-US/plugincheck/ - can provide you with a screenshot of what you're watching?
  He could help us if or when that happens in the future.

  See this support article.
  How to make a screenshot of my problem?
  It is best to use a type of compressed as PNG or JPG image to save the screenshot and make sure you do not exceed a maximum file size of 1 MB.

  Then use the button Browse... below the text message response area to download the screenshot.

  This Plugin Check page was performed on all browsers of 'service', but has recently Mozilla Firefox only and they cannot switch off analysis for API extensions for other non - Mozilla of. IOW, do not allow a person who uses IE to use the Web page (as I just experienced when I used IE here), but the scan stiil looking for ActiveX and pepper API 'plugins' in the registry?
  Perhaps "other browsers" are disabled temporarily because of the recent eruption of updates Flash and Mozilla blocking the exploited, older versions of Flash, and once things return to normal on this page loads they intend to allow "other browsers" to access this page?

• Impossible to download and update the app on the iPhone 6 Plus

  Topic: impossible to download and update the app on my iPhone 6 Plus

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

  I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

  You can only change the update channel if you uninstall Firefox and remove the Firefox program folder or install a beta version or release that copies a file new channel - prefs.js. Update Firefox never changes the update channel. Only a full installation will do it.

• ITunes ask me to download and update my iphone to ios9.2.1.  I am already updated.  I'm afraid to download it again - don't want to spoil anything.  I hit Cancel.  Why he doesn't already know, I'm updating and what should I do?

  ITunes you ask me to update my iphone to ios9.2.1 6.  My phone is already running on 9.2.1.  I'm afraid to download and update again - don't want to spoil anything.  I was just hit Cancel.  He returned whenever I plug in my phone.  Why he doesn't know he is updated?  Thank you.

  Apple has released a patched 9.2.1 iOS they have two different numbers. This update is possible only via iTunes and the computer. It is to remedy the situation of error 53. Go ahead and update the latest version. It is completely safe to use.

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista business is update, download and installation; even when the update is set to manual.

  I put the manual update manually. But despite this it keeps update, download and installation. Sometimes I turn off a few updates and suddenly, after a few hours, these unwanted updates begin to update! This is a joke, very annoying and the invasion of privacy!

  Could be group policy... .getting applied on your system... Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Windows XP Pro SP2 32-bit: when Microsoft Updates downloads SP3 and install it. How can I fix it? Thanking you in advance.

  I have Windows XP PRO 32-bit SP2, and when Microsoft Updates downloads SP3 for me and I install it, it stops at about 1/3 of the way and says: "unable to load the catalog files. He also partially installed SP3 and Windows XP PRO may not work correctly. I tried to install SP3 several times and always, he stops at the same point and said the same thing, "failed to load the catalog files. How can I solve this problem?

  Yes, this is the same computer as in the other thread. Thanks a lot for answering my question and come to my aid. I had the SP3 for XP update to install by doing a full installation of microsoft IT. Before your answer another suggested answer. Once again thank you!

  P.S. I installed kb971029 as you suggested, I also got malware & spyware, I have anti-virus Protection

• Windows Update download and install when my PC is in mode 5000mAh?

  Will windows update download and install when my PC is in mode 5000mAh?

  Hi Hassan,.

  You will not be able to plan / run Windows update in standby mode. It can be in "idle" mode or when executing system.

  I hope this helps.

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.