Screen has no light, but under the flashlight, I see it works
Suddenly, the screen backlight is gone and the screen is completely black.
But while I manually turn the flashlight on a screen, somehow I can see the display shows everthing correctly.
There's just no light completely.
What's wrong? I tried all types of keyboard resets, removing the battery and etc... without success...
I heard that maybe the HARDWARE problem (fuse WLED or backlight). is this true?
If Yes, can you screenshot a good resolution of the images, to see where WLED DRIVER or BACKLIGHT FUSE is located (I have macbook pro, 2013), and also, where I can buy (e.g. ebay links to this parts)?
Thanks in advance
You have already diagnosed yourself. This looks like an inverter of backlight for me also.
Take it to any Apple store for a free evaluation.
Tags: Notebooks
Similar Questions
-
I dropped it and now the screen does not light, but sounds like the notifications are on.
Hi!, Sensei:
Welcome to Forum!
To help you, is necessary that you enter make, model (without serial number) and operating system.
-
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
which method is called when the screen has lost focus but stays on blackberry?
Hello
I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?
For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?
Please, help me please please
Override the following methods in your class to screen according to your needs
1. when the screen button to the stack
Call
onDisplay() or
onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen
2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form
call
onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns
3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)
call
onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped
& call
onObscured() - when your application moves to the background, or when a screen pushed above your current screen more
-
My screen has turned 90 degrees to the left. How can I get this back to its original position?
Press CTRL + ALT + the up arrow key.
Also try to do a right click on the desktop, select Graphics Options | Rotation | Normal -
Screen has become so great that the arrows do not put the browser in or down
"The screen has grown so large that the arrows in or put down.
Original title: browser disappeared.
Make the text larger or smaller onscreen:
http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smallerChange your screen resolution:
http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolutionJ W Stuart: http://www.pagestart.com
-
I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software. When I open it I get: "an error occurred when attempting to change modules. It will not import pictures and has no side panels under the library. What should I do?
-
Self-adhesive transparent GIF - find and share on GIPHY
My picture if you go full screen has white particles everywhere. I don't see it until I save for web. No idea how to solve this problem? I've never had this problem before.
This article gives to think the matte color change Transparent gif in Photoshop tutorial - PhotoshopCAFE
See if that helps.
-
My Mac Book Pro iTunes no longer displays my playlists and under the songs I see that previously downloaded MP3 songs not many who were previously in iTunes and part of my playlists. .
Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561
If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225
-
I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...
-
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
Half of my screen has low resolution and/or the contrast that the other half
Greetings!
The left side of the screen on my laptop seems normal with a high resolution and brightness, while the right side of the screen seems darker as it has a higher contrast and is more degraded it has a lower resolution... it looks almost like a demo of tv showing the difference between the high and low definition.Does anyone have an idea on how to get the screen of the same search on the screen? The general change the appearance of the screen and return to an earlier date before that I messed up my computer did not work.Thanks in advance!See you soon!
Could be a hardware failure on the laptop.
One thing to try as a test is to start from a 'live' as Ubuntu OS (for example), just start it DO NOT install it. See - http://www.ubuntu.com/download/desktop/try-ubuntu-before-you-install - for more details. This should hopefully allow you to see if the screen works well or not in another OS, if it looks OK in Ubuntu, then its less likely to be a hardware problem. But if the screen is still divided, then unfortunately, it could be a hardware failure.
Other things to try eventually (in no particular order):
1. set to update your graphics card drivers to the latest compatible drivers available for your laptop, where they have been corrupted somehow.
2 - is still divided into 'safe mode' or is it OK to whom?
3. If you look in Device Manager, it shows errors regarding the graphics/display/monitor card?
4. There is this fixit - http://support.microsoft.com/mats/Windows_Display_Quality_Diagnostics/ - in the center of MS fixit who can be worth it. But I doubt it.
5. If this just started recently, try a restore point for just before it occurred.
Assuming that you have already tried to change the screen resolution and depth etc color settings and then restore the default values, you need.
-
I have Photoshop CC
When I use paint tool to paint on lighter colors on a layer, it always goes under the colors darker on the same layer. Even if I paint the darker color first and the lighter color, second, the lightest color continues to go under the darker color. And it's all happening on the same layer too! It's like photoshop is to order the colors based on what color goes on top and what colors light up and down in the order how dark the color is.
How can I do so that the color that I finally painted goes on top?
See the blending mode in the Toolbar Options paint is set to Normal. There is a parameter 'Behind' who will actually do what you describe.
Also check your layers panel blend modes and settings for each layer. Maybe not relevant in the present case, but recommended when the strange behavior happens in the layers.
Gene
-
Screen has decided to expand on the Satellite
Today, I turned on my laptop and for some reason the screen decided to expand. Basically what is happening, it's that I have to move the mouse up or down up/down (a bit like press the edge of the screen) of the screen to see is the top of the window (window of the browser, for example) or downwards (taskbar). Physically, the screen goes up and down so I don't see the entire page in any point! I checked my display settings that look normal (ratio is 1280 x 1024) and tried to restore my PC to previous day that does not help :-(
Any help will be greatly appreciated.
I think that the resolution of 1280 x 1024 is not normal for laptops, it is typical for 17 "-19" conventional screens. " I don't know why this is so, but since 1024 x 768 (most likely the right one for you, unless you have a widescreen model) laptops tend to have special resolutions, such as 1400 x 1050.
-
need help with my screen has been using mouse and the screen is smaller and smaller
need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see
Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.
Maybe you are looking for
-
As there seems to be having no link e-mail to technical support please someone can tell me the price for a spare battery for portable Satellite above. Battery of my daughter with a visual impairment who do not charge for more than 5 minutes. can eras
-
my laptop will not update when I try to do it manually I get a code for error 80072efd
Windows Update will not update my comp. I get error 80072efd msg when I try to update manually. How can I solve this problem?
-
When I try to access my Inbox for outitgoes webmail, I get a message saying nested no uid in result of server really not necessary to sort the results. I can connect fine and records, sent access etc, but not my Inbox, what someone has any ideas how
-
No wifi driver available for hp 15-r033na windows 7 64-bit
Hi I have a laptop hp15-r033na and can not access internet via wifi all the other driver is available but this one for the wifi... I am running windows 7 64 bit, here is the hardware id PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01 Thanks Adam.
-
Rule-variable to change gravity
I'm pumping my alerts in a ticketing system. And found that foglight uses a system of gravity of 1-4 with 4 being the most serious alert "mortals." My ticketing system uses a severity 1-5, 1 being the most severe level. I think I need to create a