SCORM 1.2 compatible output

Similar Questions

• CM1312 dark print color photos

  I have a brand new nfi HP CM1312... connected via USB and two PC network running family vista premium and latest driver from hp.com

  the photocopier and scanner produce likeness of good quality of the original in color or black and white.

  but when you print a photo in color of each PC output is too dark and too much green tint. 75% is probably the original brightness.

  There seems to be no available on the printer driver setting? the same photo printed on another printer (Inkjet) is very well...

  Here, the dealer says it's what this model?

  I thought at the time of WYSIWYG a new modern printer output would be at least as good as an older model... AND if the built-in scanner can produce almost 100% of the copies of the original, then the printer should also be able to as well...

  HELP SOMEONE

  ATTENTION DO NOT BUY THIS PRINTER IF YOU WANT A COMPATIBLE OUTPUT *.

  I had some 'fun' try to set the output to match the screen.

  The concession was not able to help or assistance HP or these forums. The dealer had the unit for two weeks to run tests and concluded that this is how the unit is. That I do not accept.

  Before holding the camera in I noticed that there is a small amount of adjustment available if you install the software from the CD provided, called 'Toolbox '.

  There is a parameter called "print quality" or something like that and inside, there is a list of parameters and a drop for each parameter. There should be adjustment of-5 to + 5 for each.

  I had some success using these to adjust the output closer to the screen, but not exactly. I'm not after photoshop quality

  But please NOTE

  The first time I installed the software toolbox and went to research it was only from-3 to + 5 available settings...

  I installed the new firmware, but did not see any change...

  He was similarly to the dealership where I returned the unit to complain, they found only-3 to + 5 available......

  but after his return set unity and settle all the different versions of the HP software for this unit found on the website of HP and then by reinstalling from the CD provided (back to basics) on 04:55 adjustment was available... (I don't understand, but...)

  so there you go... I'm not after photoshop quality as I said, but I expect my newsletters to be readable, including photos on it.

• How to connect laptop to TV screen

  How can I connect my laptop to my tv as a second monitor?
  I bought a hdmi connector, then I plugged it in the back of my plasma
  and I hooked the other end to my laptop. I hit fn + f4, but nothing happens.
  I was wondering if there is some experts then who can help and teach me
  How to connect my laptop to my tv for a better image.

  Thank you.

  Hello Meri_AOL,

  Thank you for using Microsoft Vista answers Forum!

  To connect your computer to a television, your computer must have a video port that matches one of the inputs on your TV.

  If your TV does not have a VGA or DVI input that matches an output on your computer, you'll need to use cables S-video or composite video. If your computer does not have one of these TV-compatible outputs, then you might be able to install a new video card that has the right connection.

  1. turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.

  2. connect the appropriate video cable from the video port on your computer to your TV.

  3. turn on your TV and set it to the input that matches the video port connected to your computer. You may need to refer to your TV user guide for instructions on how to do it.

  4 turn on your computer.

  You should see windows displayed on your TV.

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• I have two computer. TV and the model. I would like to have all my TV must come my comp. How is it difficult to do.

  I often hear about the cloud I have a duel core madia Center, how hard is it going to be to mak it my TV provider.

  Hello

  Method 1: To connect your computer to a television, your computer must have a video port that matches one of the inputs on your TV.

  If your TV does not have a VGA or DVI input that matches an output on your computer, you'll need to use cables S-video or composite video.

  If your computer does not have one of these TV-compatible outputs, then you might be able to install a new video card that has the right connection.

  You will need an HDMI cable to connect TV with laptop.

  Follow these steps to connect your computer to your TV:

  1. turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
  2. connect the video cable from your computer's output to your TV.
  3. turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
  4 turn on your computer.

  Method 2: Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

• What resolution should I set my screen before I connect to my TV...

  Ive tried mostve them and one of them I saw on TV (it's a screen samsung 69 inches 1080 p tv... and I know it works because ive connected before, but I forgot what to do to make it work), but when I connect it, it is upwards in Mode not supported... help please? I hate to play m games on this * fat dell monitor... (excuse my ASP) and I have a windows vista

  Hello

  Method 1: To connect your computer to a television, your computer must have a video port that matches one of the inputs on your TV.

  If your TV does not have a VGA or DVI input that matches an output on your computer, you'll need to use cables S-video or composite video.

  If your computer does not have one of these TV-compatible outputs, then you might be able to install a new video card that has the right connection.

  You will need an HDMI cable to connect TV with laptop.

  Follow these steps to connect your computer to your TV:

  1. turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
  2. connect the video cable from your computer's output to your TV.
  3. turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
  4 turn on your computer.

  You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably have to adjust the screen
  resolution in Windows.

  Method 2: If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Hope this information is useful.

• InDesign is pringing an incorrect image

  There are 3 designers who have the same problem among many others in the Department, each of them when you print a specific document from the same part of printer of the image is not printed correctly, it seems damaged or misaligned. When sending the image to another designer the document print perfectly. I reinstalled the printer drivers and paired the drivers used for the printer. I think it's a matter of adjustment, but I don't have the slightest idea what setting it would be.

  There are two documents. A bad positioning only part of the picture ever time it is printed in each of the 3 new designers, say, the page is 8/12 from 11 inches only 2 in the document the document prints correctly. B the document during a part of the image is rotating it shows normal but prints a white spot under an angle where the image was shot. Someone had a similar problem? Also, I know there is a workaround to export it to a .pdf file, but this is not an option for developers, unfortunately.

  I found a Post script printer driver # we use prints documents very well for the specific model.

  For this language PCL (Printer Control Language) drivers use the printer hardware to create some of the print data, usually graphic data such as filling boxes, highlights or fonts. This allows the computer treat the print fast and efficient job. The printer is then responsible to complete the creation and processing of the data on the page.

  PS (Post Script Language) it is widely used in the Macintosh platforms and to graphical applications in several platforms. Unlike PCL, Postscript is device independent. This means that the Postscript language creates all the print data and does not rely on the printer to print the data. This allow the compatible output when printing on more than one type of printer or the print device. Specifically, the graphical objects will be coherent and in some cases of better quality than PCL.

  As it seems that it is the answer to my question.

  http://www.laserquipt.com/support/IDX/0/063/article/PCL-vs-PostScript.html

• Captivate 5: 'Loading... '. "Screen

  Hello world

  I'm running a version of Captivate 5 trial for a few days, and I hope that someone could share ideas on how to remove this "Loading" screen... "gray.

  Whenever I publish a SCORM (1.2) compatible pproject, this gray screen always pop in or running locally or via our LMS. I noticed that when I release it without selected report it will not appear, so I suspect it's something to do with the SCORM setting in Captivate 5.

  I saw a thread similar here and apply what has been approved as a fix and secure solution but does not work either.

  Someone else who has ideas?

  Thank you.

  You are welcome Miguel.

  For everyone who faced this problem:

  -You can download the file "CaptivateMaintimeline.as" from here

  -Place this sheet to the address: : Files\Adobe\Adobe Captivate 5\AS3

  -Manish

  blogs.adobe.com/Captivate

• white box around video?

  IM create an ad for one of the sites of m using After Effects. The video must be no background and when I touch the video using keylight and export it, it has a white background around it... how can I get rid of the white background and make it transparent?

  You need to export with alpha channel in a compatible output format.

  In the output module, select RGB + alpha with premultiplied option, but you should make sure your target codec supports and is not too heavy for your Web page. In addition, you won't be able to 'see' the transparency in your video player (QT, VLC,...) you need to test directly in the browser (or import the video into AE to check if it is transparent.

• Customize the frameset tags

  I am trying to solve some accessibility issues and need to understand how to change the games of 'master' frames that RH x 5 uses to generate webhelp. I guess that there are masters somewhere (probably in XML files) but I can't find out where they live. I rather edit the master once so that the changes will apply to all webhelp files produced HR.
  
  I use the 508-compatible output, so there is no skin to apply.

  Thanks - I will try these suggestions and I'll look around for FAR.

• & lt; keyword & gt; in the imsmanifest.xml file

  Hello
  
  I get an error during the test of SCORM 2004 Captivate 2 output. I use the Suite of Test of ADL 1.3.3 (Content Package compliance test) to test the zip file.
  
  The error is:
  
  Summary of compliance tests metadata
  ****************************************
  Test the metadata with location of inline and parent identifier of captivate_2_scorm_2004
  The metadata is well formed
  Metadata is invoked by the control documents
  ERROR: Metadata is NOT valid against the SCORM Application Profiles
  The metadata does NOT contain the extensions
  
  When I opened the newspaper to detailed metadata, I see two cases of:
  
  Element < keyword > minimum compliance test
  Multiplicity of element < keyword > has been verified
  < Keyword > element test for the Type of LangString
  Multiplicity of element < string > has been verified
  'Language' of LangString Type minimum compliance attribute test
  Attribute multiplicity 'language' has been verified
  Length of characters for the 'language' attribute has been verified
  ERROR: No text was found in the < string > element and fails the test of minimum character length
  
  When I open the actual imsmanefest.xml file, I notice that there are two places with the 'key word' code. The first is the < general > section, and the second is in the < classification > section.
  
  Here is the text of the manifest file:
  
  < general >
  <>identifier
  < catalog > Adobe Captivate course < / catalogue >
  captivate_2_scorm_2004 < entry > < / entry >
  < / identifier >
  < title >
  < string language = "x-none" > Test Captivate 2 < / string >
  < /title >
  < description >
  < string language = "x-none" > Test Captivate 2 SCORM 2004 compliance < / string >
  < / description >
  < keyword >
  < string language = "x-none" > < / string >
  < / keyword >
  < / general >
  
  And here is the text of the other party which mentions < keyword >
  
  < classification >
  < object >
  < source > LOMv1.0 < / source >
  idea of < value > < / value >
  < / purpose >
  < description >
  < string language = "x-none" > Test Captivate 2 SCORM 2004 compliance < / string >
  < / description >
  < keyword >
  < string language = "x-none" > Adobe Captivate < / string >
  < string language = "x-none" > < / string >
  < / keyword >
  < / classification >
  
  I can change these in the imsmanifest.xml file, but my question is, is there a source file I could change so that I don't have to change every single manifest file for each project of cp I develop? Or, is there a place where I can enter the cp itself file values for these elements of language of string (I tried to add a description to the file > Preferences dialog description area and it had no effect).
  
  Thanks for any help on the files to change or to find out where to put the info in the cp file,
  Alan

  Thank you, Bobby.

  I returned and filled in the manifesto > courses > subject field in through the Quiz Manager and that solved this problem. The output is now fully compliant SCORM 2004 (subsequently TEN tests).

  Note that using only mentions this field is mandatory...

  Thank you once again and now I can recommend updating to Captivate 2 (more a few other licenses for other developers).

  -Alan

• ranking of values in SQL calendar

  Hi all
  
  I have a sql of base calendar, which is used as a list. There are only a couple of entries in each day showing the names of the people. I have a custom view by defining such that the name is highlighted in different colors according to their status of guard.
  
  My problem is that the calendar does not systematically display the values in a particular order and so, for example, in the calendar (monthly type) it might show:
  
  LUN - Red | Green
  Mar - Red | Green
  Sea - green | Red
  Thu - Red | Green
  Frid - green | Red
  Sat - green | Red
  Sun - Red | Green
  
  I am aware of a javascript sort() method but do not know how I would want (or if I should) implement this in my calendar.
  
  Ideas or suggestions out there?
  
  Thanks in advance,
  Mike

  Hi Mike,.

  Have you tried to sort the data in the SQL statement itself? I did a similar thing where not there had more than one entry per day and sort the data itself kept compatible output - make sure you sort by the first date field, and then by the name field.

  Andy

• Connection of several projects within a SCORM compatible LMS

  I'm close to here, but I don't quite get what I want. I hope someone can point to the "easy way" to do...

  I create a single course which is composed of several Captivate 5 projects. The user is branched to different projects along the way, based on the answers to the embedded questions (e.g. pass/fail a test). In the final project, I have a post-test. It is the only one to send a score to the LMS.

  So let's simplify by an example:

  • The user enters the Module 1 and takes a pre-test.
  • If they go with a certain score, they go to Module 3. If they fail, they go to Module 2.
  • If they are sent to the Module 2, they go to Module 3, when they have completed it.
  • In Module 3, they take a post-test and this score is recorded.

  It is easy to run this script on my desk. In a SCORM environment is taxing my brain.

  Currently, I publish each Module as its own SCO, keep the course ID and consistent title between them.

  I tried to use the Multi-SCO mode, but causes the entries in my LMS for Module 1, 2 and 3 separately. Not what I want.

  I tried to move the folders for Modules 2 and 3 to make subfolders of Module 1. This seems to work (I get an entry point of course, Module 1, and I'm dating the exact score of Module 3), however by examining the LMS reports, this translates into a figure artificially high "# access." The reason seems obvious: whenever I load the Module 1 is access, and then when I branch to Module 3, is another access, because really I'm reloading the page with a new module and manifest SCORM, right? In addition, I am a little worried that this kind of gerry-rig will break something.

  I don't really want to use the aggregator, because I don't want a table of contents - they should not have the ability to jump directly to Module 2, for example - but I tried it anyway. And I found that even if I can get it to flow the way I want to, I can't understand how to package the project aggregated in a SCORM manifest.

  There must be a way to do it. What Miss me? Is there something obvious that I'm not considering?

  Just to update anyone interested... I thought about it. As suggested, I had change the imsmanifest using the RELOAD file. Turns out to be easy enough, after a few annoying error.

  I put the details together here, including videos.

• I have a problem with the new version 5 of output is not compatible with the Google toolbar... and Google toolbar is important :(

  Please solve the problem of compatibility with the Google toolbar as soon as possible

  Google must update the program toolbar for Firefox 5.0.

  The toolbar 7.1.20110512W version works quite well in Firefox 5.0 using the add-on Compatibility Reporter. But not all features work 100%.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  http://GoogleSystem.blogspot.com/2011/06/enable-Google-toolbar-in-Firefox-5.html

  Google Labs is working on a version 8 GTB, but looks like he is not made for Firefox - just for Internet Explorer.
  
  http://www.Google.com/support/toolbar/bin/answer.py?hl=en & Answer = 1111588 #toolbar_info
  
  So, maybe Google will not support Firefox any longer. Maybe it's a gesture to force users of Google Toolbar on Google chrome, which I believe has all these built-in features.

• Is the Airport Express optical fiber compatible? (Verizon Fios)

  Is the Airport Express optical fiber compatible? (Verizon Fios)

  Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

  The airport is a router, not a cable modem. Verizon are likely to provide a cable modem that is also a router, and therefore has an entry for the cable and several outputs ethernet; It can also have wifi.

  You can probably turn off wifi if you prefer to use the airport; and there is nothing prevents to connect airport entrance to one of Verizon output using its wifi and ethernet ports. As long as it is reasonably recent, it should detect that it is connected to a router and configure properly.

• New 12 watts of power adapter compatible with iPad air 2?

  Is the new adapter of 12 watts of power which is delivered as an accessoriy with iPad compatible with iPad Pro 2 air or it will overheat the battery?

  Thank you

  It is very good.  I use my indiscrimantly brick power 12w with my iPad 2 Air and big-screen iPad Pro.  Output one is always in standard USB 5v and the iPad itself will regulate the current in the charging system.  http://www.Apple.com/power-adapters/ the only difference is 2. 1 out of note on the 2 and 10w. 4 a rating on the 12w, but the device regulates what current is used for billing.