Screen freezes and two rows of vertical bars appear.

Similar Questions

• Satellite M70 164 - screen freezes and goes black, overheating

  Hello world! :)

  Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
  The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

  I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
  Even if the computer does not have time to warm up, this suggests it might be a heat problem.
  So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

  With the fan facing these, I reinstalled Windows - so no Virus.
  Laptop fan * not * continue to operate as it is overheating.
  The fan runs and it is not clogged as I've cleaned.

  So if anyone has the same problem, or ideas, please respond!
  (And sorry for my English)
  Thanks in advance! : D

  Hey Buddy,

  I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

  But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

  Check this box!

• recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• screen freezes and goes black

  everything goes well, I can do something on my laptop.untill I stop using the computer and walk 5-10 minutes and then the screen freezes and becomes black. From there I can't hit the power button and start the upward. It becomes really frustrating.

  I have vista Home premium. Please help me.

  Your PC may be incompatible with the mode "Eve":

  1. Open Power Options by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Power Options.

  2. On the select a power plan page, click on change settings for the plan under the selected plan.

  3. The parameters of change for the plan of the page, click on change advanced power settings.

  1. Under the Advanced Settings tab, expand sleep, expand sleep after, and then do one of the following:

  2. If you use a laptop, click on battery or plugged in (or both), click the arrow, and then click never.

  • If you are using a desktop computer, click settings, click the arrow and then click never.
                                           de http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

• My Prem Pro program window image is blocky and green red yellow vertical bars when static - scrubs and exports ok... what's up?

  My Prem Pro program window image is blocky and green red yellow vertical bars when static - scrubs and exports ok... What is happening?

  This thread seemed to solve... (seems to be a question of el capitan). Super frustrating though, as I don't want to turn off automatic switching: Premiere Pro chart question?

  A lot of El Capitan being more respectful of the adobe!

• mini iPad screen freezes and close Web pages

  Recently, my iPod mini has been the screen freezes while on various Internet sites, and I was also watching a Web site when the Web page is suddenly closed and I am struck to the homescreen (which displays the grid of the app).  When the screen freezes, I have to do a hard reboot because the iPod does respond to any stimuli.  Freeze the screen became much worse after the 9.3.3 iOS and iOS 9.3.4, closing only started after that, the newest Web page updated.

  Does anyone else have this problem?

  Try resetting Safari. Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. Then go to settings > Safari > clear the history and data from the Web site. Then restart the unit.

• Satellite M70-169: screen freezes and meshes + mouse freezes

  Hello
  Hope you can help. So far, I'm impressed by my toshiba satellite m70-169.

  He has recently developed an intermittent fault: when the tilt of the screen the effect of light mesh on it and the screen freezes. The mouse also hangs at this point.

  If I tilt the screen one way or the other I can get it to work properly. A slighy inclination of the screen can cause the screen to freeze again. The problem is getting worse, however.

  The machine has never been dropped or struck, but was taken by one of the screen when it is open.

  I disassembled the strainer and push gently on various points and cables but nothing in this area suggests a loose connection or a weak point. So I believe the problem is in the essence. I tried to open this up but it fails because I didn't force anything.

  Question 1: any suggestions on the problem and possible solutions?
  Question 2: advice like how to open the main part, so I can check any loose cables, connectors or broken bones?
  Question 3: patterns for disassembly?

  Even once - I hope you can help - thanks in advance...

  John

  Hi John

  The above user is right. It s too risky to disassemble the laptop without having any experience with laptops.
  It is why I always recommend taking to a technician.

  But if you want, you can have a look here:
  http://www.irisvista.com/tech/laptops/ToshibaM55/laptop_LCD_screen_removal.htm

  It s a site on satellite M55 and withdrawal screen.
  But once again; You can do everything BUT only at your own risk! ;)

• Satellite M55-S135 screen freezes and becomes white.

  Recently, my computer screen freezes until I have the touch. I touch the screen I use the computer or the screen turns white and everything I type does not register on the screen. I see not the entrance until I get the screen and hold it pressed. Sometimes even if I hold the screen I can not imput to register, it will just white. Anyone know why this happens.

  This happens when the displaycable is not correctly connected to the control that is located at the top of the LCD screen. I highly recommend to send your machine to a service partner in your country and let check this problem. It could also be a malfunction of the material of the screen, but not for sure.

  If you want to contact the nearest service partner in your country, click here--> "http://eu.computers.toshiba-europe.com/" then then just go to-> Support downloads & -> support-> repairs maintenance home page &-> find the nearest authorized Service provider

  Welcome them

• Screen freezes and randomly goes to a screen of different color at a given time.

  Original title: SCREEN FREEZES

  HAVE A DESKTOP ACER, 15 MONTHS OLD, WINDOWS VISTA! ILL BE USING AND IT WILL RANDOMLY TO A DIFFERENT AT SOME POINT COLOR SCREEN, EVEN SLOWED DOWN! IT CAN BE PINK, BLUE, YELLOW, BLACK, WHTE, ETC... THE ONLY THING I CAN DO IS TO POWER DOWN. HE TOOK TOO MUCH FROM BEST BUY, ILS REPLACED MOTHERBOARD, RESEATTED OF RAM AND IT STILL IS! PRETTY MUCH RULED OUT OF KEYBOARD, MOUSE AND OR CABLES. Help, please! THINK BEST BUY IS THE OPERATING SYSTEM.

  Hi linda elias.

  You can try to use another monitor and check if it helps.

  Also check out the link:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Desktop and Windows 8 tiles screen freezes and reload continuously.

  When my system starts and loads of my user profile, there is a long pause before the loading screen of the tile. then when the tile appear most is empty and I can't click on anything whatsoever. After about 20 seconds, the screen reloads or resets to the same effect, without interruption. I tried the following

  1) I checked event viewer and found this:

  Windows cannot access the file C:\Users\user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-1162909_80.dat for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the Windows Explorer program due to this error.

  Program: Windows Explorer
  File: C:\Users\user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-1162909_80.dat

  The error value is listed in the additional data section.
  User action
  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.
  2. If the file is still not accessible and
  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.
  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.
  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.
  4. If the problem persists, restore the file from a backup copy.
  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data
  Error value: C000009C
  Disc type: 3

  I ran CHKDSK in cmd prompt, but no change.

  2) I also did a sfc/scannow, which resulted in "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log. »

  3) I run a windows app store troubleshooting see below for the result

  Windows store troubleshoot result

  Problems found

  Details of detection

  5 Cache of Windows Store may be damaged Not fixed

  Reset and open Windows Store Completed

  5 Configuration of the Windows store may be damaged Detected

  Reregister Windows Store Completed

  6 Some security settings are missing or have been modified Fixed

  Some applications would not have access to the necessary resources

  Thank you Shawn,

  After about 8 hours of trial and error, I finally did it.

  After you have identified the problem as a file (TileCacheStartView - xxxxx.dat), which windows explore was not found, (even if the file was in the right folder), I decided to do the following:

  -J' have created a new user profile and connected without any problem. File TileCacheStartView - xxxxx.dat worked in this profile

  -copied new user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-xxxxxdat new profile C:\Users\

  -pasted original profile folder OriginalC:\Users\ \AppData\Local\Microsoft\Windows\Explorer. 

  -past to the original profile

  and it worked miraculously.

• top of trhe screen freezes and no way I can click on the links. If I can take down pulling up of the scroll bar and its operation. pulling the top link to deactivate it again.

  the screen below the tool bar does not work, say 1 to 1.5 inches wide. below the part everything works fine. A link at the bottom works fine but if I pull the scroll bar down and take the link up then the hand does not appear. Yet once, if I pull down the link below 1.5 inches high and then hand appears on the link. In all sites what is happening. I opened the same sites thru googlechrome. There's no problem. Help, please.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Screen freezes and blinks after the update to 10.11.6

  Hello!

  I have a Macbook Pro for mid-2007, which has helped a lot, was powerful and as stable as steel. I've never had or known major bugs since I have. Leopard 10.5 aka El Capitan 10.11.5, nothing to notice. The usual Mac you need: solid, stable and fast. I have an IntelCore 2 Duo, 4 GB of RAM, Samsung SSD 840 series, the old Fujitsu HDD for storage and a Nvidia GeForce 8600 M GT graphics chipset.

  But the nightmare started when install the last update of El Capitan: OS 10.11.6. Update was fast enough, just half an hour, and I'm going, with the last update. I was browsing Safari then my screen blinked once, and all that was displayed was frozen, except the mouse I could be moved. 10 seconds or about later, my system of defrost and I could use it. Until less than a minute later, new flashes and freeze again. And he began to be more bizarre than ever: Safari window displaying strange patterns, with little colored squares, bar menus, very noisy. Hard, I rebooted my Macbook Pro, hoped it was just a random bug. But no, it has reproduced, forever and ever, when browsing in Safari. So I decided to switch to Opera web browser just for a test day. And... nothing happened. No bugs, no frost, no flashing screens. I found the source of this Safari bug, so I went to the opera.

  Until yesterday, when you use the Finder to display images using Quicklook. Flashes and the gel. When you are using TweetDeck, same result, flashes & freeze. Even if you use Opera when scrolling too fast: flashes and the screen. When you use presentation and Launchpad. And if this bug to reproduce twice, the display shows a strange patterns, such as Cup-a part of windows, bar menu invisible, etc..

  It's VERY BORING. It is the first time in 8 years of work with Mac OS X, I have experienced this kind of graphic bug. The last time I encounter some bugs graphics but much more discreet, and it's in 2008 with OS 10.5.3, which was not very stable (the next version is much more stable).

  I know this has something to do with the Nvidia driver. The same lines are appearing in the newspapers when the bug happens, like this:

  > 31/07/2016 10:50:47, 000 kernel [0]: NVDA (OpenGL): exception channel! exception type = 0xd = graphic engine (GR error 5) error

  I don't want to hear that this has something to do with the graphic chipset, because before the 10.11.6 updated, I had NO gel or flashes of the screen at all. I had never actually had. And the motherboard has been replaced in 2010 because the chipset was dead.

  So, I don't know what to do. I guess I'll have to wait a few months the 10.11.7 next update, hoping that he can solve the display bug. And I wouldn't be able to install Sierra because... Well, my Macbook Pro is too old, so I'm stuck with El Capitan (but that's another story).

  Thanks in advance if you have any tips that might help.

  It is difficult to say if this is indeed caused by the last update or a (chance) sign is not material. You might be able to work around the problem by installing the gfxCardSatusand forcing your MacBook to use the GPU integrated or discreet, but not automatically switch between them.

• Screen freezes and restarts after repair

  Hey guys,.

  So I just got my HD Motorola Razr Maxx return of repair Motorola Droid. Before he went to repair, this device has been reset to chance the two stock (no new apps on Store) and custom. This device was not docked or altered in any way other than with game store applications and widgets from Google. Until the repair has taken place, the device had system version 9.18. After that I came back from repair, he returned with the version 9.20 System. I got the camera Thursday and since then the screen randomly froze a couple of times. It is quite frustrating. You guys have any suggestions on things I should try or should I send it back to Motorola for repair again?

  Thank you

  Brandon

  If it was my phone and I had a backup that I'd send it in. Could give them a chance to do things the second time around. I hope this helps.

• My screen freezes and turns different colors?

  My computer has been freezing for a while now. The screen of the monitor turns of different color, for example in my training a photo of a Tiger so I when it freezes my screen turns orange. If I watch a video or something, it turns out whatever color is in my background. The computer and the monitor turned on but it freezes just with a color. I changed the graphics card and the monitor, but it still does the same thing. I have a HP w2007 monitor, I'm not too clear with some stuff from the computer. Any suggestions?

  Well, I made this thank you. I have NVIDIA GeForce 9500 GT, I had this thing "driver detective" on my computer and it said I had an outdated driver, don't you think that is what is causing my problem?

  Yes, certainly.  Do not use these Web sites and applications

  Where did you get the driver since you installed finally?

  Unless you have a portable computer (in this case, go on the site of the mfr of laptop), go to http://www.nvidia.com/Download/index.aspx?lang=en-us and click on the button 'Graphics drivers' under 'Option 2 '.

  Edit:

  Maybe it's not a driver problem but a monitor.

  I suggest to post in both the following forums:

  http://h30434.www3.HP.com/T5/desktop-audio-video-monitors/BD-p/monitor
  http://www.FixYa.com/support/p921905-hewlett_packard_w2007_black_lcd_monitor/solutions

• X 1163 projector shows smaller than the computer screen image and creates the horizontal scroll bar

  I just bought an Acer X 1163 projector for use in presentations. I like the brightness, size and features. I am disappointed to make a PowerPoint slideshow, you need to buy another remote, but it is an easy fix.

  Here's what's really about me!

  When I pull a Web site or other things on my laptop for the presentation, it has a horizontal scroll bar and does not fit it on the screen. I tried different settings and who are seeking an answer online, but can't find what I can do to get the image to display without a horizontal scroll bar.

  I'm almost beginning to panic that I bought this for a large presentation I have to give next week. I hope it's one of those stupid questions with an easy answer.

  Thanks in advance for your help.

  My techy boyfriend just called. Here is the solution. (It kills me when someone has a question asked and more later said: "never mind, I figured it" and never says how do to the next person to come.)

  The question seems to be in the computer resolution setting and how it automatically resets when plugging n the projector. To resolve this problem (at least in windows 7) follow these steps:

  Right click on the desktop

  Click on display

  Click on change display settings

  Select the 1366 x 768 resolution

  It shows exactly what I'm looking for now on my computer.

  Thank you for having a forum to ask in all cases