Screen is colored for about 3-4 seconds when I run vista and then past black and white after UPDATE 2/10

Similar Questions

• Audio Software OR Traktor - freezes for about half a second because of Dual Core

  Hello

  I've been test Native Instruments Traktor DJ Studio 3 and very often the audio timeline would freeze for about half a second and the game continues. I also have a good low latency soundcard PCI card, so that does not these breaks.

  I managed to get rid of this problem by disabling the second processor core in the BIOS setup. However, I don't like the fact that I'll have to do each time that I use Traktor.

  Is it a hardware problem or software? Software that does not use the two hearts should be able to run without problems, but apparently, there are a few interruptions happening that prevent some programs smoothly.

  That's why I'm posting here instead of the forums of NOR.

  Hello

  Why wouldn't be a hardware problem?
  The fact is that the processors with dual core Intel design and it will appear in Device Manager. Also I m sure that Intel will design with double CPU and core more in the future.

  However, I think and I'm sure it's only a software problem. Software developers have overlooked this fact that there could be another type of processors. In my opinion, you must contact the software manufacturing support to clear this problem. Maybe a few updates are available.

  That's all I can suggest.

• S10-3: netbook stops for less than one second when moved

  Hello

  Could someone tell me if it is normal that my netbook for less than a second when moved, while I watch movies, for example (the picture freezes for a few moments)? I know that the Lenovo S10-3 has a system of protection of special hard disk which stops him in case of accident, but is it possible that it is so sensitive that it stops for fractions of a second when I move the netbook while the HARD disk works?

  Thank you.

  Yes, it may be that sensitive. You can make it less sensitive in Control Panel > Active Protection.

  Another alternative would be to place your movies on an SD card / USB and let run out there.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever something happens on Firefox, I get a Message "Not responding" for about 10-20 seconds.

  For the last two days, Firefox acting strangley. It is not plant and must be closed, it's just a lot of crashes Micro. Whenever I change a tab, refresh a page, click on anything, do anything, Firefox doesn't work for about 10 to 20 seconds, sometimes less, sometimes longer. When it happens, I get a message at the top saying (not responding) until it suits me later.

  I had been very happy with Firefox, but if this problem cannot be corrected, I'll be forced to find an alternative, I don't like the sound of. Any help would be appreciated...

  Hello Adam.

  You may have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, make sure that it's not one of your modules installed, be it an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode , and then select disable all add-ons. If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme. You can troubleshoot plugins in the same way.

  If you want supported for one of your modules, you will need to contact the author.

• AFX freezes for 5 seconds when switching between first and AFX

  I do a lot of dynamic binding After Effects in first. So I'm constantly switch back and forth between the first and after touch. I would basically create the effect with AFX, then drag the comp on first and put it on my calendar. I would then switch back to AFX and tweak the timing of effects, back to the first and make sure it looks OK, etc.

  But since the latest updates, After Effects hangs now for 5 seconds when I move to make a few adjustments.

  This seems not to be that great after effects containing 100 comps projects.

  I use after effects CC 2015.3 13.8.1.38 and first Pro CC 2015.4 10.4.0 (30) man and 10 PC Windows.

  This seems not to be that great after effects containing 100 comps projects.

  Æ checks the integrity of the project and saves temporary versions of the project. Sounds perfectly normal to me. You may be able to get the best results by regulalrly flushing the caches, so older versions are not held, but really, this sounds more like you need to adapt to your workflow and splice the comps to separate projects on a "as needed" basis rather than keeping a whole big piece of data with all the consequences.

  Mylenium

• BlackBerry Smartphones Blackberry 9900 Bold startup screen 75% and white after.

  Hello forum!

  I have a problem with my Blackberry 9900 Bold. I have looked everywhere on the internet and found what my problem is: JVM errors. The only problem is that none of these solutions worked, solutions that have been published 4 to 2 years ago.

  Whenever I put in the battery and the phone turns on it loads up to about 75%, then apears white screen and stays like that for days. I tried to do an OS 7.0 to 7.1 upgrade, but after erasing data from the application loader when you try to start the JAVA virtual machine, it does not. I tried to connect to BBSAK, JL_CMDER and BBMCP, the only problem is that it is not connected, only for the application loader. Yes, I deleted Vendor.XML common files > Research In Motion. Every step that I found on the internet that it has been tested. My only question now is to obtain the identified BB JL_CMDER, BBSAK or BBMCP so that I can finally do a full erase.

  So please, dear forum users, if you have new information since 2013 I'm more than willing to test it and it works thankfully we.

  PROBLEM SOLVED!

  Correction problem of the white screen: use 9900_7_0Fast_Installers nuke the phone, then wipe it off. After that use your Application Loader after you delete the two files from the seller (there are thousands of threads on the files of the Application Loader and the seller).

  Here are the steps, if you have any other questions which answers are not yet available on the internet, feel free to reply to this message.

  See you soon!

• screen goes black and white after departure upward

  IM using windows vista I tried to reconnect the display monitor connections but still does not when I restart pc color lights up then goes black and white

   

  IM using windows vista I tried to reconnect the display monitor connections but still does not when I restart pc color lights up then goes black and white

  This is not a problem of IE.  Most likely a symptom of the use of the OS high-contrast mode accessibility option.   For example try to press LeftAlt + LeftShift + print to pass this parameter.

  Good luck

  Robert Aldwinckle
  ---

• Installed new module memory for laptop, found original was bad, while windows Vista does not start by going blank after the "status bar".

  I have a Windows Vista running on a Sony VIAO laptop and has been updated with level 3 to 4 GB of memory. During the memory test, I found that 2 GB of original module was bad and replace it with the new 2 GB module end back where I started with 3 GB. However, Windows starts only at a little past the rectangle with 3 points moving ("State Bar"?) and them it goes to black and the desktop never appears. I tried to roll back to the last working version of Windows settings, but always the same results.

  What can I do now? Is there a way to check and fix disk errors?  Is it possible to install Windows XP Pro or I have to go to Windows 7.  I even has System Mechanic Pro running on this laptop and it did help some casued the problem. It's as if the disc is damaged for some reason any.  Only with Vista felt this helpless.

  It seems to me that the new memory you have installed is bad or incompatible with the system.  First, remove all chips and reinstall them and then try to make sure that they are correct and secure again - don't just press them in place, effectively remove and the replacement and make sure they are in the right direction.

  Boot from the Installation of Windows Vista genuine disc (or you can borrow from someone) or a recovery disc with recovery options included in this topic. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer, or perhaps in SafeMode with network if it does not - that would be a good sign if it is true). You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.  Select recovery options and follow the instructions until you see the menu.  Once there, select the Windows Memory Diagnostic tool and run it and see what it says.  If it detects problems (and I suspect it might), you may need to replace the new chip memory.

  I hope this helps.  If this isn't the case, after return and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SCREEN BLACK WITH WHITE AFTER START POINTER

  I went on vacation and turned off my computer.  When I got home, I stupidly plugged in my blackberry storm, while the system was starting the system.  Now all I get is the black screen with the white pointer stupid.  I tried the solution of Task Manager and a few others who were listed in the similar questions to no prevail.  At one point I did a boot repair tool and he returned with it could not repair the iso standards, ico or something like that.  I did a system restore to an earlier date to before I left and that did not help.  Please help me.  Thank you.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "On the splash screen, it says can not find script file"c:\windows\run.vbs "and on top of that, my screen is empty

  Original title: computer problem

  "Last night I turned on my computer and the screen starts it sayscannot find script file"c:\windows\run.vbs "and on top of that, my screen is empty. I tried to run in safe mode, but I noticed the same problem. can anyone help

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting a message on the start screen.

  I suggest you to refer to the suggestions of ThrashZone replied on January 30, 2016 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/getting-an-error-message-when-turning-the-computer/77eb910c-Bebb-4fc0-bf58-db3ca7b90033

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Screen goes black and white after the computer starts.

  Original title: after starting Windows 7 everything is OK for a minute, then suddemly the screen is white and white and I Pascal t do anything or get into programs.

  After the start of Windows 7, everything is OK for a minute or two, then all of a sudden the screen goes white and blank and I can't move forward.  If I disconnect and try again.  Don't get into F8 either.

  Hi Eunice,

  Pilots, conflicts with other programs, malicious software and memory can cause starting problems.

  1. did you of recent changes on the computer before this problem?

  2. What is the brand and model of the computer?

  
  Method 1:
  We will first of all disconnect all external devices except the keyboard and mouse, if necessary and see if the problem is resolved.

  Method 2:
  If the problem persists, you can start the computer to the last good known Configuration and check if that helps.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows7/using-last-Knofwn-good-configuration

  Method 3
  If the problem persists, I suggest to perform a startup repair and check if that helps.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Error: "cannot open Volume for Direct access" is displayed when Chkdsk runs at startup

  Original title: Edit/Fix key in my registry

  CHKDSK keeps trying to run during startup, but "cannot open volume...". "If I can solve this problem, I want to put it in the manual, not automatic.      My registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rchelp is missing.   Can I remedy this by creating a text file with an REG extension and if so, where can I find the exact measurements to do?  It is the DOS Cmd or in Notepad?

  Hi BarneyBear,

  1 did you allow that chkdsk runs successfully at the start of the system?

  Editing registry is not necessary here. We recommend you to check if the disk check is scheduled.

  This problem can be solved by installing the latest service pack Windows XP.
  See the error message "Impossible open Volume for Direct access" When Chkdsk runs at startup

  See also, Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the downloadable software for a hp officejet pro 8600 more. running vista 64 with

  I'm running vista 64 on an asus p5qc with a q9550 with intel and 8 GB of ram. I downloaded the software for a hp officejet pro 8600 and it worked for a wireless configuration, while it stops. I was impossible to uninstall or install the program.

  Hello richardieo3,

  Try again with the doctor of printing:

  >> HP Print and Scan Doctor

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

  See you soon,.

  ferRx.

• Need drivers for 'Base system device' on dv9720us that running Vista Home Prem 64 bit

  Found the drivers for all devices on my computer except this...

  Am running Vista Home Premium 64-bit OS on the laptop HP dv9720us.

  Thank you!

  Have you installed card reader driver Ricoh HERE