New Y500 brand guard freezing and goes black screen

Similar Questions

• screen freezes and goes black

  everything goes well, I can do something on my laptop.untill I stop using the computer and walk 5-10 minutes and then the screen freezes and becomes black. From there I can't hit the power button and start the upward. It becomes really frustrating.

  I have vista Home premium. Please help me.

  Your PC may be incompatible with the mode "Eve":

  1. Open Power Options by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Power Options.

  2. On the select a power plan page, click on change settings for the plan under the selected plan.

  3. The parameters of change for the plan of the page, click on change advanced power settings.

  1. Under the Advanced Settings tab, expand sleep, expand sleep after, and then do one of the following:

  2. If you use a laptop, click on battery or plugged in (or both), click the arrow, and then click never.

  • If you are using a desktop computer, click settings, click the arrow and then click never.
                                           de http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

• Satellite M70 164 - screen freezes and goes black, overheating

  Hello world! :)

  Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
  The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

  I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
  Even if the computer does not have time to warm up, this suggests it might be a heat problem.
  So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

  With the fan facing these, I reinstalled Windows - so no Virus.
  Laptop fan * not * continue to operate as it is overheating.
  The fan runs and it is not clogged as I've cleaned.

  So if anyone has the same problem, or ideas, please respond!
  (And sorry for my English)
  Thanks in advance! : D

  Hey Buddy,

  I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

  But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

  Check this box!

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• reading the media 11 guard freezing and setting player buffering

  MediMedia reading Player 11 maintains the gel and bufferinga reading Player 11 guard freezing and buffering

  Hello

  1. only it freezes everything by playing a particular song? If so, what is the file format of the song?

  2 have you made any changes to the computer before the show?

  Method 1: Run the following fix - it:

  Solve the problems of Windows Media Player video and other media or library:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: The graphics card uninstall and reinstall drivers and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the graphics card, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

    

• computer freezes and goes to power saving mode

  Several times a day my computer freezes and goes into the power saving mode.

  Hello
   
  1. have you made changes on the computer recently?
  2. do you use a particular application when your computer crashes?
  
  Method 1.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  Step a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  Method 2.
  Also, check the logs of the observer eveny for recent activity on your computer and check.
  This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

  I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

  Hello

  First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

  Thank you

  Nitin Aswani

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Computer freezes and goes in chkdsk before Vista starts

  My computer keeps freezing and then I have to turn it off.  When I turn it back on, it goes through chkdsk before that Vista will start.  Last night I got the error message below.  I considered all my backup files and wiping the hard drive clean stupid.  I know I'll regret however do.  Also, I don't know if it's a software issue or a hardware issue.  Please, please, help a young girl.  BSOD?  This is the case of 90...

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6000.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               77

  BCP 1:                                                    00000001

  BCP 2:                                                    00650064

  BCP 3:                                                    00000000

  BCP 4:                                                    A90F9B68

  OS version: 6_0_6000

  Service Pack: 0_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini030910-01.dmp

  C:\Users\Nicole\AppData\Local\Temp\WER-1399547-0.SysData.XML

  C:\Users\Nicole\AppData\Local\Temp\WER8C57.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  In the control panel select Problem Reports and Solutions (problem of type in)
  The START searchbox), go to the history of the problem, your mistake right click and choose
  Check the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and
  Click on MonitoringTools then the reliability monitor (type of reliability in research
  at startup). This list is a chart of the software installs, uninstalls, Windows
  updates and crashes by date. See if your plant started to occur after
  you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box, then right-click and)
  Choose run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796

  --
  ..
  --
  "sweet.whispering" wrote in message
  News: 46e00b13-747-d-4e1d-8adc-bfe7401ca19d...
  > My computer keeps freezing and then I have to turn it off. When I turn
  > back on, it goes through chkdsk before that Vista will start. Last night I had
  > error message below. I considered all my backup and wiping files
  > clean the hard drive of the stupid. I know I'll regret however do.
  > Also, I don't know if it's a software issue or a hardware issue. Please,
  > please, you can help a young girl. BSOD? This is the case of 90...
  >
  >
  > Signing of the problem:
  >
  > Problem event name: BlueScreen
  >
  > OS Version: 6.0.6000.2.0.0.768.3
  >
  > Locale ID: 1033
  >
  >
  >
  > More information about the problem:
  >
  > BCCode: 77
  >
  > BCP 1: 00000001
  >
  > 2:00650064 BCP
  >
  > PCO 3: 00000000
  >
  > BCP 4: A90F9B68
  >
  > OS Version: 6_0_6000
  >
  > Service Pack: 0_0
  >
  > Product: 768_1
  >
  >
  >
  > Files helping to describe the problem:
  >
  > C:\Windows\Minidump\Mini030910-01.dmp
  >
  > C:\Users\Nicole\AppData\Local\Temp\WER-1399547-0.sysdata.xml
  >
  > C:\Users\Nicole\AppData\Local\Temp\WER8C57.tmp.version.txt
  >
  >
  >
  > Read our privacy statement:
  >
  > http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
  >

• Satellite A100-999 - screen flickers and goes black

  Hi, I have a problem with my Satellite A100-999.

  The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

  Thanks for your help.

  Hi xiuxiuejar_1,

  HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

  Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

  I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

• Satellite M70 - screen flickers and goes black, white or other

  I have a portable Satellite M70 and lately the screen becomes either black, white and a few other colors (no ghost image).

  The laptop seems good but I can t see anything so the only solution is to turn on and off. He didn't used to do this.
  I have updated the BIOS and the driver of the screen but always comes back.

  Any suggestions?

  Have you tried an external monitor on the laptop?
  It would be important to make sure if it s a display or the motherboard problem.
  Check it!

  Have what driver you installed for the laptop? You must use the driver from the Web from Toshiba site.

  Good luck!

• Color bar line at startup, and then black screen, then startup is very well

  macOS Sierra - macOS 10.12 Beta (16A294a)

  MacBook Pro (15 inch, early 2011)

  2.2 GHz MacBook Pro (MC723LL/A)

  Intel Core i7

  Intel HD Graphics 3000 - 512 MB and AMD Radeon HD 6750 M (1024 MB) with automatic switching

  Processor: 2.2GHz

  16GB 1333 MHz DDR3 memory

  Boot disk: 1 TB - Samsung 850 SSD

  Graphics - graphics Intel HD 3000 512 MB & AMD Radeon HD 6750 M - 1024 MB

  Here is the situation - when I initially push the power button - the display lights up, come up apple logo, bar starts to fill in through the screen start and the point 1/2 way, I get a strange color line (Fig 1).

  Then the screen goes black for a second or 2 (photo 2).

  Then start bar turns and ends. (photo 3)

  Then I can connect.  (photo 4).

  Other that the newspaper in question, it doesn't seem to be any other question.  Systems has passed Diagnostics.  I have reset NVRAM & MSC.

  Anyone know what is happening?

  Any help is appreciated.  I bought the MBP, used from a seller on Amazon.

  Thank you.

  Thank you.

  I had this problem too, but it resolved now on the Apple store. They had seen previously on older hardware which has been updated for Sierra with FireVault market and occurs when the operating system is switching graphics modes. I got just my logic board replaced so wanted it is solved.

  We have attempted to extinguish FireVault, but the question was still there. Then they have successfully installed a new copy of a Mavericks and the problem was gone. Then they installed a new copy of Sierra and the question is still missing. Now, I have re-enabled FireVault and the issue has gone.

• Netflix and Hulu Black Screen

  Hi all.

  The last two days, Netflix and Hulu give me questions on my ATV 4. Applications work fine on my other TV. The menus work and I can select shows or movies to watch, but when I hit play the screen goes black and I can still hear the audio. Also, the name of the network remains visible, in the lower corner, on some TV shows.

  I have tried all the suggestions... unplugged troubleshooting, new HDMI, restarted ATV, restarted the modem & Airport Extreme. I even reset it Atv back to the factory. Still does not work right. All my applications and games works fine.

  Any ideas would be greatly appreciated. Thank you

  It really looks like a HDMI problem. You say you tried another cable, if you have reconnected both ends already. You can try an another HDMI input on the TV, to rule out the possibility of a potential problem to tne connector? Is the cable "high speed"? Must be marked on or printed directly on the cable connectors. Which indicates that it is the standard in force.

• HP Stream: Connect and then black screen

  Just bought the HP flow last night for my daughter. We on that last night for about 10 minutes and then it turned off. Today, when I buy on this subject, we shot it, enter a name for the connection and then the screen goes all black. If we hit ctrl/alt/delete the Task Manager box, but everything remains black and we cannot click on anything whatsoever.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point prior to the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K