Screen flashing after upgrade of windows 8

Similar Questions

• Screen flashing after migration to Windows 10

  Hello
  The screen flashes and I can't do any action except (CTRL + ALT + DELETE) just after the migration of Windows 10 on my laptop Satellite L855 17V.
  Help, please.

  Kind regards.

  Laurent

  Hi Laurent

  Did you get all the answers. I am new to this and have just turned on my Toshiba Satellite C55 still work on windows 8.1 and the screen goes ballistic. After that signature in the display starts to Flash and the only thing I can do is CTRL + ALT + DELETE. I wonder if its something to do with 25 downloads of Microsoft?
  If anyone can help please notify

• HP-431. Can't change my monitor resolution and screen brightness after upgrade to windows pro 8.1

  I can't change the resolution of my screen and the brightness of the screen after I upgraded the Windows of windows 7 ultimate for windows pro 8.1 build 9600

  I have already installed the graphics card, but I can't change my resolution of more than 1024 x 768

  My laptop is HP 431 with processor intel core i3 - 2310 m 2.10 GHz, AMD graphics 7450 M DDR3 1 GB HD (I don't know why, but I have already installed graphics AMD HD series 7400 M because my laptop is not compatible with the other AMD graphics), 64-bit OS

  I think that's the problem
  http://prntscr.com/3mf9l5
  What do you think guys?

  Please, help me

  Thank you

  I'm sorry that this driver has not worked.

  The pilot I posted should be only for laptops with the series 7 Intel chipsets.

  I guess W8.1 is not in charge of your model.

  You can see if this W8 driver works, but I think that nothing is going to work for this model.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_110852_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• want to m6 sleekbook: screen flashing after windows update

  After the update windows 8.1 and later to win 10 screen flashes all the time between desktop screen and blue, already install all updates of HP with the intell and Windows safe mode - the same situation, all reinstalled video drivers by myself, but still no result,

  is it possible to solve this problem without getting windows to the previous version? or reinstall the entire system is the only solution?

  Hi @nazik_UA ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with a screen flashing after an update.

  Here is a link to put the laptop in Safe Mode. This occurs in safe mode?

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  If this did not help, you need to reinstall the operating system.

  I hope this helps.

  Thank you.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Computer laptop Sony Vaio after upgrade to Windows 8 screen appears Dim

  * Original title: laptop Sony Vaio upgrade to Windows 8

  Since I've upgraded to Windows 8, my screen on my Sony notebook is very low. I went on the Sony website, and he recommended that I have not upgraded to Windows 8. Too late! What should I do to fix this?  I have a Sony Vaio VPCS111FM. Thank you!

  Good morning Sonu,

   
  Thanks for posting your query in Microsoft Community.
   
  I'm sorry to know that you are facing problems with the Sun computer screens after upgrade to Windows 8
   
  I imagine how it could be frustrating when things do not work as expected.
   
  We will try the following methods and check if it helps.
   
  Method 1: Enable adaptive brightness and see if brightness improves:
   
  1. press Windows + X key together on the keyboard button.
  2. Select Control Panel.
  3. click on power under Control Panel Options.
  4. Select the settings of under balanced plan.
  5. click on change advanced power settings.
  6 expand the view.
  7. turn on the Enable Adaptive brightness.
   
  If this method does not improve the brightness of the screen, turn off Adaptive brightness allow once again.
   
  Method 2: If you still face the question, I suggest to download graphics drivers on the manufacturer's Web site and follow the link below and install the drivers of graphics card in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Additional reference:

  If the problem persists check the link below and follow the suggestions of Miguel

  Sony VAIO - hardware & networking community
  http://community.Sony.com/T5/VAIO-hardware-networking/VAIO-VPCS111FM-display/TD-p/62019
   
  Hope this information helps, just reply to the State of the question to get help.

• Why my screen blinking after upgrade to 7?

  monitor constantly blinks after start upward. I have the model of g70 smart touch and after the upgrade of system 7, the screen flashes constantly.

  Windows Update has nothing to do with the upgrade of Windows.

  Maybe you need an update of the driver for your video card or your system can't handle Aero? Post here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO