screen freezes and goes black

everything goes well, I can do something on my laptop.untill I stop using the computer and walk 5-10 minutes and then the screen freezes and becomes black. From there I can't hit the power button and start the upward. It becomes really frustrating.

I have vista Home premium. Please help me.

Your PC may be incompatible with the mode "Eve":

  1. Open Power Options by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Power Options.

  2. On the select a power plan page, click on change settings for the plan under the selected plan.

  3. The parameters of change for the plan of the page, click on change advanced power settings.

  1. Under the Advanced Settings tab, expand sleep, expand sleep after, and then do one of the following:
  2. If you use a laptop, click on battery or plugged in (or both), click the arrow, and then click never.

Tags: Windows

Similar Questions

  • Satellite M70 164 - screen freezes and goes black, overheating

    Hello world! :)

    Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
    The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

    I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
    Even if the computer does not have time to warm up, this suggests it might be a heat problem.
    So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

    With the fan facing these, I reinstalled Windows - so no Virus.
    Laptop fan * not * continue to operate as it is overheating.
    The fan runs and it is not clogged as I've cleaned.

    So if anyone has the same problem, or ideas, please respond!
    (And sorry for my English)
    Thanks in advance! : D

    Hey Buddy,

    I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

    But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

    Check this box!

  • On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

    I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

    Hello

    First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

    Thank you

    Nitin Aswani

  • New Y500 brand guard freezing and goes black screen

    I recently bought the y500 Monday and it was perfect until today where she got a blue screen of death with the ERROR of VIOLATION of CUSTODY of DPC dog or something like that and since then it has been freezing randomly and goes black screens where I turn it off? Any help?

    I fixed it I think it's all good, until here, if anyone has the same problem, I have just restored my pc to a date where he worked well and optimized my drivers. I may not be not similarly had to restore my pc

  • Satellite A100-999 - screen flickers and goes black

    Hi, I have a problem with my Satellite A100-999.

    The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

    Thanks for your help.

    Hi xiuxiuejar_1,

    HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

    Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

    I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

  • Satellite M70 - screen flickers and goes black, white or other

    I have a portable Satellite M70 and lately the screen becomes either black, white and a few other colors (no ghost image).

    The laptop seems good but I can t see anything so the only solution is to turn on and off. He didn't used to do this.
    I have updated the BIOS and the driver of the screen but always comes back.

    Any suggestions?

    Have you tried an external monitor on the laptop?
    It would be important to make sure if it s a display or the motherboard problem.
    Check it!

    Have what driver you installed for the laptop? You must use the driver from the Web from Toshiba site.

    Good luck!

  • recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

    recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

    Run this test and post the results here.

    http://www.etresoft.com/etrecheck

  • computer freezes and goes to power saving mode

    Several times a day my computer freezes and goes into the power saving mode.

    Hello
     
    1. have you made changes on the computer recently?
    2. do you use a particular application when your computer crashes?

    Method 1.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    Step a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222
     
    Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Method 2.
    Also, check the logs of the observer eveny for recent activity on your computer and check.
    This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

    Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

    It print a page of test very well and also printed from Notepad and word fine

    Scott

    Hi Scott,.

    (1) if it works well before?

    (2) remember to make changes to the computer before this problem?

    (3) what is the complete error message you receive?

    Method1: The computer in the boot and a test to see if you can print

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    If the problem persists, you can post your query on the Windows Live Forums for more expert help

    Windows Live Forum -http://windowslivehelp.com/

    Thanks and greetings

    Ajay K
    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Screen freezes and randomly goes to a screen of different color at a given time.

    Original title: SCREEN FREEZES

    HAVE A DESKTOP ACER, 15 MONTHS OLD, WINDOWS VISTA! ILL BE USING AND IT WILL RANDOMLY TO A DIFFERENT AT SOME POINT COLOR SCREEN, EVEN SLOWED DOWN! IT CAN BE PINK, BLUE, YELLOW, BLACK, WHTE, ETC... THE ONLY THING I CAN DO IS TO POWER DOWN. HE TOOK TOO MUCH FROM BEST BUY, ILS REPLACED MOTHERBOARD, RESEATTED OF RAM AND IT STILL IS! PRETTY MUCH RULED OUT OF KEYBOARD, MOUSE AND OR CABLES. Help, please! THINK BEST BUY IS THE OPERATING SYSTEM.

    Hi linda elias.

    You can try to use another monitor and check if it helps.

    Also check out the link:

    Troubleshoot monitor and video card

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How do I get my computer screen to stop going black and my computer to stop going implementation hibernate on its own if I don't touch it for five minutes?

    I had resonance just do a system restore on my computer but now if I do not touch my computer for five minutes, it becomes automatically black and goes on Hibernate, and I don't know how to solve this problem. I tried to look in my settings and change the screen savers, but nothing works so if someone can tell mw what Miss me I would be very grateful, thank you.

    I had resonance just do a system restore on my computer but now if I do not touch my computer for five minutes, it becomes automatically black and goes on Hibernate, and I don't know how to solve this problem.

    Here's how to disable the sleep for vista: click Start. Go to control configuration\systeme and Maintenance\Power Options and 'change plan settings' for your current plan. Under 'put the computer to sleep', choose 'never '.
    I hope this helps.

  • mini iPad screen freezes and close Web pages

    Recently, my iPod mini has been the screen freezes while on various Internet sites, and I was also watching a Web site when the Web page is suddenly closed and I am struck to the homescreen (which displays the grid of the app).  When the screen freezes, I have to do a hard reboot because the iPod does respond to any stimuli.  Freeze the screen became much worse after the 9.3.3 iOS and iOS 9.3.4, closing only started after that, the newest Web page updated.

    Does anyone else have this problem?

    Try resetting Safari. Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. Then go to settings > Safari > clear the history and data from the Web site. Then restart the unit.

  • Satellite M70-169: screen freezes and meshes + mouse freezes

    Hello
    Hope you can help. So far, I'm impressed by my toshiba satellite m70-169.

    He has recently developed an intermittent fault: when the tilt of the screen the effect of light mesh on it and the screen freezes. The mouse also hangs at this point.

    If I tilt the screen one way or the other I can get it to work properly. A slighy inclination of the screen can cause the screen to freeze again. The problem is getting worse, however.

    The machine has never been dropped or struck, but was taken by one of the screen when it is open.

    I disassembled the strainer and push gently on various points and cables but nothing in this area suggests a loose connection or a weak point. So I believe the problem is in the essence. I tried to open this up but it fails because I didn't force anything.

    Question 1: any suggestions on the problem and possible solutions?
    Question 2: advice like how to open the main part, so I can check any loose cables, connectors or broken bones?
    Question 3: patterns for disassembly?

    Even once - I hope you can help - thanks in advance...

    John

    Hi John

    The above user is right. It s too risky to disassemble the laptop without having any experience with laptops.
    It is why I always recommend taking to a technician.

    But if you want, you can have a look here:
    http://www.irisvista.com/tech/laptops/ToshibaM55/laptop_LCD_screen_removal.htm

    It s a site on satellite M55 and withdrawal screen.
    But once again; You can do everything BUT only at your own risk! ;)

  • Satellite M55-S135 screen freezes and becomes white.

    Recently, my computer screen freezes until I have the touch. I touch the screen I use the computer or the screen turns white and everything I type does not register on the screen. I see not the entrance until I get the screen and hold it pressed. Sometimes even if I hold the screen I can not imput to register, it will just white. Anyone know why this happens.

    This happens when the displaycable is not correctly connected to the control that is located at the top of the LCD screen. I highly recommend to send your machine to a service partner in your country and let check this problem. It could also be a malfunction of the material of the screen, but not for sure.

    If you want to contact the nearest service partner in your country, click here--> "http://eu.computers.toshiba-europe.com/" then then just go to-> Support downloads & -> support-> repairs maintenance home page &-> find the nearest authorized Service provider

    Welcome them

  • When to add screen portable tv goes black trying to 'fixit' said that he had no problem

    Dell inspiron 1525

    Vista

    I tried 'fixit' said that he had no problem

    Problem is still there and when I plug a HDMI cable monitor goes black and makes tv

    I am unable to make any changes when this happens.

    Any help out there?

    Hello

    I suggest to refer to this link and follow the steps in this link to connect the TV to the laptop and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    It will be useful.

Maybe you are looking for

  • HP 15-g092nd: upgrading to windows 7

    Hi I just bought laptop model HP 15-g092nd with Win 8.1 too many problems, as I work on most of the time on another pc & notebooks with Win7. So I go down to Win 7 32 bit to have all my software also works. Now, the drivers do not work or are unstabl

  • Hp7520

    Set up above the printer. Keep on to message don't use type of phone cord inappropriate fax. I have 4 wires from the wall to the fax and 4-wire connecting fax to phone/answering machine. The suggestion is to use the line provided with the printer, I

  • I have an old computer with the original XP disc. I did a complete new installation from scratch.

    Now I need all the updates, but the computer do not recognized I'm addicted to the internet? I don't know what to do. Please please don't tell not to get SP3, the computer can not get on the internet and this is the first version of XP in 2001 or 200

  • Movement of cursor eratic with Word 2007

    Hello Gloria!I'm doing knowledge with my new HP Compaq and Word 2007.  While I'm typing a normal document, blow and unexplainedly (at least for me) the cursor will move to everywhere else in the document.  At first I thought it must be me, so I looke

  • I am interested in knowing the difference between professionals and home in windows

    I plan so that it starts a new business that requires about ten to twenty computers. So I'm going to buy assembled computers where the price is an important factor. Can I buy an original copy of windows 7 Professional and use all my computers?  If no