Screen Messages Yosemite sharing stops pretty quickly

Similar Questions

• Sharing in the screen Messages does not work

  Does anyone know how to get the service (list) in messages to work screen sharing.  This function seems to have been overlooked by apple for some time now.  I can get the voice, text and video/voice at work just find the problem is screen sharing.  Everyone in my friends list and I are running 10.11.6.  I use the screen based on sharing successfully for 2010, but I noticed, he started to get progressively worse with each update of the OS, so far I can't see what the problem is to avoid its use.

  Someone in the community using the sharing feature more screen?  I want to tell screen sharing between the point of being able to manipulate another user (buddies) desktop and vice versa.

  I use a processor I7 3.5 Ghz of 2013 iMac 27 ", 32 GB of memory with Nvidia Geforce GTX 780 M 4 MB, storage Cap 3TO.

  I use the version 9.2 Messages (5100).

  I have set up accounts in messages using gmail and Apple account.

  Five hours on the phone with apple support to include level 2 support and nothing.  Most of the support people didn't even know what I was talking about the app function.  Oh, and apple representatives cannot explain issue you an engineer or a programmer

  In any case, I sure would appreciate anyone who is able to fix this problem.

  .... Noticed that I have not spelled some words in my first post, but I am very frustrated with this problem and the time that I have spent so far of no use.

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• When I try to open windows media center my Blue computer screen and my computer stops

  When I try to open windows media center my Blue computer screen and my computer stops

  Hello

  More that might help.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• My computer date deadline and I get a blue screen message

  My computer is less than 60 days old, and now for a week, he stops (crashes) at least once a day. When I reboot, I get a blue screen message. I have vista with all kinds of measures to protect against viruses and worms. Automatically, it downloads and installs the updates daily and other than that I have not downloaded or installed anything from the internet.
  Microsoft Geeeeeee, I am not a Curmudgeon and don't know how to fix my machine. I just need (and wait) a reliable system that works! What is the problem and how to fix it? Thank you.

  Thank you very much for your answer, but I have read far more after my post and understood how to correct the problem. Microsoft has created two UPDATES of BAD August 27. in safe mode and I went to my control panel, see updates, uninstalled the 2 bad edits. I don't remember the exact numbers, but one was 36xx and the other was 29erxx.  Now, my computer is fine. If anyone who reads this message is having the same problem, go to the blue screen and updates of messages to read on how to solve the problem.

  How is BTW, that microsoft has put 2 updates of bad anyway? You should be ashamed for causing problems for your customers!

• Windows Vista black after login screen and Explorer has stopped working error

  Hello world

  I have a very big problem. Whenever I connect to my computer that is running Windows Vista Ultimate Edition all I get is a black screen and a mouse pointer. I can use Ctrl + Alt + Del or Alt + Ctr + Shift lift the the Task Manager, and from there I can run firefox. Once in Firefox I can use the option open the file to find programs, do a right-click and then run them. But I want my back office. When I try to run Explorer from the Task Manager and then I get an error message saying it stopped and must be closed. I also keep getting an error message for something like 'Windows Search Protocol Host' or somesuch. A large part of time that this will just about a five-minute cycle in a style of window minimized down thing then the error message poopping upwards. I am also quite unable to open Control Panel or MSCONFIG. Whenever I try that they freeze and I get an error message saying that they have a problem and need to close. Also I did not change my software recently. In fact it worked fine yesterday when I was with Photoshop Elements 7.0. Another thing that can help anyone trying to find an answer that is in most of the forums help I saw people talking about going into regedit (something I CAN open it) and put the shell on explorer.exe. Mine is already set to explorer.exe. It is also something else that many videos help and forums have said I should close explorer.exe in Task Manager process tab, then run it again. I don't have an explorer.exe in the processes tab and when I try to run it I just get "WIndows Explorer has encountered a problem and needs to close."

  Please help people, I'm going nuts without a desk job.

  PS. I use the computer with the problem to type this.

  Hi, Eric D1979,.

  Glad that you've found the malware but it would be very wise to check further as there is no program can
  detect and remove any malware, and often some that is easy to find is bundled with others which are very difficult
  and later you really be touched when it is active. Better to be safe now than sorry later.

  Hello

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The xbox 360 Media Player no longer plays music after that I upgraded my CPU. Error message: media sharing service has been terminated

  Original title: the xbox 360 Media Player plays more music after I upgraded my CPU

  I have Vista 64 SP2.  The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.

  I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• I did a factory restore and still get the blue screen message.

  Separated from this thread.

  I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8004A7E1D8
  BCP3: 00000000B 6000000
  BCP4: 0000000000010015
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050515-27159-01.dmp
  C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi papreps,

  Thanks for posting your query on the Microsoft Community.

  As the posts above mention, the problem comes from your drivers.  Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.

  I suggest you to download and install the latest drivers from the manufacturer's Web site.

  Try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  , Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.

  Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.

  Keep us posted on the State of the question, we will be happy to help you.

• Message Notification has stopped working on the upgrade of Maverick

  New Message of Notification stopped working since I upgraded in Maverick.

  Help, please...

  

  I found the 'solution' of my problem. It has been... 'My State '! I put it to "DND" and the app stop all notifications!

  It is not intuitively!

  Developers of Skype, please inform users about this behavior in the Notifications on Preferences tab!

• How do you get the screen message appears only one for each case?

  Hi friends,

  I'm here with another question...

  I built a VI that must contain 6 boxes, when a particular check box is selected by the user, it should display a message to the user that the checkbox is enabled.

  My problem is: when I select one of the boxes the on-screen message continuously one after the other, even when you press the OK button.

  Can someone help me please?

  An option button allows only a boolean in it to be active at a time.  You see these things all the time.  Think about a survey that only lets you select one option.

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• Help - Tablet Iconia B1 - get messages "Email service stopped because of the weak campaigns"

  Hello

  When switching on my B1 Iconia Tablet I get message "Email service stopped because of the weak campaigns" and "you can delete the unused e-mail or applications to retrieve campaigns."  Also when trying to download a new application, which is not allowing them installed indicating the space of campaigns.

  However, there is much space of campaigns as the shelf a time the built in memory and an extra memory card. Details under settings under campaigns shows:
  Space total 0.98 GB
  Apps (content data & media app) 792 MB

  SD INTERNAL
  12,39 GB total space
  Apps (content data & media app) 332MB
  Photos, video 9.48 MB
  Audio (music, ringtones, podcasts, etc.) 20,00 KB
  Download 7.25 MB
  Available 12,03 GB

  SD EXTERNAL
  29,49 GB total space
  Available 27,00 GB

  As you can see from the above information there are plenty available storage space on the shelf.
  Also I changed nothing with regard to the settings since the Tablet (about 3 months) so it still has factory settings.

  Please can you advice how to fix this problem so that email and download installation restored to the tablet.  I would appreciate it if all instructions to solve the problem can be detailed step by step easy to follow.

  Thank you

  If you go into settings, on the Tablet, which is listed under the device information?

  I think that the main problem you see is that the email app is eager store items in the 'main' part of the files, not the SD card internal or external space.  If you are looking to ~ 200 MB total space, which may be too weak so that it can consider the space of "viable."  (1 GB-800 MB = 200 MB)

  I suggest you move the extra apps, etc. from the main space on the SD storage.

• I can do almost anything without a screen message (MS Removal Tool) arise

  original title: Virus Apparent attack

  It seems that a virus has attacked my computer and I can hardly do anything without a screen message (MS Removal Tool) arise and a ball of toolbar, indicating that the TPSrv.exe file is infected and to activate my antivirus software. Have not been able to use the system restore. Anyone have any ideas?

  Hello

  MS Removal Tool is a fake antivirus, a scam to force you to pay for it, while it has no advantage at all.

  Remove MS Removal Tool (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-Ms-removal-tool

  How to remove MS Removal Tool (uninstall Guide)<-- read="">
  http://deletemalware.blogspot.com/2011/03/how-to-remove-Ms-removal-tool-uninstall.html

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and double-click it
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it - double click on it

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  RUN-> MRT.exe

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it - double click on it
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it - double click on it

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google for
  see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  These also to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in-

  sfc/scannow

  Then run checkdisk

  RUN - type in

  Chkdsk /f /r

  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  I came to doday to find that a blue screen on my pc .This is the error number.

  Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  Please provide additional information on your system:
  What is your system brand and model?
  What is your version of XP and Servie Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and everything seems
  be personal information for you, just delete pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.
  While you wait for analysis, no matter what you use for protection against malware, please follow these steps:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!