SCO compliance issues

Similar Questions

• EDL compliance issues will never end?

  

  The top tether in the screenshot is the clip that is generated when I load the EDL.

  The Middle clip, that's what I get if I go directly to the drive and import the sourcr.

  Background clip is what happens if I create a link to the file that was in the lead.

  WHY! Why my entry and points instanty changing media start and end as soon as I re-edit the link? Why change the duration?

  Here are the events of the EDL

  008

  AX V

  C

  20:11:06:17 20:11:09:02 01:00:08:01 01:00:10:10

  * THE NAME OF THE CLIP: A001_C015_0821KD. MOV

  CS6 Mac

  Of course, we paid Adobe support. I'll send this question on their way.

  Thanks for letting me know that this is not an official support channel.

• vSAN RAID controller compliance

  Hello

  I improved vSphere to 6U1/vSAN 6.1 last night and everything went very well - happy days. I noticed that the new plugin of the health has reported a compliance issue with my Raid Controller driver version. Either way, I'll have a latency intermittent host at this time and I think that this could be the culprit. I'm totally confused however as what needs to be installed. Before you deploy vSAN (about a month), I've updated through iDRAC all devices on my Dell R720xd 3 including RAID - H710Mini PERC controllers.

  vSAN THAT HCL needs:

  Firmware: 3.131.05 - 3415

  Pilot: megaraid_sas version 6.603.55.00.1vmw

  I need to reboot the servers to check the firmware version as iDRAC States 21.3.1 - 0004, which is apparently, according to this thread of dell, the version of the package, but assuming that the firmware version is correct, it leaves me with the driver update to version megaraid. I use a Dell ESXI ISO's so my question is, where can I get the megaraid driver and how do I install it in ESXI?

  Any help would be massively appreciated.

  That scrap. I've upated the "copy local HCL DB" and then ran a new test and everything is in line/green so everything seems fine!

• Pavilion x 2 detachable 10-n123: cable USB of Type C on Pavilion X 2 detachable

  I bought a cable USB of Type C on Amazon to use with my Pavilion x 2. When I plugged the end of type A into a charger that I and the end of Type C in the 2 x led light white next to the USB port on the x 2 briefly flashed on and off.  When I plugged the Type a end on my desktop and the end of Type C in the 2 x I got the same result.  I tried another cable of Type C with the same result.  In one of my essays (I think it was plug the charger with the x 2 running) I ended up getting a message on the x 2 on the corruption of the BIOS and I had to go through a process using a Bitlocker code to restore the x 2 in working condition.

  The 2 x charge very well with all cable/adapter shipped with the x 2.  I want just an alternative.  I don't want to depend on a single cable.

  Two cables I've tried has received very positive reviews from other users on Amazon.

  The x 2 only works with the cables of Type C from HP?  Or something is wrong with my x 2?

  I realize that I just wanted to know if she would still charge after that.

  Also, in the Amazon reviews, there are lot of people having a similar trouble their features of loading with the version cable issues. It seems that there are compliance issues at the present time, manufacturers are still sorting.

  You can have one of these bad cables?

  Cable questions seems to replace the cables at the request of customers.

  Other than that, I can't tell you, it would be a total guess. I'm sorry.

• Desktop H500s put in the disk hard windows 10 from another OPERATING SYSTEM PC - ERROR CODE 1962 - No.

  I tried to replace the current hard drive with the disc provided with windows 10 from another PC.

  I have is after having swapped the hard drive. The system cannot load Windows 10 and displays this message "ERROR CODE 1962 - No. OPERATING SYSTEM".

  The main reason I like to swap the drive is because it is a larger and faster disk and it come with Windows 10 Enterprise license. Instead of my current hard drive of Levono who only 8.1 Windows

  I understand that the pilot is maybe a problem. But, I should at least be able to see the Windows screen and I can fix it the driver, instead of the message "ERROR CODE 1962 - No. OPERATING SYSTEM"

  Note: I did I tried to put this disc in the CD player, I've found, it can read the disc. Therefore, should not be SATA non-compliance issue.

  Any suggestion?

  Hope to hear the suggestion

  Dear all

  I managed to fix in Boot "Disable UEFI and activate the legacy", my system is running. I just need to install the audio driver after the system is running

  Usefully it doesn't matter who will help to have the same problem

• Export is being poopy

  I have a vid of 6 min HD1080P 29.97 FPS. Piece of pretty standard interview with no f / x beyond a casual crossfade. It is rendered.

  No matter what settings I try, it error. I want it to youtube and to work on a flash drive, so do not need high-quality.

  I followed the tutorial on this site and followed by some parameters tutorial youtube but I got nuthin'. Always error.

  Popup = 'film compilation error. Unknown error.

  I had a few months when I exported this vid even too. After about 6 tries somehow I understand. Unfortunately I'm not saving the settings.

  H.264

  HD 1080 p 29.97 (source record matches)

  export of video & audio

  video

  level 4.2

  NTSC

  return the maximum depth

  VBR 2 pass

  target rate 9 MB, max 15

  audio

  4800K, high, 192

  haven't touched filter, multiplex, ftp or Legend tab

  I even tried "match source" button. No dice.

  Help me Obi Wan. You're my only hope.

  Without knowing the error of your ways. Make the sequence in Media Encoder.  It owes.

  Should the dark forces persist.  Then trans-code of the media in a format native to avoid compliance issues and continue the trip.  Isn't it?

• Configuration Manager Manager and update

  Hi all

  What is the difference between Configuration Manager and Update Manager?

  Thank you

  Djamel

  Hello

  They are certainly different products from Troy, but both have their uses for security. VUM is necessary to determine the status of patches and fixes, while configuration manager will monitor your systems configuration drift (to some extent) is Host Profiles. But Config Manager monitors your systems for both compliance issues.

  The two types of tools are necessary for good security.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Consistent capture of PRE 7.0, & Questions of edition

  I have a new HFS100 Vixia Canon (AVCHD) and you have installed Premiere Elements 7.0.   Previously, I used a mini-Strip definition camcorder Standard and editing the videos with Windows Movie Maker or Cyberlink Power Director.

  Capture issues:  The media AVCHD import option does not require a fire wire / or provides the remote control.  (I LOVE this feature since I bought a camcorder with flash memory cards so that I could import the media thanks to a reader of cards instead of having to plug the camcorder).  I realize now, but can I also want to import a small segment of a longer scene.  The function to capture AVCHD should have control of the aircraft? If not, can I use the capture of HDV camcorder rather function? Requires my project settings settings?    

  Compliance issues:  After I imported the .mts files, PRE 7.0 automatically goes through a process that says: it is "consistent" files.   Which means "compliant"?  This requires settings of my project settings?

  Questions of edition:  .Mts scenes can be read without SEVERE stutter.   Audio is fine, but the scenes video looks individual distillers with 10-15 second delay until the next image.  Although I plan to upgrade my laptop powered laptop 1 GB RAM to a much longer next month, I'm despearate to edit and publish my first series of videos because they are videos sales of horses, that I'm selling.  Can I do to allow me to edit the files .mts with my current RAM 1 GB system?  I would be happy to drop a quality any setting video just to get this batch of videos edited and produced.

  Thanks in advance for your help.

  Is there anything I can do to allow me to edit the files .mts with my current RAM 1 GB system?

  While the additional RAM will improve your experience of likely change, it is the CPU that gets stressed with AVCHD. What CPU type and speed of your system has. Many strongly suggest a Core2 Quad as the minimum CPU for AVCHD.

  This ARTICLE can help you set up your computer for editing.

  Good luck

  Hunt

• RV320 Cisco Remote management fails PCI compliance

  Cisco RV320 (port 443) remote management not meet PCI, a major provider of PCI (Trustwave) compliance.

  Fault issues:

  1. Taken SSLv2 support (http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2005-2969)
  2. Methods HTTP Trace/track activated (http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2004-2320, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-0386)
  3. HTTP Server overlapping Byte - Range Denial of Service (http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-3192)

  Other serious issues:

  1 auto-Completion enabled for password fields

  2 SSL certificates with a public key of less than 2 048 bits are more susceptible to man in the middle attacks (Yes, I can create a new certificate with > = 2048 bits, but the value default self-signed certificate must be at least 2048)

  If you have warranty still valid for your RV320 device, I suggest you address these issues directly to the Small Business Support Center (HWC) through their customer service system. Because they are related to safety concerns AND the RV320 device is not on the list of EoL in the meantime, I hope that this could be addressed and fixed in future versions of firmwares for this device.

  I'm afraid, nobody else on this forum could forward your question here on the forum that these options are not configurable (at least not officially) and must be set only at the level of the firmware. You must use the official channels to facilitate this correction.

• Issue of Posture 1.3 Cisco ISE.

  Hi all

  Small issue: assessment of posture for ISE customer how you configure ISE to use several AV vendors?

  Example: I have configured ISE posture rating for Sophos AV definitions that works well, if I have introduced another provider of antivirus for the posture of the client assessment does not pass compliance because she's trying the two AV vendors? How do you ensure ISE verifies and marks as consistent customer for each suite AV?

  Clients use AnyConnect V4.

  Thanks in advance for any response.

  Actually, after checking I don't think you can use two terms consisting of the VA, in another State, so you will need to create it using both your requirements in the same requirements, and then select "any condition to succeed", only problem is that you can have as a repair action, which can be a problem.

• How to set the duration required for a course of compliance

  I am creating a compliance courses, and participants must participate for 60 minutes in order to meet compliance requirements.  Is it possible to load how learners time stay on each slide, or in the overall course?

  You can store the time spent in a user variable and when the user leaves the course, issue a warning if the elapsed time is less than 60 minutes. You can use the interaction Timer or hourglass to show the time elapsed to the user. There is no way to 'load' However, I understand the meaning of this word because I'm not native English.

• Google Apps HIPAA Compliance form

  Someone at - it a Google Apps administrator and encounter a problem being able to sign the form BAA to complete compliance HIPAA in Google to work?  I followed all the steps, in order, but cannot sign the form with method option.  I took the following photos with my phone, screenshot would be not to catch the "no" circle in the Type text box, and the second image doesn't watch that apply the button remains grey after drawing a signature.  I've already reached out to Google, but they had no other reports of this problem and could not provide extra help, even after the replication of the question.  Finally, is about a related issue of the computer/browser/network/firewall, I tried on multiple devices in multiple locations, exactly the same problem each time.  This is very important for my client to get resolved as soon as POSSIBLE. Thank you!

  

  staring at me.

• Errors of unknown compliance for Server e-mail and ds2webb/c

  I hit on all the issues listed in the guide for troubleshooting and down to stay a few elements.  In my last run, I had 5 issues of compliance on a single mosaic:

  Tile0-mailserver-p2

  Tile0-olio-p2

  Tile0-dvdstoreB-p2

  Tile0-dvdstoreC-p2

  deploy

  I think I've fixed deploy them by putting an IP address in the customization to deploy.

  OlioWeb0.wrf beginning of disc error reports.  I increased the disc Go 70, a 100 GB and rerun currently to see if that fixed it.  If there is a better solution, I am open to suggestions.

  I have not any ideas on the mail server or chess dvdstore.

  The only possible issue I see in the mailserver0.wrf is that the actions of mail and the folder are 0.  No idea how to fix this if it is the question.

  The only thing I see in dvdstore wrf files are the entries: newuserxxx user name already exists, where xxx seems to be a random number.  These messages increases with the frequency under test.

  Any help would be appreciated.

  Thank you

  Steven Walker

  I have found the answer.  Will know for sure in about 3 hours.

  I honly had about 1 GB of free space on client0 fo.  I forgot to clean up the exchange and cygwin installation files.  Clean up these released an another 1.7 GB for 2.7 GB of space.  My guess is that if the client0 lack of space, we could see this question.

• We have problems with Adobe Acrobat DC - document cloud services and how it relates to the HIPAA.  Everyone is working through these issues?

  We have the Cloud of Document with Acrobat DC services issues.  We are considering turning off the cloud feature to stay in compliance with HIPAA.  Everyone is working through these issues?

  Hi mikem82897618,

  You can view the following link to see what can be done with Adobe Document Services cloud when you work in Acrobat DC:

  Store files online, share & access wherever you are. Adobe Acrobat.com

  Also, visit this link to learn more about how Adobe Document Cloud services comply with HIPAA security standards:

  Signatures digital signatures electronic vs. services of Adobe eSign

  Please specify the same details why you should turn off the cloud feature.

  What and where exactly are you facing trouble?

  Let me know.

  Kind regards

  Ana Maria

• features of the client ntp ESXi (interesting compliance requirement)

  Hi guys,.

  I was thrown an interesting compliance of a customer requirement. They demand that all averaged over servers ntp NTP updates (preferably 3) 2 (a particular layer, although I don't think this would have a bearing on the issue).

  Indeed, they want to question several NTP servers, the average of the difference between the updates provided by all servers then drift in that direction. Apparently, this is the normal behavior for the ntp client HP NonStop they use and must find a way to do it on all the other guests.

  I trawled autour and couldn't find an easy way to do this with esxi ntpd uses. The best I could think of would be to have infrastructure ntp sync for that provide customers (esx), but from the perspective of compliance that would not be cut.

  Apparently, it is a common requirement of compliance for the financial houses - anyone otherwise run into that, or have a solution?

  It seems that one of these requirements that no one knows everything

  As usual, all thoughts appreciated and rewarded with points

  The behavior you describe (drift toward the average of the reported servers) is the normal and expected of all implementations NTP appropriate.  (See http://web.archive.org/web/20100331222927/http :// www.sun.com/blueprints/0901/NTPpt3.pdf for an explanation of why this is the case - as part of the illustration on page 9 is one of the best things that you will ever make to understand NTP.)

  As near as I can tell, ESXi provides a fully operational server.  So all what you need to do is add three servers in the service host configuration screen and you will get this behavior.  You can verify the behavior by the running of "ntpq - pn IPaddress" from a local Linux machine against your ESXi host.  This is only an example of what mine looks like shortly after the time servers have been reconfigured and restarted ntpd:

  refid distance st t when poll reach delay offset jitter
  ==============================================================================
  192.168.240.254 203.192.179.98 3 u 37 64 101 1,229 60465,5 30179.7
  192.168.240.5 203.31.84.4 3 u 96 64 37 0.269 60338,7 30169.5
  192.168.240.249 192.189.54.17 3 100 64 37 0.229 u 60338,8 30169.4

  This server has been slower than the actual time of about 1 minute (60 000 milliseconds) and should start to drift toward it once it is synchronized to the top.

  Kind regards

  Paul