Screen has decided to expand on the Satellite

Similar Questions

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• My screen has turned 90 degrees to the left, how to change back to its original position?

  My screen has turned 90 degrees to the left.  How can I get this back to its original position?

  Press CTRL + ALT + the up arrow key.
  Also try to do a right click on the desktop, select Graphics Options | Rotation | Normal

• Screen has become so great that the arrows do not put the browser in or down

  "The screen has grown so large that the arrows in or put down.

  Original title: browser disappeared.

  Make the text larger or smaller onscreen:
  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  Change your screen resolution:
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  J W Stuart: http://www.pagestart.com

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• A recent update of Yosemite caused serious conflicts with my computer. Apple has decided to re - install the original Yosemite and update. PEO

  A recent update of Yosemite caused serious conflicts with my computer. Apple has decided to re - install the original Yosemite and update. This has been successfully done, now, I have to re - install any third part software, but Adobe system is

  Connect to your paid account of Cloud to install the cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• need help with my screen has been using mouse and the screen is smaller and smaller

  need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

  Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

• my screen has shrunk from black on the edges

  my screen has decreased and there like 2 inches of black around the edges, its really annoying! Please can someone help?

  Hello

  It is probably descended from your display settings.

  You can right click Desktop and select Personalize. Click settings to display at the bottom. Try a higher setting which corresponds to what you monitor can handle.

  If for some reason, this does not work, your graphics driver may need to update.

  Click on start and type > devmgmt.msc

  In graphics cards are you looking for the adapter name and manufacturer. Go to the website of the company to download the latest driver for the adapter.

  I hope this helps!

  Mark <> Microsoft Partner

• Screen freezes - need to turn off the Satellite C660 series to retrieve the display

  I have a Satellite Pro with Windows 7.
  As Emma in a previous thread, I have problems with the screen freezing and having to go off to recover.

  I think it might have something to do with the Windows updates, but can anyone offer any assistance.

  Please, I beg you! In the plain in English please because I am a silver surfer!

  Mariel

  + The message was edited: laptop model number has been added.

  Hi Mariel

  It would be interesting and useful to know which model of laptop you have.
  Then you tried to reinstall or update the display driver?

  Please do.

• Screen Toshiba Innovation by turning on the Satellite P770

  Hello

  I have an older P770 of 2 weeks.
  Last week the laptop off itself all of a sudden.

  I was a very hot day - I don't know if this had anything to do with it? It seemed very warm.
  I put on the fan next to the laptop and realized the fan to the vents. I use the laptop on a table. When I turned it on I got the Toshiba Innovation screen and down the bottom it says press to enter together to the top or enter the boot menu.

  I press F2, nothing happens. I press F12, nothing happens. I press CTRL F2 F2 SHIFT, ALT F2, etc. etc. etc.
  I gave up and turned off the laptop has waited a while and turn it back on.
  I did it a couple of times and finally he went into what looked like to the start menu and I followed the instructions.

  Now, this happened to me a few times in the last 2 weeks-, but only when I completely stop the day before.

  Now her he does not again this morning and its driving me crazy. Help, please!

  There is an entry in the Knowledge Base of Toshiba by updating the bios as of 16/02/12 about the improved satellite fan control (not given models) and there is an update of bios v1.8 dated 14 / 02 / 12. What is the solution?

• Has no updated BIOS on the Satellite X 200

  I tried to update the BIOS on my laptop when the whole system froze for a few minutes and then all the programs that the update has been closed. I tried to restart the phone after about 30 minutes, and then he froze the newspaper off the screen.

  The power button does not work, and given that my battery is full the system is frozen in the newspaper off the screen. Is anyway to turn it off?

  Please remove the dough, wait about 30 minutes, connecting your laptop to the power adapter only, and try to start your laptop.
  Please post the result.

• Half of my screen has low resolution and/or the contrast that the other half

  Greetings!

  The left side of the screen on my laptop seems normal with a high resolution and brightness, while the right side of the screen seems darker as it has a higher contrast and is more degraded it has a lower resolution... it looks almost like a demo of tv showing the difference between the high and low definition.

  Does anyone have an idea on how to get the screen of the same search on the screen?  The general change the appearance of the screen and return to an earlier date before that I messed up my computer did not work.
  Thanks in advance!

  See you soon!

  Could be a hardware failure on the laptop.

  One thing to try as a test is to start from a 'live' as Ubuntu OS (for example), just start it DO NOT install it. See - http://www.ubuntu.com/download/desktop/try-ubuntu-before-you-install - for more details. This should hopefully allow you to see if the screen works well or not in another OS, if it looks OK in Ubuntu, then its less likely to be a hardware problem. But if the screen is still divided, then unfortunately, it could be a hardware failure.

  Other things to try eventually (in no particular order):

  1. set to update your graphics card drivers to the latest compatible drivers available for your laptop, where they have been corrupted somehow.

  2 - is still divided into 'safe mode' or is it OK to whom?

  3. If you look in Device Manager, it shows errors regarding the graphics/display/monitor card?

  4. There is this fixit - http://support.microsoft.com/mats/Windows_Display_Quality_Diagnostics/ - in the center of MS fixit who can be worth it. But I doubt it.

  5. If this just started recently, try a restore point for just before it occurred.

  Assuming that you have already tried to change the screen resolution and depth etc color settings and then restore the default values, you need.

• Screen has no light, but under the flashlight, I see it works

  Suddenly, the screen backlight is gone and the screen is completely black.

  But while I manually turn the flashlight on a screen, somehow I can see the display shows everthing correctly.

  There's just no light completely.

  What's wrong? I tried all types of keyboard resets, removing the battery and etc... without success...

  I heard that maybe the HARDWARE problem (fuse WLED or backlight). is this true?

  If Yes, can you screenshot a good resolution of the images, to see where WLED DRIVER or BACKLIGHT FUSE is located (I have macbook pro, 2013), and also, where I can buy (e.g. ebay links to this parts)?

  Thanks in advance

  You have already diagnosed yourself. This looks like an inverter of backlight for me also.

  Take it to any Apple store for a free evaluation.

• Blue screen when I press FN on the Satellite X 200

  I have a new Toshiba x 200 SL and something very strange is happening. Whenever I press on CTRL + FN the computer crashes and a blue screen appears.

  Does anyone know what it is?

  I don't know what the problem is, but I recommend delete VAP from your system, download and install the latest version.

• Time Machine has decided to completely replace the four years of TC backups

  I had four full backups Time Machine of my iMac to my Time Capsule. A couple of weeks ago, I replaced my iMac with a new. Transfer backups has been flawless, worked fine and regular backup recovery continued as before. Then yesterday...

  My iMac gave me a message that essentially says that a thorough examination showed my backups were OK, but they all had to be replaced by a completely new iMac backup everything. I said OK. That backup has taken from one day to the next. This morning, I found the new overall backup was available, and I could recover my files, so this seems OK. Now, however, Time Machine says that it's going to save 145 GB (almost all my storage) again. Unless it's just stuck, saying that it is done, but actually does nothing. Everyone knows this? Should I cancel this new full backup or it means that I'll lose the only backup made last night?

  Any suggestions will be appreciated.

  You should NOT have continued using the old backup once you have migrated your files to the new iMac.

  The current situation is that the backup is damaged or there simply is not enough space to do a new backup. Neither TM remove enough files to continue to operate.

  If you want to keep your old backups. Go to airport utility and use the archive function.

  

  You will need to plug a USB stick formatted properly capacity equal to TB. It will then copy the content of the TC on the disc.

  Then, you delete the drive... a quick erase is only a minute or two... and then start a new backup.