screen is not locked

Similar Questions

• Acer Aspire Switch 10 SW5-012-16AA screen will not lock properly?

  Hi all

  I have an Acer Aspire Switch 10 SW5-012-16AA 2-in-1 removable laptop / Tablet and I bought it in February this year. Recently, I had the question of whether he is in charge, the power/control lock light no longer lights and now when I press the button, it isn't really lock the screen more that causes my battery dying too fast and the buttons being touched while it is in my bag. Any other button on that side works fine, it's just the power/lock button.

  Does anyone else have this problem? I'll see if this is covered by the warranty (if not human. I have additional coverage with another company) and see if it can be fixed? I use this for College and that is my only computer so I hope that's not dying on me already!

  Contact Acer, United States support service normally guaranteed 1 year:

  http://us.Acer.com/AC/en/us/content/service-contact

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• Screen of blackBerry Smartphones does not lock

  After pressing the locking button of the screen on the top of the torch, the screen turns off for 3-4 seconds and turns on automatically. the keyboard does not lock with this lock button and the screen stays on continuously, even if the backlight dim option is set to 20 seconds.

  Would amp, you reboot and see if it works correctly?

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• "Other identifying information" button on the lock screen does not allow me to switch user

  Hi all!

  It's a laptop running Windows 7 x 64 Pro, Member of the network of Microsoft's domain (Srv2008). Once a user logged - this is no "Switch user" button after closing session or when screen is just locked. Instead of him, I see the said button: "other credentials", click once on it gives me an option to connect to the back with the last connected account, use a scanner of finger for authentication (Lenovo laptops) has this feature or simply 'Cancel'

  I'd appreciate advice or a solution to the following problem, nothing in the domain network should not prevent connection administrator account and in this case, I was able to procceed after system restart.

  Thank you to

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!

• iPhone SE: rotation of the home screen does not work

  Hi guys,.

  I already looked for answers to this problem in discussions, but I couldn't find anything that solves the problem. Here's the situation:

  -brand new SE iPhone: he got yesterday and just imported my contacts, changed some settings and installed a few applications... that's all.

  -Home screen does not turn in landscape mode (my previous blackberry contact made it by default, so I'm used to doing all that on the phone horizontally keep and wasn't expecting such a problem with iPhone); rotation does not also happen in the app store. However, it runs perfectly landscape when you use applications (Calculator, messages, etc.).

  -J' tried the solutions suggested by other users in different threads:

  (1) checked the lock on the gray screen (it was off). tried to turn it on and then again on the way to see if the rotation is enabled without success.

  (2) looked in ' settings/display and brightness' to see if "zoom mode" has been activated to move it off but discovered that the iPhone SE (or his version of the iOS) has no "zoom mode" option in this Panel... no problem, but no solution: /.

  (3) I think that try a reset should not be necessary, that the phone is brand new and it behaved like that the first time I have it turned on (I reason?).

  (4) I read that some versions of the iPhone (for example 6) do not have the "home screen rotation" function (which, to me, seems completely absurd) and, supposedly, you can use the phone in portrait mode, while the 6s for a reason any the available option: the specs should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  Thank you all in advance... I hope that someone will come up with a solution because I know, it seems a stupid thing, but for me, it's terribly boring.

  the plug should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  To my knowledge, no.

  Barry

  P.S. I have a.

• My screen does not rotate

  Hi my iPhone screen 6 does not turn

  Hello

  Slide the Panel from the bottom of the lock on control of the home screen is not lit.

  Sdoes does not turn for some applications.

  See you soon

  Brian

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Click on Mini L9W-B-102 screen do not rotates

  Hi, I bought a Satellite click on Mini L9W-B-102 yesterday with pre-installed Windows 8.1. The screen is not auto rotation in tablet mode.

  I can see the padlock 'Settings' screen rotation option appear and disappear when I connect and disconnect the Tablet for the keyboard, but the screen does not turn in any apps/photos. I tried to operate the device market and stop several times. I checked the "AutoRotation" value in REGEDIT and it is set to 1.

  Any ideas much appreciated!

  I can see the padlock 'Settings' screen rotation option appear and disappear when I connect and disconnect the Tablet for the keyboard, but the screen does not turn in any apps/photos.

  The auto focus works only in tablet mode...

  

  When you use the tablet in 'portable' mode (attached keyboard) automatic orientation is locked!

  By the way: have you tested this automatic orientation without counting all the apps?

• right of the touch screen does not

  Hi apple, I dropped my iPhone 5 c not so long ago, and when I went to answer a text (my phone is locked with a password), I went to type my password in and the right side of my screen does not work, I tried to plug my phone into my computer , but it does not leave my access it from there because its locked and I cannot get in, is there a way to fix this? I can't lose anything on my phone because that have extremely important things on it and its not fully supported until that date.

  Thank you

  It is most likely just be a screen issue that will be fixed with replacing the screen.  Assuming that you are out of warranty and do not have Applecare... Your option at Apple is a permutation of the screen for $129 - make sure you call ahead and confirm that your Apple Store makes replacements of the screen in the House, many do not.  Apple offers a replacement by mail from the screen.

  Your independent repair option would be similar - find a local store reviewed well, providing a guarantee of at least 3 months on the repair, ideally 6 months or life.   Now would cost about $75 - $110 for a 5 series phone.   Do not take a shop based on price because of alternative screens vary in quality a little.   Find a store that uses parts of original quality and is backed by the best guarantee.

• How can I get casscade toolbar at the top of the screen and not on the side

  taskbar

  How can I get casscade toolbar at the top of the screen and not on the side

  How can I get casscade toolbar at the top of the screen and not on the side

  If you mean that you want the taskbar to be placed at the top of the screen...

  Right-click on the taskbar, don't check that no check mark to 'lock the taskbar '.

  Method 1:

  Left-click in the taskbar and HOLD > drag the taskbar to the top of the screen.

  Method 2:

  Right click on the task bar > click Properties > tab taskbar at the top > in place of the taskbar on the screen, click on the pointer, and then select top > click OK when finished.

• I got blue screen and now my elitebook 8440p screen does not come on at all

  I installed TuneUp Utility and after use and restart my system, I got blue screen. I restarted in safe mode and still had the blue screen. Now, my screen does not come on at all. When I start it up, all the lights come on. caps and num locks juices flashes three times and turns off.
  I don't know what that is... problem can someone help pls?
  thnx Toffby

  If the lights Flash 3 times when its engine, it is a failure of RAM or problem with RAM slot on the motherboard. You can find more information here

• Z10 Z10 blackBerry screen does not black out during call

  My screen Z10 won't black during the call when I place the phone to my ear, which causes unwanted press icons or sometimes call disconnects because my ear touches the end call icon. I have to manually lock the screen using button lock, which is irritating.

  Is this a setting that I am missing, because she worked very well about 2 weeks ago and has started to happen suddenly. I have used for about a year now.

  There is no settng. Here are a few ideas.

  Use BBVE to test the proximity sensor.

  If you use a screen protector, remove and test.

  Try rebooting and testing, if you have not already. If you have tried, then turn off the unit, remove the battery for a few minutes, put the battery and test.

  If all else fails, do a clean install of the operating system and test. If the problem stays on a BONES clean before you restore or add apps, I would conclude that the probe has probably failed.